User's Manual

ManualsBrandsPorta Phone ManualsElectronicsFull Duplex Wireless Communication System

Page 1

Full Deplex Communication System

user manual

Introduction

Thank you for your choice of ComStar Communication System.

PRO2000 is a DECT (Digital Enhanced Cordless Telecommunications) Full Deplex Communication System.

To the quality of audio and to the safety offered from the digital technology, PRO2000 offers manifold and

useful features including Full duplex system, multi-headset capabilities and multi-volume select. Please read this

instruction carefully before using your new ComStar for the first time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause

undesired operation.

A glance guide for the headset

A glance guide for the base unit

Installation

Please check your package that included the following items:

-Base Unit (PRO2000)

-Wireless Headset (ComStar S/SX/D/DX)

Vol up

Vol down

Talk/ Power on/off

Receiver

Mic

MicMute/CH

All Conference

Summary of content (4 pages)

PAGE 1
Full Deplex Communication System user manual Introduction Thank you for your choice of ComStar Communication System. PRO2000 is a DECT (Digital Enhanced Cordless Telecommunications) Full Deplex Communication System. To the quality of audio and to the safety offered from the digital technology, PRO2000 offers manifold and useful features including Full duplex system, multi-headset capabilities and multi-volume select. Please read this instruction carefully before using your new ComStar for the first time.
PAGE 2
-AC / DC adaptor for Base Unit - Base packing batterie - Headset packing batterie Choose a suitable site for the base unit, make sure it is not near to other electrical equipments. Connect the AC adaptor socket to the Base Unit and to your room’s power socket. Turn on the power of base. Power on/off 6.0v-7.5v battery pack AC Adapter socket Fitting the battery in the headset: 3.7v battery pack The pack rechargeable batteries come with your charger.
PAGE 3
-Press “Talk” key to get the headset, the “In use” LED is ON. During a talk conversation, you can adjust the talk volume (1 ~ 5 levels) by simply pressing • or ‚ key. End a call -Press “Talk” key, the “In use” LED is OFF. Mute -During a call conversation, you can mute your voice by pressing “Mute/CH” key, the headset will show mutetone that you can talk freely without be heard by the talk party, and you still be able to hear the talk party. -Deactivate the mute function, press “Mute/CH” again.
PAGE 4
-Press and hold SUB key again until the “SUB” LED is OFF -All headsets registered to this part are cleared Note: (1)SUB key A1orA2 to unsubscribe both A1 and A2. (2)SUB key A3orA4 to unsubscribe both A3 and A4. (3)SUB key B1orB2 to unsubscribe both B1 and B2. (4)SUB key B3orB4 to unsubscribe both B3 and B4. Conference talk When you are in a talk on the base, you can invite another channel headset to join your conversation. -Press the “All Conference” key on the base that you want to talk.