Instruction Manual
TABLE OF CONTENTS TABLE OF CONTENTS ...................................................................................................... 02 INTRODUCTION TO USING A DASH CAM ........................................................................... 03 USING CCTV IN A COMMERCIAL ENVIRONMENT ............................................................... 04 PRECAUTIONS ..................................................................................................................
INTRODUCTION TO USING A DASH CAM The Nextbase range of Dash Cams have been designed specifically with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Basic operation. The Dash Cam is set to record video, in files 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
USING CCTV IN A COMMERCIAL ENVIRONMENT When using the NEXTBASE 380GW in a commercial vehicle you must ensure that you comply with any applicable legislation set out by the Government in your location. The following guide is written for usage of the product in the UK. UK requirements include but are not limited to the Data Protection Act, the CCTV Code of Practice and the Surveillance Camera Code of Practice.
USING CCTV IN A COMMERCIAL ENVIRONMENT (CONTD.) 4. Using a suitable permanent marker pen please add contact details for CCTV / Data controller, before applying stickers to your vehicles windows 5. The Data Controller is responsible for ensuring that all Dash Cam operators/drivers are aware of their responsibilities regarding the data being recorded.
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC - SUPPLIER'S DECLARATION OF CONFORMITY STATEMENT SUPPLIER'S DECLARATION OF CONFORMITY (47 CFR Section 2.906). We; Tank Design Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below: 1. Applicant's Info Company Name: Portable Multimedia Ltd Mailing Address: Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK Contact: Graham Lambert Tel: +44 02920 866429 Email Address: Support@nextbase.
FCC STATEMENT SUPPLIER'S DECLARATION OF CONFORMITY CONTINUED 5. FCC Marking 6. Responsibilities and obligations Strictly follow the FCC rules of 2.906, 2.908, 2.909. 7. Applicant's Authorization Company Name: Portable Multimedia Ltd Mailing Address: Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK Contact Person: Graham Lambert Signature: Email Address: Support@nextbase.co.uk Tel: +44 02920 866429 Date: TBC 8. Responsible party in US.
PRODUCT SPECIFICATION Model Number NBDVR380GW Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm / 1.5A Output: 5Vdc Sensor Resolution 2.12M Pixel Lens Type / Angle / Aperture 6G / 140° / F1.
PACKAGE CONTENTS Please check the contents of your NEXTBASE product. Dash Cam & Car Power Cable GPS Mount Window Sticker CCTV Window Sticker (3pcs) USB Cable Security Pack Quick Start Guide Manual, CCTV Pack & Software Disk Quick Start Guide Product appearance may differ slightly to that shown above. PRODUCT FEATURES Thank you for purchasing this NEXTBASE Dash Cam, in this section we will outline some of the features available with this Dash Cam.
POWERED GPS MOUNT Please see below to identify the parts of the supplied powered GPS mount. 4 3 2 5 1 Made in China 1. Locking pins These pins will locate and then allow the camera to be attached to the mount. 2. DC-IN sockets There are two sockets available, one for use with the supplied 90 car adaptor, the other for use with the Nextbase Hardwire Kit (sold separately) which uses a straight connector. Please contact your Nextbase retailer to purchase the Nextbase Hardwire Kit. 3.
CAMERA - PARTS & CONTROLS Please see below to identify the parts and controls of your Dash Cam. Left side: 1 Reset 2 3 1. 4 5 6 Side cover There are two types of side cover supplied: Standard covers: These are fitted when the Dash Cam as standard and are used during normal operation. Remember to replace the side cover before use. Locking covers: Included within the Security Pack are two locking covers, these can be secured to the Dash Cam using the supplied anti-tamper screws.
CAMERA - PARTS & CONTROLS (CONTD.) Left side continued: 4. Power & Start / Stop recording button Long press (2 seconds) power On/Off the Dash Cam. Short press to start / stop recording. 5. Camera to Mount locking screw The camera can be secured to the mount to prevent un-authorised removal, see pages 30 - 31 for further details. 6. Microphone Integral microphone for audio recording, this can be turned off via the Cam Viewer App.
CAMERA - PARTS & CONTROLS (CONTD.) Please see below to identify the parts and controls of your Dash Cam. Right side: 1 2 5 4 3 1. Side cover Removable side cover, remember to replace the side cover before use. 2. Anti-tamper screw insert Insert thread for the anti-tamper screw. 3. USB socket Connect the supplied USB data cable here to connect the Dash Cam to a computer. Note: - Normally the car power cable is connected to the mount when in use, not directly to this socket. 4.
CAMERA - PARTS & CONTROLS (CONTD.) Top: 2 3 1 4 1. LED indicators The functions of the three LED indicators are described in the below table. LED Colour Blue Red Yellow Function Battery Power GPS Slow Flash Fast Flash Low Battery Warning Recording Updating FW Searching for GPS Lock Formatting SD Card Solid Battery Charging Power On GPS Locked Note: - The blue LED will only function when there is a NEXTBASE 380 Battery Pack installed, this is sold separately.
CAMERA - PARTS & CONTROLS (CONTD.) 2. Speaker Used for the two types of ‘notification’ sounds. Sounds: There are two sounds, these are used to identify when recording starts and stops. 1. Start recording A three-tone beep sound (ascending) will be heard when recording starts. 2. Stop recording A three-tone beep sound (descending) will be heard when recording stops.
CAMERA - PARTS & CONTROLS (CONTD.) 3. Protect button & indicator Press the protect button whilst recording to protect the current file, the button will illuminate, red in colour indicating the file is protected. Depending on at which point during the current recording the file is protected, the camera will also save the previous or subsequent recordings, as follows:If the protection takes place during the first 3rd of the recording, the previous recording will also be protected.
CAMERA - PARTS & CONTROLS (CONTD.) Bottom: Note: To format the SD Card using the camera, press and hold the Protect button for 6 seconds. The yellow LED will flicker during formatting. 2 Made in China 1 1. Mount to camera fixing points The mount locking pins locate here when attaching the camera to the mount. 2. Battery compartment For use with the battery pack (sold separately), required if using the Parking Mode function on a 'switched' live power source, i.e.
IN VEHICLE INSTALLATION 1. Remove side cover Using the finger nail slot, remove the right hand side cover, under which the SD card slot is located. 2. Insert micro SD Card Insert the MicroSD card here, taking care that the gold contacts are facing towards the bottom of the Dash Cam.