IN VEHICLE INSTALLATION (CONTD.) 15. Apply mount to windscreen Lightly press the mount against the windscreen and double check that the image as seen upon the smartphone / tablet is correct. Make any adjustments if required, prior to pressing the Dash Cam firmly against the windscreen to ensure that the 3M tape is securely attached. 16.
IN VEHICLE INSTALLATION (CONTD.) Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle. As per the installation instructions, you must install the camera so it does NOT obstruct the drivers view of the road, preferably behind the rear view mirror. Whilst the camera clearly needs to view through the windscreen in an area swept by the windscreen wipers, the camera should be installed so as not to intrude significantly within the wiped area.
ANTI-TAMPER SECURITY INSTALLATION This allows the Dash Cam to be setup for 'Authorised use only', therefore preventing un-authorised operation, or removal of the camera. Three elements of anti-tamper security are available, which can be used individually or all together, as required.
ANTI-TAMPER INSTALLATION (CONTD.) 2. Camera to Mount locking screw The camera can be secured to the mount to prevent un-authorised removal. Remove the two side covers to gain access to the ‘camera to mount’ locking screws, these are found on both sides of the camera. With the camera attached to the mount and using the supplied security screwdriver, loosen the two anti-tamper screws, taking care NOT to remove them fully. Slide the anti-tamper screws down into the ‘locked’ position and then re-tighten.
CAM VIEWER - INTRODUCTION Nextbase Cam Viewer is a an APP specifically designed for use with the Nextbase range of Dash Cams and works with Android & iOS for use on Smartphones and tablets alike. See Product Specification section for minimum Operating System requirements. The APP allows you to watch the live view from your Dash Cam, make recordings, watch previous recordings and then download selected recordings accordingly.
CAM VIEWER - CONNECT YOUR DEVICE Connecting your mobile device to your Dash Cam Once you have downloaded Nextbase Cam Viewer for your mobile device, you will need to turn on the Wi-Fi function on your Dash Cam. With the dash Cam powered on, press and hold the button until it starts to flash blue. The flashing indicates that the Wi-Fi function is turned on and awaiting a connection. The Dash Cam will appear as NEXTBASE 380GWA xxx, within the available networks seen on your mobile device.
CAM VIEWER - MAIN SCREEN Main screen Once your mobile device is connected Cam Viewer will display the Main screen and you will see a live image from your Dash Cam as shown below:- 1 REC 2 3 VIEW DASH CAM VIDEOS VIEW DOWNLOADED VIDEOS 4 From within the Main screen you can select Live View, view recordings stored on your Dash Cam or recordings that have previously been downloaded to your mobile device. You can also access the Nextbase Cam Viewer Menu options. 1.
CAM VIEWER - DOWNLOADING RECORDINGS Downloading Videos from your Dash Cam (iOS) To download files from your Dash Cam to your mobile device first tap on the View Dash Cam Videos button on the Main screen. Nextbase Cam Viewer will then display a list of videos stored on your Dash Cam as shown below:- DASH CAM VIDEOS 150118_185507_003.MOV 336 MB 15th Jan 2018 / 18:55 150118_195507_004.MOV 336 MB 15th Jan 2018 / 19:55 150118_205507_005.
CAM VIEWER - DOWNLOADING RECORDINGS Downloading Videos from your Dash Cam (Android) To download files from your Dash Cam to your mobile device first tap on the View Dash Cam Videos button on the Main screen. Nextbase Cam Viewer will then display a list of videos stored on your Dash Cam as shown below:- DASH CAM VIDEOS 150118_185507_003.MOV 336 MB 15th Jan 2018 / 18:55 150118_195507_004.MOV 336 MB 15th Jan 2018 / 19:55 150118_205507_005.
CAM VIEWER - SHARING RECORDINGS Sharing recordings Once you have downloaded videos from your Dash Cam to your mobile device it is then possible to Share your videos online. In order to do this you will need to disconnect your mobile device from your Dash Cam Wi-Fi connection and connect to your usual Wi-Fi connection with internet access. You should then tap on the View Downloaded Videos button on the Nextbase Cam Viewer Main screen.