Glideforce High-Speed LD Linear Actuator w/ Feedback - Datasheet
Concentric International
1901 Bell Ave., Suite 18, Des Moines, IA 50315
www.concentricintl.com
Rev. 20210318
Page 1 of 6
LINEAR ACTUATOR
GF23 SERIES
Product Data Sheet
Standard Features:
Compact design
All aluminum frame and extension tube
Nominal stroke lengths: 2” [50mm], 4” [100mm], 6” [150mm], 8” [200mm],
10” [250mm], 12” [300mm]
Input voltage: 12VDC
Standard gear ratio: 20:1 [other ratios available]
Dynamic load range: 27 lbs. [120 Newtons] –to- 180 lbs. [800 Newtons]
Maximum static load: 562 lbs. [2,500 Newtons]
Maximum current draw: 3.5 Amps @ 12 VDC
Speed at no load: 0.55 in/sec [14 mm/sec] –to- 3.3 in/sec [84 mm/sec]
Speed at full load: 0.49 in/sec [12 mm/sec] –to- 2.9 in/sec [75 mm/sec]
Standard preset limit switches at both ends of stroke
All metal drive gears
Noise level: ≤70dB (no load)
Mounting hole diameter (both ends): 1/4” [6.4mm]
Duty cycle: 25% or 1 min continuous operation in 4 min.
Working temperature: -13F [-25C] to +149F [+65C]
IP rating: IP65 (IP69K – special order)
Accessories:
Mounting brackets
Direction reversing switches
Wired and wireless controllers
Direction reversing relays