User's Manual

ManualsBrandsPolycom ManualsElectronicsEagleEye Director II

www.polycom.com

service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries.

August 2014

Setting up the Polycom

EagleEye

Director

Ensure that all four metal pegs are inserted

into the peg sockets in the base.

Ensure that both metal pegs are inserted

into the peg sockets in the base.

hex key

1725-69178-001/C

DC IN 12V

3m*

* Connect the EagleEye Director to the codec using the supplied 3m cable or an

optional 10m cable. To extend the remote camera, order the appropriate length cable.

1465-09241-001

DC IN 12V

1465-52748-040

Optional and ordered separately

Summary of content (11 pages)

PAGE 1
Setting up the Polycom® EagleEyeTM Director DC IN 12V 1 1465-09241-001 3m* * Connect the EagleEye Director to the codec using the supplied 3m cable or an optional 10m cable. To extend the remote camera, order the appropriate length cable. Optional and ordered separately DC IN 12V 1465-52748-040 2 3 hex key 90 O 4 Ensure that all four metal pegs are inserted into the peg sockets in the base. Ensure that both metal pegs are inserted into the peg sockets in the base. www.polycom.
PAGE 2
5 DC IN 12V Optional 6 Polycom RealPresence® Group 300/500 3m DC IN 12V 1 2 12V 6.
PAGE 3
Polycom RealPresence Group 700 3m DC IN 12V 1 2 3 4 1 2 3 100-240VAC 50/60Hz 2.
PAGE 4
Polycom HDX 7000 or 8000 Series 3m DC IN 12V 4 4 AUX 3 VCR/DVD 3 VCR/DVD Polycom HDX 9000 Series DC IN 12V 3m Y 1 Y C 2 Y C 3 VCR/DVD 4 C 2 IOIOIO 1 2 3 Y C VCR/DVD 4 5 100-240VAC 50/60Hz 4A 1 1 3 VCR/DVD 4 1 3 VCR/DVD IR LAN Polycom HDX 9001, 9002, and 9004 Setting up the Polycom EagleEye Director Polycom HDX 9006 4
PAGE 5
7 +9º >12 in. (0.3 m) m) ≥12 in. (0.3 m) <2 2 m) ≥12 in. (0.3 m) 6.7 5.5 - 7 ft. (1.7 - 2.1 m) ft. ( t. ( 6.7 2f <2 ≥12 in. (0.3 m) -30º <75º 3 ft. (0.9 m) < _ 50 ft.
PAGE 6
8 Setting up the Polycom EagleEye Director 6
PAGE 7
9 English HDX version 3.0.1 or later: • From the local interface, go to System > Admin Settings > Cameras > Camera Settings. Select Detect Camera. • From the local interface, go to System > Admin Settings > Cameras > Camera Calibration. Follow the calibration directions on the screen. RealPresence Group Series version 4.0 or later: • From the local interface, go to Administration > Camera Tracking > Calibration. Follow the calibration directions on the screen.
PAGE 8
Français Version HDX 3.0.1 ou une version ultérieure: • Dans l'interface locale, sélectionnez Système > Paramètres administrateur > Caméras > Réglages des caméras. Sélectionnez Détecter la caméra. • Dans l'interface locale, sélectionnez Système > Paramètres administrateur > Caméras > Calibrage des caméras. Suivez les instructions de calibrage qui s’affichent à l’écran. RealPresence Group Series version 4.
PAGE 9
Polski Wersja HDX 3.0.1 lub nowsze: • W interfejsie lokalnym wybierz kolejno opcje System > Ustawienia administratora > Kamery > Ustawienia kamery. Wybierz opcję Wykryj kamerę. • W interfejsie lokalnym wybierz kolejno opcje System > Ustawienia administratora > Kamery > Kalibracja kamery. Postępuj zgodnie z instrukcjami kalibracji wyświetlanymi na ekranie. Wersja RealPresence Group Series 4.0 lub nowsze: • W interfejsie lokalnym wybierz kolejno opcje Administracja > Śledzenie kamery > Kalibracja.
PAGE 10
한국어 HDX 버전 3.0.1 이상 : • 로컬 인터페이스에서 시스템 > 관리자 설정 > 카메라 > 카메라 설정으로 이동합니다 . 카메라 검색을 선택합니다 . • 로컬 인터페이스에서 시스템 > 관리자 설정 > 카메라 > 카메라 교정으로 이동합니다 . 화면의 교정 지시를 따르십시오 . RealPresence Group 시리즈 버전 4.0 이상 : • 로컬 인터페이스에서 관리 > 카메라 추적 > 보정으로 이동합니다 . 화면의 교정 지시를 따르십시오 . 자세한 내용은 관리자 가이드 및 support.polycom.com 에서 제공하는 귀하의 제품에 대한 사용 설명서를 참조하 십시오 . 日本語 HDX のバージョン 3.0.
PAGE 11
繁體中文 HDX 版本 3.0.1 或更高版本： • 在本地介面上前往「系統」 > 「管理設定」 > 「攝影機」 > 「攝影機的設定」。選取「偵測攝影機」。 • 在本地介面上前往「系統」 > 「管理設定」 > 「攝影機」 > 「攝影機校正」。按照畫面上的校正指示進行。 RealPresence Group 系列 4.0 或更高版本： • 在本地介面上前往「管理設定」> 「攝影機追蹤功能校正」。按照畫面上的校正指示進行。詳情請參閱《管理員指南》和《使用者指南》，下載網址是：support.polycom.