Installation Instructions

IN VEHICLE INSTALLATION (CONTD.)

7. Refit cable lock

The cable lock can now be refitted by firstly inserting the tang fully and then rotating the cable

lock until it engages fully around the power cable and then clicks in to place in the mount.

The cable clamp can be secured to the mount to prevent un-authorised removal, see pages

30 - 31 for further details.

8. Refit camera to mount

Offer the mount to the camera to engage the locking pins and then slide the mount away

from the camera lens to engage the mount connections fully.

PAGE 1
IN VEHICLE INSTALLATION (CONTD.) 7. Refit cable lock The cable lock can now be refitted by firstly inserting the tang fully and then rotating the cable lock until it engages fully around the power cable and then clicks in to place in the mount. The cable clamp can be secured to the mount to prevent un-authorised removal, see pages 30 - 31 for further details. 8.
PAGE 2
IN VEHICLE INSTALLATION (CONTD.) 9. Download and install the APP Visit the appropriate APP store for your smartphone / tablet and download the Nextbase Cam Viewer APP. Install the APP upon your device and then open the APP in readiness to connect to the Dash Cam. Cam Viewer 10. Plug Cigarette Power cable in to the car power supply Connect the Cigarette lighter plug to the vehicles 12Vdc or 24Vdc supply. Continued on next page.
PAGE 3
IN VEHICLE INSTALLATION (CONTD.) Route the supplied car power cable (as shown) and connect it to the DC-IN socket of the mount. 12-24V DC The above diagram is for illustration purposes only. The Dash Cam will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on.