smart LED light strings Wrapped Dome Straight Lights INSTRUCTIONS GUIDE FOR INDOOR AND OUTDOOR USE
warning READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When used outdoors, this product must be connected to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
CAUTION 1. To reduce the risk of fire or electric shock: • Do not install on trees with needles, leaves or branches covering any metal materials; • Do not mount or support cords or cables in a manner that can cut or damage wire insulation; • Do not attempt to replace lamps or modify string; • Use only the adapter provided with this product, • This product does not contain lamp shunts. 2. Make sure connectors are fully inserted and secured. Twist all connector rings until hand tight. 3.
Technical Specifications Description Light LED Counts Color 50 100 150 RGB RGB RGB Wrapped Dome Straight Lights 250 400 600 RGB RGB RGB AC Adapter Rated Wattage of Light String (Amps) Total Wattage of Light String and Adapter Maxlmum Wattage Capacity of Adapter Maximum Light Strings can be Connected (Same model) USA / Canada Version Input：120 V~ / 60 Hz, 0.45 A Output：DC 24 V, 1.08 A 5.3 W (220 mA) 8.5 W 26 W (1.08 A) 3 EU / UK / Australia Version PRI：220-240 V~ / 50-60 Hz, Max: 0.
Description Light LED Counts Color 50 100 Wrapped Dome Straight Lights 150 250 400 RGBW RGBW RGBW RGBW RGBW AC Adapter Rated Wattage of Light String (Amps) Total Wattage of Light String and Adapter Maxlmum Wattage Capacity of Adapter Maximum Light Strings can be Connected (Same model) USA / Canada Version Input：120 V~ / 60 Hz, 0.45 A Output：DC 24 V, 1.08 A 4.4 W (185 mA) 7.4 W 26 W (1.08 A) 4 EU / UK / Australia Version PRI：220-240 V~ / 50-60 Hz, Max: 0.
single string setup 1. Adapter Controller Add-on Connector * Product outlook varies by models. Add-on Connector only available in specific models. 2. 1. Connect the Twinkly light string to the power adapter. 2. Plug the power adapter into a power socket and the lights will switch on.
multiple strings setup 1. 2. * Images for reference only 3. 4. Open the cap 1. Refer to the "Maximum Light Strings can be Connected" column in the Technical Specifications table to confirm if your light set model allows multiple strings setup. Do not attempt multiple light strings setup if N/A is marked. Make sure the total rated wattage of all connected products does not exceed the maximum wattage capacity of a single product. 2.
controller BUTTON • • • • • CONTINUOUS GREEN: Direct Wi-Fi mode, connected FLASHING GREEN: Direct Wi-Fi mode, no device connected CONTINUOUS BLUE: Home Wi-Fi network mode, connected FLASHING BLUE: Home Wi-Fi network mode, connection in progress FLASHING RED: Home Wi-Fi network mode, unable to connect LED INDICATOR • LIGHT BLUE: SETUP MODE (Bluetooth ON) • YELLOW: Firmware Update in progress • CONTINUOUS RED: General error • FLASHING WHITE: Reset procedure in progress 8
preset effects RAINBOW SNOW UPDOWN FIREWORKS Light arrangements vary by models Twinkly comes with 5 preset effects that may be used without downloading the app. Simply plug in the light string to a power outlet, then press the button on the controller to switch between the 5 preset effects.
app download & setup twinkly 1. 2. 3. Twinkly 4. Choose your controller Generation I Generation II 1. Go to App Store/Google Play Store (or scan QR code). 2. Download and install the Twinkly app. 3. Launch Twinkly app. 4. Select GENERATION II controller for your lights. Follow the setup process on the app. Note: All app illustrations in this document are a mere representation of the functionality and may vary from the actual app visuals.
connection modes 5 Bluetooth sec Bluetooth Connecting... A. HOME WI-FI NETWORK CONNECTION B. DIRECT Wi-Fi CONNECTION Twinkly uses Bluetooth for the setup process only. Wi-Fi connection is required for operation. You can use: A. Home Wi-Fi network connection (recommended): Connect with your home/office WiFi from the list of available networks. B. Direct Wi-Fi connection: Select “Twinkly_xxxxxx” WiFi from the list of available networks.
mapping Mapping complete MAPPING Map the layout of your decoration to unlock the full potential of your Twinkly lights like advanced effects, drawing and many upcoming features.
mapping tips Note: For best results, avoid reflective surfaces behind the tree, keep the mobile camera steady during the process and ensure a moderate ambient light (not too dark).
online manual Browse, play and edit effects Create new effects Group multiple devices together Download new effects 14 Gallery
choose preset effects 1. 2. All 3. 4. Favorites Snow Rainbow Snake Bright Twinkle Fireworks Candy Cane Sparkles Horizontal Flag Vertical Flag SNOW Galley EDIT EDIT APPLY APPLY 1. Open the Effects Gallery. 2. Select the desired effect to see the real-time preview on your Twinkly set-up. 3. Swipe left or right to browse effect. 4. Tap “Apply” to store the effect and play continuously. Note: App user interface may change due to technical updates and improvements.
troubleshooting Q • Q Check that the power adapter is plugged in and that the controller is correctly • connected to the device • • If this does not work, stop the Twinkly application and launch it again If this doesn’t work, unplug the power adapter, wait 30 seconds and plug in • If this does not work, try to Reset (see Reset procedure below) again • If this does not work, delete the Twinkly application from your smartphone, • • Within the Twinkly application, open “Devices” and check that the
reset twinkly 1. 2. RED 3. 1. Unplug Twinkly from the power socket. Press and hold the controller button. 2. While holding the button, plug in Twinkly. 3. Keep holding the button until all LEDs turn red, then release the button.
Polygroup® Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong To know more about your twinkly and its other cool features, please visit: www.polygroup.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISEDC Warning This device complies with Innovation, Science, and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
