MO-IDL1-MK2 LAVALIER MICROPHONE WITH DSLR/SMARTPHONE SWITCH PRODUCT MANUAL
THANK YOU FOR CHOOSING POLSEN. The MO-IDL1-MK2 lavalier microphone delivers detailed and accurate sound for interviews, podcasts, and YouTube videos, whether you’re shooting them with a smartphone, DSLR, or camcorder. It offers much better audio than built-in microphones and enhances the production value of any video presentation. The compatibility of the microphone can be changed with the flip of a switch and eliminates the need for separate microphones when you change recording devices.
THANK YOU FOR CHOOSING POLSEN. The MO-IDL1-MK2 lavalier microphone delivers detailed and accurate sound for interviews, podcasts, and YouTube videos, whether you’re shooting them with a smartphone, DSLR, or camcorder. It offers much better audio than built-in microphones and enhances the production value of any video presentation. The compatibility of the microphone can be changed with the flip of a switch and eliminates the need for separate microphones when you change recording devices.
PRECAUTIONS • Please read and follow these instructions, and keep this manual in a safe place. • Keep this product away from water and all flammable gases or liquids. • Do not attempt to disassemble or repair this product. • Make sure that this product is intact and that there are no missing parts. • All images are for illustrative purposes only. OVERVIEW 1. Foam windscreen 2. Omnidirectional mic capsule 3. Tie clip 4. Battery compartment 5. Function switch Also included: • LR44 battery • 1/4 in.
INSTRUCTIONS Installing the Battery 1. Unscrew the function switch to expose the battery compartment. 2. Make sure to align the + side of the battery with the + side of the battery compartment, and then insert the battery into the compartment. 3. Screw the function switch back together. Note: To preserve the life of the battery, move the switch to the Phone/Off position when the MO-IDL1 is not in use. Recording 1.
4. You are now ready to record. Consult the instructions of your video or audio recording app for directions on recording. Important: When playing back a recording on a smartphone, unplug the MO-IDL1-MK2 from the input jack. Listen to the playback with headphones or the internal speaker. RECORDING TIPS • For the best sound quality, the MO-IDL1-MK2 microphone should be approximately 6 to 8 inches from the sound source.
SPECIFICATIONS Transducer Type Electret condenser Pattern Omnidirectional Frequency Response 20 Hz to 20 kHz Sensitivity -30 dB ±3 dB (0 dB=1 V/Pa, 1 kHz) Output Impedance ≤1000 Ω Signal-to-Noise Ratio 70 dB Connector 1/8 in. (3.5 mm) 4-pin mini plug Power Requirement LR44 button-cell battery Cable Fixed 19.7 ft. (6 m) Weight 2.1 oz. (59.5 g) Capsule Diameter Length: 0.8 in. (21 mm) Diameter: 0.3 in.
Relative Response in dB FREQUENCY RESPONSE 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 20 Hz 100 500 1K Frequency in Hertz POLAR PATTERN 330° 0° 30° 60° 300° 90° 270° 120° 240° 210° 180° 150° 5K 10K 20K
ONE-YEAR LIMITED WARRANTY This Polsen product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
