User Guide

1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel [phone] • Fax [phone] • www.polyplanar.com
7.17”
Overall Diameter
5.20”
Cutout Diameter
1/8”
Hole Diameter
MA4056 Round Speaker Installation Guide
Cutout and use as template for drilling
Installation: Find a suitable location
making sure there is clearance for
the installed depth. Use a hole saw
or other suitable device to make a
cutout.
Place the speaker in the cutout and
mark and drill holes for the mounting
screws (supplied). If the panel is too
thin or soft for screws use a stainless
screw clips.
Attach speaker wires supplied,
solid color wire to positive (red mark
or with + sign or larger tab as shown
on the diagram).
Scale= 1:1
Reproduction may change
accuracy
Mounting Depth
2.56”