Owner's Manual

ASSEMBLY INSTRUCTIONS
MADE IN CHINA
1
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: AC 120V, 60Hz, 0.45A
Output: DC 29V, 0.9A
Fig. B - Assembling the tree
Section 1
Section 2
Section 3
Thank you for purchasing your Christmas tree from Balsam Hill®. The instructions below will help you
quickly and easily set up your new tree.
1. Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.
OWNER’S MANUAL
2. Each tree section is numbered with a tag. Please identify all sections before assembling.
3. Assemble the tree from bottom to the top. Start with the bottom section (section 1) and remove the
protective cap before inserting into the assembled stand. Make sure the pole is firmly inserted and
secured into the stand.
ITEM #: NOB-T-2373/1200LEDCC-PE/PVC-P-LV
26 Watts
6.5' BH NOBLE FIR TREE WITH EASY PLUG® AND LED COLOR+CLEAR® LIGHTS
Fig. A - Tree Stand Assembly
1. Pull apart the legs of the stand so
that they are x-shaped.
2. When inserting the bottom section
of the tree into the assembled stand,
thread the eyebolt into the stand
and tighten until the pole is firmly
secured.
Eye Bolt
Power indicator
Remote Control
OFF
C
O
L
O
R
+
C
L
E
A
R
C
L
E
A
R
C
O
L
O
R
Light Controller
C
O
L
O
R
+
C
L
E
A
R
C
L
E
A
R
C
O
L
O
R
Plug Adapter Into
Wall Outlet
Connect Plugs & Extension
Cord of the same color
Connect Plugs & Extension
Cord of the same color
Do Not Tamper
Internal Parts
Open the
protective
cap