Polycom® SoundStructure® System Product Accessory Guide
Polycom® SoundStructure® Series Product Accessory Guide Below are accessories that can be used with SoundStructure installed audio solutions. For more information on how to use these options, please refer to the SoundStructure documentation.
Product/Part Number Product Compatibility Description Polycom HDX Mica Microphone Array Can be used with any SoundStructure product HDX Table Microphone Array, three microphone elements pick up audio in a 360-degree pattern around the mic, w/15ft cable. Walta connector requires a conversion dongle to connect to SoundStructure device. Use Walta Female to RJ-45 Male Cable with HDX Microphone Cable, or use CLink2 CrossOver Cable with Walta Male to RJ-45 Female Cable.
Polycom® SoundStructure® Series Product Accessory Guide Product/Part Number Product Compatibility Description Walta Female to RJ45 Male Cable (12in) Can be used with any SoundStructure product 2457-23716-001 Conference Link2 cable (18in) 2457-23574-001 Conference Link2 cable Walta Female to RJ45 Male Adapter Cable, 12in. For connecting HDX Table Microphone Array to any SoundStructure product, use with Polycom HDX Microphone Cable 15ft (2457-23215-001) or 25ft (2457-23216-001).
Product/Part Number Product Compatibility Description Reinforced Rack ears Can be used with any SoundStructure product Reinforced rack ears for mounting SoundStructure in rack. Includes chassis screws. Included with SoundStructure product. Can be used with any SoundStructure product Single line PSTN interface for SoundStructure devices. Can be used with any SoundStructure product Dual line PSTN interface for SoundStructure devices.
Product/Part Number Product Compatibility Description Polycom HDX IR Remote Control 2201-52556-001 Can be used with any SoundStructure product equipped with external IR receiver HDX remote control for use with HDX Series codecs, English version. Requires an external IR receiver (such as the Dinky Link from Xantech) connected to the SoundStructure rear panel IR receiver port. SoundStructure Logic Connector Can be used with any SoundStructure product Single DB25 connector.