Installation Instructions

IN VEHICLE INSTALLATION (CONTD.)

3. Replace side cover

Click the side cover back in to place, with the curved edge engaging firstly.

4. Remove camera from mount

Slide the mount towards the camera lens to disengage the mount.

PAGE 1
IN VEHICLE INSTALLATION (CONTD.) 3. Replace side cover Click the side cover back in to place, with the curved edge engaging firstly. 4. Remove camera from mount Slide the mount towards the camera lens to disengage the mount.
PAGE 2
IN VEHICLE INSTALLATION (CONTD.) 5. Remove cable lock The cable lock is in the corner of the mount and can be twisted away from the mount itself and then disengaged completely from the mount. 6. Connect power Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90 connector’. Note: - The Nextbase hardwire kit connector will utilize the mini USB socket marked ‘For use with straight connector’.