User Manual
Introduction to your Dash Cam This range of Nextbase™ Dash Cams has been designed specifically with ease of use in mind; it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Please check the firmware version of the Dash Cam, the version can be found in the Setup menu under System Info. The latest versions are available to download from our website, where you can download and update when necessary. www.nextbase.
Table of Contents INTRODUCTION TO USING AN IN-CAR CAM 02 EMERGENCY SOS FREQUENTLY ASKED QUESTIONS 28 TABLE OF CONTENTS 03 MYNEXTBASE 29 PRECAUTIONS / CAUTIONS ON USING THIS PRODUCT 04 VIDEO MODE / PLAYBACK MODE 30 PRODUCT WARNINGS 05 VIDEO MODE / PHOTO MODE / PLAYBACK MODE 31 USAGE PRECAUTIONS / NOTICES / CANADA COMPLIANCE 06 PLAYBACK MODE - VIDEO EDITING 32 FCC STATEMENT 07 PLAYBACK MODE - PROTECT & DELETE 33 FCC- SUPPLIER’S DECLARATION OF CONFORMITY 08 MYNEXTBASE CONNECT™ 34 P
Precautions Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
Product Warnings Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury. Distraction Warning This device is intended to enhance the situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. DO NOT seek to access the information stored on the device or change the device settings whilst driving.
Usage Precautions Notices Failure to heed the following precautions could result in personal injury or property damage, or negatively impact the device functionality. G Sensor Notice Battery Precaution - Do not immerse or expose the Dash Cam or batteries to rain, water or other liquids. - Do not leave the device exposed to a heat source or in a high-temperature location, such as in the sun or in an unattended vehicle.
FCC Statement FCC Identifier This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Identifier (FCC ID) is available as an E-label within your Dash Cam’s System Info pages.
FCC - Supplier’s Declaration of Conformity Statement SUPPLIER'S DECLARATION OF CONFORMITY (47 CFR Section 2.906). 5. FCC Marking We; Tank Design (The responsible party, who must be located in the United States) 6. Responsibilities and obligations Strictly follow the FCC rules of 2.906, 2.908, 2.909. Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below: 7.
Product Specification Model Number / Name NBDVR322GW Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 32mm / 2A Output: 5Vdc Hardwire Kit also available to purchase for a hidden, permanent power supply. Sensor Resolution 2.12M Pixel (1936 x 1097) Lens Type / Angle / Aperture 5G / 140° / F1.6 Recording Resolution 1920 x 1080 @60fps day & night Screen Size 2.
Package Contents Product Features Please check the contents of you Nextbase Dash Cam product. Thank you for purchasing this Nextbase™ Dash Cam product, in this section we will outline some of the features available with this dash cam. HD Recording Capability 1080p HD recording at 60 fps, to record the road ahead. Nextbase ™322GW Dash Cam Your Dash Cam to record the road ahead HD Touch Panel Display Bright, clear, high definition 2.5" screen with IPS technology for a wide viewing angle.
Camera Parts and Controls See below to identify the parts and controls of your Dash Cam 4 7 4 1 3 5 2 6 1 Dust Cover Mounting point located under the dust cover 2 Speaker Integrated speaker for audio playback 3 Camera Lens Wide angle 120º 4 Power Button Press and hold for 2 seconds to turn the Dash Cam On/Off 5 6 LEDs Top: Blue - The Blue LED will be on while the Dash Cam is charging. It will turn off when charging is complete, even if the Dash Cam is still plugged in.
Camera Parts and Controls (cont.) See below to identify the parts and controls of your Dash Cam 13 8 14 9 10 Reset 12 15 11 8 Dust Cover Mount point located under the dust cover 9 USB Cover USB port located under the dust cover 10 Light Sensor Automatically adjusts the screen brightness relative to the ambient light levels. 11 Reset Button Press to force the Dash Cam to restart.