DASH CAM SETTINGS The Dash Cam settings are accessed via the Cam Viewer App, tap the ‘ ’ button to open the menu. From the menu select ‘Dash Cam Settings’. MENU Dash REC REC Cam Settings Dash Cam Update Disconnect Dash Cam FAQs About Acknowledgements Acceptable Usage Policy Visit Nextbase.co.uk VIEW DASH CAM VIDEOS VIEW DOWNLOADED VIDEOS VIEW DASH CAM VIDEOS VIEW DOWNLOADED VIDEOS See following pages for full details of the various settings available.
DASH CAM SETTINGS (CONTD.) Video menu: The default settings have been carefully selected to allow you to use the Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below. Note: - Menus are not accessible whilst the Dash Cam is recording.
DASH CAM SETTINGS (CONTD.) Video menu continued: 3. Audio Recording Turn On / Off the microphone. Options: On and Off Default Setting: On 4. Number Plate Enter the registration number for your vehicle, this will then be shown on the video file. 5. Video Length Select the duration of the individual recorded video files. The Dash Cam will continue recording, filling the memory card. When the memory card becomes full, the oldest file will be automatically deleted to make space for the new recording.
DASH CAM SETTINGS (CONTD.) Video menu continued: 7. Time & Date Stamp Turn On / Off the time and date stamp shown on recorded files. Options: Off and On Default Setting: On 8. Speed Stamp Turn On / Off the Speed Stamp shown on recorded files. Options: On and Off Default Setting: On 9. GPS Location Stamp Turn On / Off the GPS co-ordinates that are shown on recorded files. When a recording is viewed using the supplied NEXTBASE Replay playback software the GPS co-ordinates remain available.
DASH CAM SETTINGS (CONTD.) Setup menu: The default settings have been carefully selected to allow you to use the Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below. Note: - Menus are not accessible whilst the Dash Cam is recording.
DASH CAM SETTINGS (CONTD.) Setup menu continued: 2. Format SD Card Format the inserted memory card. This will delete all content upon the SD card. The SD card can also be formatted by pressing and holding the Protect button for 6 seconds, the yellow LED indicator will flash (quickly) during formatting. Note: - For stable performance, it is recommended that you format the memory card every 2 weeks. Of course, you should only do this AFTER you've downloaded any files from the card that you may want to keep.
DASH CAM SETTINGS (CONTD.) Setup menu continued: 8. Sounds Turn Off / On the device sounds, these will cancel the notification Sounds and also the Startup & Shutdown chimes. Options: On and Off Default Setting: On 9. Announcements Turn Off / On the spoken announcements, these are heard when there is no SD card inserted or the SD card has an error and needs to be formatted using the Dash Cam. Options: On and Off Default Setting: On Note: - Announcements are currently only available in English. 10.
PC CONNECTION The dash cam has two available modes when connecting to a computer, these are: Mass Storage Mode (Windows and Mac) This mode is used to view, edit and share recordings using NEXTBASE Replay 3 playback software on your computer. Note: - Mass Storage mode is ‘read-only’, this means that content on the SD card can only be read, not updated or erased. Update Mode (Windows and Mac) This is used to Update the firmware on your Dash Cam, using NEXTBASE Replay 3.
TROUBLE SHOOTING PROBLEM SOLUTION The mount will not stay in place upon my windscreen. Ensure that the red protective cover (plastic film) has been removed from the mount pad. Make sure that the glass is smooth and clean. Press the mount firmly to the glass ensuring that there is 100% contact with the glass. This can easily be seen from outside the windscreen, as contact area of the pad turns a darker colour.
TROUBLE SHOOTING (CONTD.) PROBLEM SOLUTION The battery only lasts 15 minutes. This is normal, the battery is primarily for use with Parking Mode on a switched live power supply and NOT intended as an alternative power source to replace the supplied car adaptor. The Dash Cam cannot lock onto satellite. After power on and with the device mounted with clear view of the sky it can take up to 10 minutes to find the three satellites required to achieve a stable signal.
