Backbeat Go 2 ® User Guide
Contents Welcome 3 4 What's in the box 5 Headset overview Pair 6 Pair first time 6 Pair another device 6 Multi-connectivity 6 Charge 7 Check battery level Fit 7 8 The Basics 9 Power the earbuds on or off Audio 9 Adjust the volume 9 Mute 9 Make/Take/End Calls 9 More Features 10 Deepsleep Mode 10 Stay connected 10 Voice alerts 10 Restore factory settings Specifications 9 10 11 2
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Backbeat Go 2 earbuds. Please refer to the safety instructions in the quick start guide for important product safety information prior to installation or use of the product.
What's in the box Earbuds (medium eartips installed) with microphone AC charger Eartips (small and large) 4
Headset overview Charge port Headset indicator light (LED) Volume up button: Increases volume, skips to next track Audio/call button: Powers on/off earbuds, answers/ends/declines call, plays/pauses music Volume down button: Decreases volume, plays previous track / Mute/Unmute 5
Pair Pair first time The first time you power on your earbuds, it begins the pairing process. 1 Power on the earbuds. The indicator light, located on the right earbud, flashes red and blue to indicate pairing mode. • iPhone and Android™ Smartphones Follow the voice-guided pairing instructions. • Other phones Use your phone's menu to: 2 Activate Bluetooth® on your phone and set it to search for new devices.
Charge Your new earbuds have enough power to pair and make a few calls. To access the charging port, insert your fingernail into the groove on top of the right earbud and pull down. It takes up to 2.5 hours to fully charge the earbuds. While charging, the indicator light is red and turns blue once charging is complete. Check battery level You can check the battery level by tapping either of the Volume buttons. Your earbuds announce battery status and the indicator light flashes to show the charge level.
Fit Selecting the right size eartip is essential for you to fully appreciate the premium audio quality the earbuds offer. 1 Acoustic seal Out of the box, the medium eartips are installed on the earbuds. We recommend that you try each eartip (small, medium and large), perform a sound check and choose the eartip that gives the best sound experience. A snug fit will ensure a rich bass response. 2 Comfort and stability The stabilizers can be rotated to three pre-set positions.
The Basics Power the earbuds on or off Audio Press the Audio/call button / until you hear “power on." To power off, press the Audio/call button / for 4 seconds until you hear "power off." Play or pause audio Tap the Audio/call button / . Skip to next track Press the Volume up (+) button for more than 1 second. Play previous track Press the Volume down (–) button for more than 1 second to restart the current track. Press the button twice (each press more than 1 second) to go to the previous track.
More Features Deepsleep Mode If you leave your headset powered on but out of range of your paired phone for more than 20 minutes, your headset will conserve its battery power by entering into a DeepSleep™ mode. Once back in range with your phone, press any button to exit DeepSleep mode. If your phone is also ringing, tap the Call button again to answer your call.
Specifications Talk/Listening time Up to 4.
NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2013 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. US Patents Pending 200674-06 (07.