User's Manual

60 mm
300 mm
65 mm
1 2 3 4 5
SPECIFICATIONS
H2O Beats Bluetooth Speaker
USER MANUAL
1. Product name: H2O Beats Bluetooth Speaker
2. Frequency Band: Bluetooth: 2402~2480MHz(TX/RX)
3. Functions: Wireless playing, hands-free
4. Battery: 1300 mAh
5. Bluetooth (BT) distance: 10 meters
6. Play time: 3 hours
7. Power: 6.45dBm(For CE)
1. (Power On / OFF)
Switch On – Press the key until the LED light is
flashing.
H2O Beats Bluetooth Speaker will enter pairing mode.
Switch Off – Press the key for 3 seconds.
2. (Previous / Volume -)
Press the key once to go back to the previous song.
Press and hold the key to gradually decrease the volume.
3. (Play / Pause)
Press the key once to play or pause the music.
Press and hold the key to disconnect the speaker with
the mobile device.
4. (Next / Volume +)
Press the key once to go to the next song.
Press and hold the key to gradually increase the volume.
5. (Hand Free)
Press the key once to answer or end the call.
Press and hold the key to decline the call.
Connect to Mobile Device
1. Pairing to mobile device
Follow the instructions below to pair the speaker with a
Bluetooth enabled mobile device.
a) The distance between the speaker and the mobile
device should be within 1 meter.
b) Press to turn on the speaker.
c) When LED light is flashing, the speaker has entered
pairing mode.
d) Activate the Bluetooth function on your mobile device.
Scan for the Bluetooth device.
e) Select “Summer Waves” from the search list.
f ) LED light will stay on after pairing is successful.
You can now play music and use the hands free
function on the speaker.
2. Disconnecting from mobile device
When you need to pair the speaker with another
mobile device, you have to disconnect the connection
from the current mobile device following the
instructions below:
a) On the mobile device which is currently connected to
the speaker, select “Summer Waves” in the Bluetooth
setting, then choose “Disconnect”, or Press and hold
the key on the speaker to disconnect the
connection with the mobile device.
b) Your mobile device will be disconnected from the
speaker.
c) The LED light of the speaker will flash when pairing
mode is ready again. You can then connect the
speaker with another mobile device following the
Pairing steps listed above.
3. Hands Free Calling
a) Answer a call – When there is an incoming call,
press the key on the speaker to pick up the call.
b) End a call – Press the key to end the call.
c ) Decline a call – Press and hold the key to decline a call.
4. Charging the speaker
a) “Low battery, please charge” sound will alert when
the speaker needs to be charged.
b) Connect the speaker to the power source with the
USB charging cable (included).
c) Red light will be constantly on while charging.
d) Red light will be off when the speaker is fully charged.
e) Unplug the speaker from the power source.
7
3
2
1
6
4
5
1. Power ON / OFF
2. Previous / Volume –
3. Play / Pause
4. Next / Volume +
5. Hands Free
6. USB port
7. LED light
Pictures
Function Keys Description