User instruction WAP0800010LWCP
Introduction Congratulations on buying the 911 Wireless Charging Piston from Porsche Driver’s Selection Each 911 Wireless Charging Piston is unique. The installed original piston of the orsche 911 Turbo S is manufactured in the standard production process. Therefore, P certain manufacturing tolerances cannot be excluded and must be accepted. Complaints regarding the original part will not be recognised or accepted for this reason. Thank you for your understanding.
Safety information Read the operating instructions carefully before using the product. Please also observe the operating instructions and safety instructions for the device which you use with the product. The operating instructions are intended for any person who sets up, operates, cleans or disposes of the device. Intended use The 911 Turbo Wireless Charging Piston is designed for the wireless charging of smartphones with Qi charging technology. A power supply with at least DC 9V/1.
911 Turbo Wireless Charging Piston 3. To avoid magnetic failure or loss of card data, do not place cards with magnetic strips or chip cards [ID cards, bank cards, etc.] near or on the 911 Turbo Wireless Charging Piston. 4. Keep the wireless charger dry. If it has come into contact with liquids, disconnect it from the power supply, let it dry and clean the surface. 5. Do not apply force on controls, connections or cables. 6. The device may only be operated with the voltage specified on the nameplate. 7.
WARNING! Implanted medical devices Medical device manufacturers recommend a minimum distance of 16cm between radios and implanted medical devices such as pacemakers or implanted cardioverter-defibrillators to avoid possible interference with the medical device. Persons who rely on such devices should always maintain a minimum distance of 16cm between the medical device and the wireless charger. Turn off the wireless charger if there is any reason to believe that interference may occur.
911 Turbo Wireless Charging Piston Only use the wireless charger indoors. Do not operate the device near splashing water or in damp places. This device is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or without the necessary experience or knowledge, unless they are supervised by a person responsible for their safety or have received instructions from that person on how to use the device. There is a danger of injury.
Technical data Input [USB-C]: 5V/2A or 9V/1.67A or 12V/1.25A Power output: max. 15W Weight: approx. 812g Ambient temperature: +5°C to +35°C Storage temperature: −20°C to +60°C Size: 115 × 115 × 90mm Included in package 1× 911 Turbo Wireless Charging Piston, 1× USB-C to USB cable, 1× operating instructions Connect and power on Use a standard USB power supply [not included] with at least DC 5V/2A. You’ll get the best possible performance with a QC 2.0 or QC 3.0 power supply. 1.
911 Turbo Wireless Charging Piston Charging mat Power LED Charge port
Power off The 911 Turbo Wireless Charging Piston is permanently connected to the power supply and has no on/off switch. If no charging device is placed on the 911 Turbo Wireless Charging Piston and the power LED is not illuminated, the 911 Turbo Wireless Charging Piston is in standby mode. Disconnect the power supply from the mains socket or remove the USB-C cable to disconnect the 911 Turbo Wireless Charging Piston completely from the mains.
911 Turbo Wireless Charging Piston The charging process can be terminated at any time by removing the end device. If the end device signals that the charging process has ended, the LED on the 911 Turbo Wireless Charging Piston goes out. Note: it is normal for the smartphone and the 911 Turbo Wireless Charging Piston to heat up during operation. The 911 Turbo Wireless Charging Piston automatically stops the charging process when a critical temperature is reached.
Troubleshooting If you use a protective case for your phone, remove it before charging. Otherwise the charging process may be terminated prematurely or may not start. Ensure that there are no metallic foreign bodies on the charging pad of the 911 Turbo Wireless Charging Piston. If metallic foreign bodies are detected, the LED on the 911 Turbo Wireless Charging Piston will flash. In this case, the charging process will not start. Remove the foreign bodies and restart the charging process.
911 Turbo Wireless Charging Piston Make sure that the power supply used complies with the requirements specified in the “Connecting and operating” chapter. If the LED flashes after the smartphone has been placed on the charging pad, and there are definitely no metallic foreign bodies on the pad, it could be that the power supply does not comply with the requirements.
General information Power supply operation: disconnect the 911 Turbo Wireless Charging Piston from the power supply when not in use to keep power consumption to a minimum and thus reduce costs. Information about the CE symbol: electrical and electronic equipment placed on the market within the European Union must bear a CE symbol to indicate that the equipment meets the applicable requirements [e.g. on electromagnetic compatibility or device safety].
911 Turbo Wireless Charging Piston EU conformity declaration: the Porsche Design Group hereby declares that The 911 Turbo Wireless Charging Piston radio system complies with Directive 2014/53/EU. The full text of the EU conformity declaration is available at the following Internet address: www.porsche.com/911WirelessChargingPiston Service notes: this product is quality-tested and comes with the statutory warranty period of 24 months from date of purchase. Please keep the receipt as proof of purchase.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.