User's Manual

ManualsBrandsPolygroup ManualsElectronicsChristmas Tree Lighting

Page: 4 of 4

2.7 m / 9 ft EZ Connect™ Pre-lit Aspen Tree

ITM. / ART. 1455658

For assistance with assembly, parts and customer service, call: 1-888-919-0070 (English, Spanish, French),

10:00am-7:00pm, Monday-Friday, Eastern Time.

Congratulations on purchasing your new tree from

Polygroup®! This tree assembles with EZ Connect™ and Simple

Shape™ technology, allowing you to set up and light up your tree in less than 10 minutes! Carefully follow the instruc-

tions below on how to quickly and easily set up your new tree.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand on a level surface. (See Fig. A)

- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

- “Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.”

- “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Model no:. TG90P4826D09

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

TREE ASSEMBLY INSTRUCTIONS

FCC Verification User Manual

- The Canadian Government has announced an amendment of the radio act which will require computing equip-

ment to comply with EMI specifications in Canada. The effective date for products imported into Canada is January

31, 1989.

- The intent of the amendment is to establish Canadian Regulations which are harmonized with the existing FCC

Regulations. As such, no retesting is required and devices which have been tested and comply with the FCC Specifi-

cations (Class B) also comply with the Canadian Specification (Class B).

- There is however, an additional equipment label requirement. Units imported into Canada must be accompanied

by a label affixed to the device in both English and French.

“This Class B digital apparatus complies with Canadian ICES-003.”

“Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.”

Canadian Emissions Requirements

“This Class B digital apparatus complies with Canadian ICES-003.”

“Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.”

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, DO NOT RETURN YOUR TREE TO PLACE OF PURCHASE. please

Time, or visit our website at www.polygoup.com.

TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT

PARTS.

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Page: 1 of 4

Fig. A Tree Stand Assembly

Tree Stand Disassembly

1. Pull apart the legs of the stand so that

they are snapped into an x-shape, place the

tree stand on a level surface.

2. Then inserting the bottom section of the tree

into the assembled stand, insert and turn the

eyebolts into the stand and tighten until the

tree pole is firmly secured.

3. To close the stand, remove the eyebolts, press the metal button and

fold the legs together.

Click

Eye Bolt

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.38A Max.

Output: 29V 0.9A

Fig. B - Tree and Light Assembly

Section 1

Section 2

Section 3

Section 4

Section 5

Do Not Tamper

Internal Parts

Open the

protective

cap before

assembly

Do Not Tamper

Internal Parts

Open the

protective

cap before

assembly

Insert Green

Label Extension

Cord into Adaptor

Control box

Adaptor

To Be Plugged

Into Wall

Outlet

Foot Pedal

on/off Switch

Summary of content (2 pages)

PAGE 1
FCC Verification User Manual - This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - “Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 2
3. Each tree section is numbered with a tag. Please identify all sections before assembling. 4. Assemble the tree from the bottom to the top (See Fig. B). Start with the bottom section and remove protective cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. 5. Open the protective cap from the lower section(s) and continue inserting the upper section(s) until the tree top is inserted. 6. Allow branches to fall into place or gently pull up and out.