MO-IDL2 DUAL LAVALIER MICROPHONE WITH DSLR/SMARTPHONE SWITCH PRODUCT MANUAL
THANK YOU FOR CHOOSING POLSEN. The MO-IDL2 dual lavalier microphone delivers detailed and accurate sound for interviews, podcasts, and YouTube videos, whether you’re shooting with a smartphone, DSLR, or camcorder. It offers much better audio than built-in microphones and enhances the production value of any video presentation. The compatibility of the microphone can be changed with the flip of a switch and eliminates the need for a separate microphone when you change recording devices.
PRECAUTIONS • Please read and follow these instructions, and keep this manual in a safe place. • Keep this product away from water and all flammable gases or liquids. • Do not attempt to disassemble or repair this product. • Make sure that this product is intact and that there are no missing parts. • All images are for illustrative purposes only. OVERVIEW 1. Foam windscreen 2. Omnidirectional mic capsule 3. Tie clip 4. Battery compartment 5. Function switch Also included: • LR44 battery • 1/4 in.
INSTRUCTIONS Installing the Battery 1. Unscrew the function switch to expose the battery compartment. 2. Make sure to align the + side of the battery with the + side of the battery compartment, and then insert the battery into the compartment. 3. Screw the function switch back together. Note: To preserve battery life, move the switch to the Phone/Off position when the MO-IDL2 is not in use. Recording 1.
4. You are now ready to record. Check the instructions of your video or audio recording app for more details on recording. RECORDING TIPS • For the best recording quality, the MO-IDL2 microphone should be approximately 6 to 8 inches from the sound source. • Always use the foam windscreen to diminish vocal plosives (e.g., the “pop” from p and b sounds) and wind noise.
SPECIFICATIONS Transducer Type Electret condenser Pattern Omnidirectional Frequency Response 20 Hz to 20 kHz Sensitivity -30 dB ±3 dB (0 dB=1 V/Pa, 1 kHz) Output Impedance ≤1000 Ω Signal-to-Noise Ratio 74 dB Connector 1/8 in. (3.5 mm) 4-pin mini plug Power Requirement LR44 button-cell battery Cable Fixed 19.7 ft. (6 m) Weight 2.5 oz. (70 g) Capsule Dimensions Length: 0.7 in. (18 mm) Diameter: 0.4 in. (9.
Relative Response in dB FREQUENCY RESPONSE 10 0 -10 -20 -30 -40 20 Hz 100 1K Frequency in Hertz POLAR PATTERN 330° 0° 30° 60° 300° 90° 270° 120° 240° 210° 180° 150° 10K 20K
ONE-YEAR LIMITED WARRANTY This Polsen product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.