User Manual
Table of Contents TABLE OF CONTENTS 02 INTRODUCTION TO YOUR DASH CAM 03 USING CCTV IN A COMMERCIAL ENVIRONMENT 04 PRECAUTIONS / CAUTIONS ON USING THIS PRODUCT 05 FCC STATEMENT 06 FCC-SUPPLIER’S DECLARATION OF CONFORMITY 07 PRODUCT SPECIFICATION 08 PACKAGE CONTENTS / PRODUCT FEATURES 09 POWERED GPS MOUNT 10 FRONT FACING CAMERA - PARTS & CONTROLS REAR FACING CAMERA - PARTS & CONTROLS 11 - 16 17 IN VEHICLE INSTALLATION 18 - 21 CONNECTING YOUR DASH CAM TO CAM VIEWER APP 22 - 23 INSTALLI
Introduction to your Dash Cam The Nextbase range of Dash Cams have been designed specifically with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Basic operation The Dash Cam is set to record video, in files 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
Using CCTV in a Commercial Environment The 380GW can be used in a private vehicle or in a commercial environment. If being used in a commercial environment certain standards must be adhered to. 4. Using a suitable permanent marker pen please add contact details for CCTV / Data controller, before applying stickers to your vehicles windows When using the NEXTBASE 380GWX in a commercial vehicle you must ensure that you comply with any applicable legislation set out by the Government in your location.
Precautions Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. Radio Frequency Band and Power Information WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing Hereby, Portable Multimedia Limited declares that the Radio Equipment type 380GWX is in compliance with the following directive 2014/53/EU.
Declaration of Conformity FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC - SUPPLIER'S DECLARATION OF CONFORMITY STATEMENT SUPPLIER'S DECLARATION OF CONFORMITY (47 CFR Section 2.906). We; Tank Design 5. FCC Marking Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below: 6. Responsibilities and obligations Strictly follow the FCC rules of 2.906, 2.908, 2.909. 1. Applicant's Info Company Name: Portable Multimedia Ltd 7.
Product Specification Model Number / Name NBDVR380GWX NBDVR380GWX Rear Camera Power Requirements 5V / 1.5A Video and Power supplied through connection to Dash Cam. Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm / 1.5A Output: 5Vdc Video and Power supplied through connection to Dash Cam. Sensor Resolution 2.12M Pixel 2.12M Pixel Lens Type / Angle / Aperture 6G / 140° / F1.8 6G / 140° / F1.
Package Contents Product Features Please check the contents of your NEXTBASE product. Thank you for purchasing this Nextbase Dash Cam, in this section we will outline some of the features available with this Dash Cam. Dash Cam, Mount, & Rear Facing Camera Module Car Power Cable USB Cable Security Pack Your Dash Cam and Rear Camera can record both the road and the road behind you Charge your Dash Cam in you vehicle using the Car Power Cable. Connect your Dash Cam to your PC.
Powered GPS Mount Please see below to identify the parts of the supplied GPS mount. 4 3 1 NBDVR380GWMNT Locking Pins These pins will locate and then allow the camera to be attached to the mount. 5VDC-IN 2 For use with 90 connector 2 5VDC-IN For use with straight connector DC-IN Sockets There are two sockets available, one for use with the supplied 90° car adaptor, the other for use with the Nextbase Hardwire Kit (sold separately) which uses a straight connector.
Front Facing Camera - Parts and Controls Please see below to identify the parts and controls of your Dash Cam. Left side: 1 Side Cover There are two types of side cover supplied: Standard covers: These are fitted when the Dash Cam as standard and are used during normal operation. Remember to replace the side cover before use. Locking covers: Included within the Security Pack are two locking covers, these can be secured to the Dash Cam using the supplied anti-tamper screws.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Right side: 1 1 Side Cover Removable side cover, remember to replace the side cover before use. 2 Anti-Tamper Screw Insert Insert thread for the anti-tamper screw. 3 USB Socket Connect the supplied USB data cable here to connect the Dash Cam to a computer. Note: During normal use the car power cable is connected to the mount, not directly to this socket.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Top side: 1 2 LED Indicators The functions of the three LED indicators are described in the below table.
Front Facing Camera - Parts and Controls (contd.) 2 Speaker Used for the two types of ‘notification’ sounds. Sounds: There are two sounds, these are used to identify when recording starts and stops. 4 Wi-Fi Button & Indicator Press and hold the Wi-Fi button for 2 seconds to turn on the Dash Cam's Wi-Fi function. Once turned on, the button will flash slowly blue in colour, awaiting a connection from a smartphone / tablet etc. 1.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Bottom: Note: To format the SD Card using the camera, press and hold the Protect button for 6 seconds. The yellow LED will flicker during formatting. 2 1 Product: 380GWX Model: NBDVR380GWX FCC ID: 2AOT9-NBDVR380GWX 1 Mount to Camera Fixing Points The mount locking pins locate here when attaching the camera to the mount.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Front and Rear view: 1 1 Front Facing Camera Lens Wide angle 140° field of view. 2 Rear Cam connection point The USB-C connection point for the Rear Camera is located underneath the dust cover.
Rear Facing Camera - Parts and Controls Please see below to identify the parts and controls of your Dash Cam. Left and Right view: 1 2 1 Rear Facing Camera Lens Wide angle 140° field of view. 2 Rear Cam Cable Connection Cable 30 cm Rear Camera Connection Cable. Attach the 6.5m cable to connect the Rear Facing Camera to the Front Facing Camera. 3 LED Indicator The LED will turn on to indicate that the file is protected.
In Vehicle Installation 1 1 Remove Side Cover Using the finger nail slot, remove the right hand side cover, under which the SD card slot is located. 2 2 Insert micro SD Card Insert the MicroSD card here, taking care that the gold contacts are facing towards the bottom of the Dash Cam. 3 3 Replace Side Cover Click the side cover back in to place, with the curved edge engaging firstly.
In Vehicle Installation (contd.) 4 4 Remove Camera From Mount Slide the mount towards the camera lens to disengage the mount. 5 5 Remove Cable Lock The cable lock is in the corner of the mount and can be twisted away from the mount itself and then disengaged completely from the mount. 6 6 Connect Power Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90 connector’.
In Vehicle Installation (contd.) 7 7 Refit Cable Lock The cable lock can now be refitted by firstly inserting the tang fully and then rotating the cable lock until it engages fully around the power cable and then clicks in to place in the mount. The cable clamp can be secured to the mount to prevent un-authorised removal, see pages 31 for further details.
In Vehicle Installation (contd.) 10 Route the Cable Through your Vehicle’s Lining Make sure your Dash Cam is mounted securely on the windshield of your vehicle, in the position you use day-to-day. Connect the Rear Window Camera to the Dash Cam using the 6.5 m connecting cable, and run it through your vehicle to the rear window, stowing the cable within the headlining, using the Nextbase™ Cable Tidy Tool (included with your Dash Cam) if necessary.
Connecting your Dash Cam to the Cam Viewer App 1 Plug Cigarette Power Cable in to the Car Power Supply Connect the Cigarette lighter plug to the vehicles 12Vdc or 24Vdc supply. 2 Route the supplied car power cable (as shown) and connect it to the DC-IN socket of the mount. The Dash Cam will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on.
Connecting your Dash Cam to the Cam Viewer App (contd.) 4 5 3s 4 Turn On Wi-Fi Upon the 380GWX After the Dash Cam has powered on, then press the Wi-Fi button until the button starts to flash Blue in colour, to indicate that the Wi-Fi function is turned on and awaiting a connection. 5 Connect Mobile Phone to the 380GW With the Nextbase Cam Viewer APP working upon the smartphone / tablet, press “Connect to Dash Cam” and then choose the 380GWX Dash Cam.
Installing your Dash Cam - Front 1 2 1 Remove the 3M protective sheet Peel off the red layer to expose the 3M sticky pad beneath. 2 Locate and then check the 380GWX camera position using App Offer the Dash Cam towards the windscreen whilst looking at the Live View on the connected smartphone / tablet. Ensure that the Live View shows the desired image by moving the Dash Cam to the best position possible on the windscreen and adjusting the lens accordingly.
Installing your Dash Cam - Front 3 4 3 Apply mount to windscreen Lightly press the mount against the windscreen and double check that the image as seen upon the smartphone / tablet is correct. Make any adjustments if required, prior to pressing the Dash Cam firmly against the windscreen to ensure that the 3M tape is securely attached.
Positioning your Dash Cam Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle. - As per the installation instructions, you must install the camera so it does NOT obstruct the drivers view of the road, preferably behind the rear view mirror. - Whilst the camera clearly needs to view through the windscreen in an area swept by the windscreen wipers, the camera should be installed so as not to intrude significantly within the wiped area.
Installing your Dash Cam - Rear 1 2 1 Remove the 3M protective sheet Peel off the red layer to expose the 3M sticky pad beneath. 2 Position the Rear Facing Camera on the Rear Window It is advisable to place the Rear Facing Camera within the wiper zone towards the top of your rear window in order to record the clearest possible image. Ensure that the view is not obstructed by heating grid lines.
Installing your Dash Cam - Rear 4 4 Apply Mount to Rear Window Lightly press the mount against the rear window and double check that the image as seen upon your connected smartphone / tablet is correct. Make any adjustments if required, prior to pressing the Rear Cam firmly against the rear window to ensure that the 3M tape is securely attached.
Finished Dash Cam & Rear Cam Setup 29
Finished Dash Cam & Rear Cam Setup With your Front Facing Dash Cam and Rear Facing Camera installed, you should have a setup similar to the one below; both cameras facing out of their respective windows with no visual obstructions, letting you record both the road ahead, and the road behind. With the Dash Cam & Rear Cam successfully installed, you will be able to see the view from both the Front and Rear Cameras on the Cam Viewer app’s Live View. The Rear View will be present as a Picture in Picture (PiP).
Anti-Tamper Security Installation This allows the Dash Cam to be setup for 'Authorised use only', therefore preventing un-authorised operation, or removal of the camera. Three elements of anti-tamper security are available, which can be used individually or all together, as required. 2 Camera to Mount Locking Screw The camera can be secured to the mount to prevent un-authorised removal.
Cam Viewer - Introduction Nextbase Cam Viewer is a an APP specifically designed for use with the Nextbase range of Dash Cams and works with Android & iOS for use on Smartphones and tablets alike. See Product Specification section for minimum Operating System requirements. The APP allows you to watch the live view from your Dash Cam, make recordings, watch previous recordings and then download selected recordings accordingly.
Cam Viewer - Connect your Device Cam Viewer - Main Screen Once you have downloaded Nextbase Cam Viewer for your mobile device, you will need to turn on the Wi-Fi function on your Dash Cam. Once your mobile device is connected Cam Viewer will display the Main screen and you will see a live image from your Dash Cam as shown below:- 1 With the dash Cam powered on, press and hold the button until it starts to flash blue. The flashing indicates that the Wi-Fi function is turned on and awaiting a connection.
Cam Viewer - Live View and PiP With your Dash Cam successfully connected, you will be able to see the live image your Dash Cam is seeing by using the Live View Screen on the Cam Viewer app. With a Rear Camera attached, you will be able to see the live image from both the Front Facing Dash Cam and the Rear Camera, which will appear on your Live View as a PiP (Picture in Picture) in the top left.
Cam Viewer - Downloading Recordings Downloading Videos from your Dash Cam (iOS) Downloading Videos from your Dash Cam (Android) To download files from your Dash Cam to your mobile device first tap on the View Dash Cam Videos button on the Main screen. To download files from your Dash Cam to your mobile device first tap on the View Dash Cam Videos button on the Main screen.
Cam Viewer - Sharing Recordings Cam Viewer - Dash Cam Settings The Dash Cam settings are accessed via the Cam Viewer App, tap the ‘ ’ button to open the menu. Sharing Recordings From the menu select ‘Dash Cam Settings’. Once you have downloaded videos from your Dash Cam to your mobile device it is then possible to Share your videos online. In order to do this you will need to disconnect your mobile device from your Dash Cam Wi-Fi connection and connect to your usual Wi-Fi connection with internet access.
Cam Viewer - Dash Cam Settings (contd.) 3 Audio Recording Turn On / Off the microphone. Video Menu The default settings have been carefully selected to allow you to use the Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below. 4 Number Plate Enter the registration number for your vehicle, this will then be shown on the video file. Note - Menus are not accessible whilst the Dash Cam is recording.
Cam Viewer - Dash Cam Settings (contd.) 7 Time & Date Stamp Turn On / Off the time and date stamp shown on recorded files. Options: Off and On Default Setting: On Setup Menu The default settings have been carefully selected to allow you to use the Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below. Note: - Menus are not accessible whilst the Dash Cam is recording.
Cam Viewer - Dash Cam Settings (contd.) 3 Time This setting allows you to set the Time manually, if required during initial setup. Note: - The time will be overwritten when there is a subsequent satellite connection. 4 Date This setting allows you to set the Date manually, if required during initial setup. Note: - The date will be overwritten when there is a subsequent satellite connection.
PC Connection The dash cam has two available modes when connecting to a computer, these are: Mass Storage Mode (Windows and Mac) This mode is used to view, edit and share recordings using NEXTBASE Replay 3 playback software on your computer. Note: - Mass Storage mode is ‘read-only’, this means that content on the SD card can only be read, not updated or erased. Update Mode (Windows and Mac) This is used to Update the firmware on your Dash Cam, using NEXTBASE Replay 3.
Nextbase™ SD Cards Q&A For best results, we recommend using our Nextbase™ branded SD cards with your Dash Cam, available to purchase online from nextbase.com, or your nearest retailer. 16GB Approx 2 hours footage. 32GB Approx 4 hours footage. 64GB Approx 8 hours footage. 128GB Approx 16 hours footage. When using your Dash Cam with a Rear Facing Camera, a U1 or higher SD Card is required.
Trouble Shooting Problem Solution The Mount will not stay in place. Ensure that the red protective cover (plastic film) has been removed from the mount pad. Make sure that the glass is smooth and clean. Press the mount firmly to the glass ensuring that there is 100% contact with the glass. This can easily be seen from outside the windscreen, as contact area of the pad turns a darker colour. If the mount pad has lost it's sticky qualities, change the pad for the spare item contained within the box.
Trouble Shooting Problem Solution Video File playback is jumpy. Reformat the SD card to remove non-contiguous files. For best recording use a Nextbase branded U1 SD card of 8 to 128GB. PC may not be sufficient for the playback task, try a different PC. Copy the recorded video files onto the PC / Mac for playback directly rather than use the Dash Cam as a card reader. Reduce the resolution of the recording within the Dash Cam and record some new files to test if this is the problem.
Software License Agreement CE Mark Information (Conformité Europénne) The CE (Conformité Européenne) mark is a symbol (below) printed on products to indicates it’s conformity with health, safety, and environmental protection standards for products sold within Europe. It is used on many products across many industries (for example, SD cards) as a mark of compliance with European standards. In recent years, many variations of this mark have appeared in the market.
Warranty Limited Warranty This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state (or by country or province). Nextbase™ does not exclude, limit or suspend other legal rights you may have under the laws of your state (or country or province). For a full understanding of your rights you should consult the laws of your state, country or province. Nextbase™ Liability extends to the cost of the Dash Cam alone.
More Nextbase™ Products Dash Cams Eyes on the Road Nextbase™ Services and Software Nextbase™ offers a wide range of Dash Cams to best suit your driving needs. Rear View Cameras Ready for the Drive The new rear facing cameras offer views on the road behind as well as ahead, protecting you from all angles. MyNextbase.com Cloud™ MyNextbase Connect™ MyNextbase Player™ Access your footage anywhere in the world using the free online web portal.
Dash Cam Functions Nextbase™ Emergency Response Nextbase™ Module Cam Compatible (Rear Cam, Rear Facing Cam) Nextbase Cloud™ Storage MyNextbase Player™ MyNextbase Connect™ 47
NBDVR380GWXRCB-IM-ENG-R9
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.