User's Manual

ManualsBrandsPorta Phone ManualsElectronicsDUPLEX WIRELESS SYSTEMS

Page 1

DUPLEX WIRELESS SYSTEMS

user manual

Introduction

Thank you for your choice of DUPLEX WIRELESS SYSTEMS.

This is a DECT (Digital Enhanced Cordless Telecommunications) duplex wireless system. To the quality of

audio and to the safety offered from the digital technology, The offers manifold and useful features including

Full duplex system, LED In use illumination,

multi-headset capabilities and multi-volume select. Please read this

instruction carefully before using your new system for the first time.

A glance guide for the headset

A glance guide for the base unit

Installation

Please check your package the following items(options):

-Base Unit

-Wireless Headset

battery pack

Mic

Power on/off

Vol down

Battery

Conference indicator

Connector for wire Headset 1

All Conference

Vol up

Receiver

Connector for wire Headset 2

Power switch/VOL

DC Jack 5V

Vol up

Vol down

Power on/off

EarJack

Receiver

ComStar Ultralite-R(ULR2015)

ComStar Ultralite-RD(ULRD2015)

ComStar Clip(CLIP2015)

ComStar HUB(HUB2015)

( ComStar HUB(HUB2015))

( ComStar Ultralite-R(ULR2015)/ComStar Ultralite-RD(ULRD2015)/ComStar Clip(CLIP2015))

Summary of content (5 pages)

PAGE 1
DUPLEX WIRELESS SYSTEMS user manual Introduction Thank you for your choice of DUPLEX WIRELESS SYSTEMS. This is a DECT (Digital Enhanced Cordless Telecommunications) duplex wireless system. To the quality of audio and to the safety offered from the digital technology, The offers manifold and useful features including Full duplex system, LED In use illumination, multi-headset capabilities and multi-volume select. Please read this instruction carefully before using your new system for the first time.
PAGE 2
-Wire Headset (Ultra 3G-S/ Ultra 3G-D) -AC/DC adaptor for Base Unit(5V/1A) - Packing batterie(800mAH/3.7V) Choose a suitable site for the base unit, make sure it is not near to other electrical equipments. Connect the AC adaptor socket to the Base Unit and the power socket. Turn on the power of base.
PAGE 3
Headset Power On / Off To power Off the headset - Press and hold “power on/off” key about 3 seconds, the headset will switch off which can prolong the use time of headset. To power On the headset -Press “power on/off” key The headset will power on with the “In use” LED light, the headset to search registered of base.
PAGE 4
This limited warranty only applies to the use of this device with a communications service for which it is designed. This device alone does not provide the customer with any communications service and requires a separate subscription to a communications service from a service provider. Altering service provider-specific settings may void the warranty.
PAGE 5
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.