High Performance Wireless Amplifier. Your old speaker’s new best friend. 1. www.polkaudio.
High Performance Wireless Amplifier. Your old speaker’s new best friend. Contents What’s in the Box ...................................................................... 3 Getting Started ......................................................................... 3 Connecting Your A1 .................................................................. 4 Playing Music ........................................................................... 5 Specifications ...................................................
What’s In The Box For The Best DTS Play-Fi Experience To ensure your system is operating under the best environment possible, here are a few additional tips: • Polk A1 amp • Power cable • User Guide • F or the fastest streaming performance, especially when connecting to multiple speakers simultaneously, an 802.11n router or better is recommended. • E nsure the DTS Play-Fi device is within wireless reach of your router, or that the signal is not hindered by concrete, brick, or other dense walls.
Hooking Up Speakers to Your A1 Amplifier 3. T he white light on the back will blink quickly for about 20 seconds, after which it will begin to pulse slowly. 4. The slowly pulsing light means your device is ready to connect to your Wi-Fi network. Note: if the Wi-Fi LED is not pulsing slowly, Press and hold the Wi-Fi setup button (for 8 seconds), until you hear the second tone. 5. D ownload the Polk Omni App from the Apple App Store or Google Play Store. 6. Launch the app and follow the instructions.
Where to locate your A1 Amplifier Android device instructions 1. Launch the Polk Omni app. Your Omni A1 Amplifier will be wired into a stereo pair of component loudspeakers. The proximity of your network router to your audio system is what matters, and that will be subject to the performance capabilities of your router. 2. The app will automatically find your device and prompt you to set it up. Tap the “Set up” button. 3. If your Wi-Fi network is protected, enter the password.
Primary vs. Secondary Speakers Once inside the Polk Omni app, you will notice that when sending music to your devices, they are grouped into primary and secondary zones. The DTS Play-Fi software requires that a primary speaker be selected to create a new listening session or zone. This is designed to maximize synchronization down to one millisecond thereby eliminating any sound echo that can be found from other ecosystems.
1 Viper Way Vista, CA 92081 800-638-7276 www.polkaudio.com email: polkcs@polkaudio.com twitter: @polkaudio Google Play is a trademark of Google Inc. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
