Voyager 8200 UC User Guide
Contents Headset overview Be safe 3 3 Connect and pair 4 Connect to PC 4 Configure for media 4 Pair to mobile device 4 Pair mode 5 USB Bluetooth adapter 5 Pair USB adapter again 5 NFC pairing 5 Load software 6 The Basics 7 Power on/off 7 Fit 7 Volume 7 Make/Take/End Calls 7 Mute/unmute 8 Play/pause music 8 Track selection 8 Voice control 8 Charge 8 More Features 10 Select language 10 Use sensors 10 ANC 11 OpenMic 11 Change headset settings 11 Caller Announcement (mobile phone only) 11 Update firmware
Headset overview L R voice 00:02 ANC 2 1 OpenMic Volume dial Voice control: Siri, Google Now™, Cortana Play previous track* Play/pause* Skip to next track* ANC OpenMic Active Noise Cancelling Hear surroundings Mute Headphone LEDs Call button: Answer/end/decline call Power Bluetooth® pairing NOTE *Functionality varies by application. May not function with web-based apps.
Connect and pair Connect to PC Your Bluetooth USB adapter comes pre-paired to your headset. 1 Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. 2 The USB adapter LED flashes blue and then turns solid blue to indicate the headset is connected to the USB adapter. If you are wearing your headset you will hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter will flash blue.
Pair mode Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue. USB Bluetooth adapter USB LEDs Red and blue flashes Solid Blue Blue flashes Solid red Purple flashes Pair USB adapter again 1 What they mean Pairing Pairing successful; Connected On a call Mute active Streaming music/media from computer Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2 Put your headphones in pair mode.
Load software NOTE Some softphones require the installation of Plantronics Hub for Windows and Mac to enable headset control (answer/end and mute) functionality. • Download Plantronics Hub for Windows/Mac by visiting plantronics.com/software. • Download Plantronics Hub for iOS/Android by visiting plantronics.com/software, the App Store or Google Play.
The Basics L R voice 00:02 ANC Power on/off Fit 2 1 OpenMic Slide the switch to power on or off. IMPORTANT Headset microphones are on the front of your earcups. For best call audio, ensure that left and right earcups are on the correct ear. R L Volume Rotate the volume wheel forward (+) or backward (–) to control the volume. Adjust headset microphone volume (softphone) Place a test softphone call and adjust softphone volume and PC sound volume accordingly.
• Put on the headset to answer call IMPORTANT For best call audio, ensure that left and right earcups are on the correct ear. Answer a second call First, tap the Call button to end current call, then tap the Call button again to answer new call. End a call Tap the Call button to end current call. Hold a call Double-tap the Call button to put a call on hold. Tap the Call button again to answer an incoming call. NOTE Up to 2 calls can be put on hold.
TIP To check the headphones battery status, tap the Call button while wearing your headphones. Headphones must be in idle state. Your headphones have up to 24 hours of listening time.
More Features Select language You can wirelessly change your headset language using Plantronics Hub software. Download: plantronics.com/software. Choose: • With your headset paired to your smartphone, select headset language in Plantronics Hub for iOS/ Android • With your headset connected to your computer via USB adapter or cable, select headset language in Plantronics Hub for Windows/Mac* *USB adapter not included in all models. Voice alerts list Following is a list of common voice alerts.
ANC Active Noise Cancelling (ANC) reduces external noise and enhances your music and sound quality. Slide the ANC switch to choose: • Mid: recommended for office • High: recommended for airplane OpenMic Change headset settings When not on a call, tap the red button to hear your surroundings (your music/audio will pause). You can manage your headset settings by using Plantronics Hub for Windows/Mac on your computer or Plantronics Hub for iOS/Android on your mobile device. Visit plantronics.
Update firmware Keep your firmware up-to-date to improve performance and add new features to your headset. Update your firmware using your computer or mobile device with Plantronics Hub for Windows/Mac or Plantronics Hub for iOS/Android, respectively. Download Plantronics Hub at plantronics.com/software.
Troubleshooting During a call, my voice sounds muffled or far away to other callers. You may be wearing your headset backwards. Headset microphones are on the front of your earcups. For best call audio, ensure that left and right earcups are on the correct ear. When I use my headset with a softphone, the Check the following: headset call control and mute buttons don't • Make sure the softphone you are using is supported by work. viewing our software compatibility guide.
2 Open Plantronics Hub for Mac and configure desired settings. 3 Quit Plantronics Hub. On my Mac, I can't update headset firmware Skype for Business and Lync users only: with Plantronics Hub 1 Quit Skype for Business or Lync softphone. 2 Open Plantronics Hub for Mac and update headset firmware. See Update firmware. 3 Quit Plantronics Hub. On my Mac, if I'm listening to streaming audio and take off the headset, iTunes starts playing when I put the headset back on. This is a known issue.
Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Scorpius 171 Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2017 Plantronics, Inc. Plantronics and Voyager are trademarks of Plantronics, Inc. registered in the US and other countries, and OpenMic and PLT are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license.