LSi 9 Bookshelf Loudspeaker Enceinte d’étagère LSi15 Floorstanding Loudspeaker Enceinte colonne Owner’s Manual LSi SERIES LSi 7 Bookshelf Loudspeaker Enceinte d’étagère
LSi SERIES FROM POLK AUDIO The LSi Series from Polk Audio is the ultimate expression of the performance principles that have made Polk Audio a world leader in loudspeaker technology. The LSi Series features patented Polk Audio technologies reengineered for the new millennium. From reformulated Dynamic Balance cones, to ring radiator tweeters, the LSi Series is for serious listening.
Product Disposal - Certain international, national and/or local laws and/or regulations may apply regarding the disposal of this product. For further detailed information, please contact the retailer where you purchased this product or the Polk Audio Importer/Distributor in your country. A listing of Polk Audio Importer/Distributors can be found on the Polk Audio website www.polkaudio.com or by contacting Polk Audio at 5601 Metro Drive, Baltimore, Maryland 21215, USA— Phone: +1 410 358-3600.
Your LSi Series Loudspeakers are magnetically shielded for safe placement near your TV or video monitor. If you notice video distortion or discoloration, immediately move the speakers away from the TV and call Polk Audio Customer Service Monday – Friday, 9:00 AM – 6:00 PM Eastern Time, (800) 377-7655 (USA and Canada) or email polkcs@polkaudio.com. CONNECTION OPTIONS FOR LSi SERIES LOUDSPEAKERS [FIGURE 6] Follow the hookup directions included with your receiver. Strip 1/2 inch (12.
FIGURE 6 FIGURE 6 Basic hookup diagram for LSi Loudspeakers. Diagrama básico de conexión. Diagramme de branchement rudimentaire. Grundlegendes Anschlussdiagramm. FIGURE 7 FIGURE 7 Using binding post connections. Uso de conexiones con tornillos de presión. Utilisation des bornes de branchement. Verwendung von Anschlussklemmen.
Bi-amping [figure 9] allows you to use separate amplifiers for the high and low frequency sections of your loudspeaker for greater dynamic range and lower distortion. After removing the jumpers, connect the speaker wires from the high frequency amplifier outputs to the upper set of terminal posts on each speaker. Follow the same procedure for connecting the low frequency amplifier outputs to the lower set of terminals. Remember to maintain correct wiring polarity (+ to +, - to -) in all connections.
FIGURE 10 FIGURE 10 (LSi7 ONLY) Use template to mark mounting location. Use la plantilla para marcar la ubicación de montaje. Utilisez le gabarit pour marquer le lieu de fixation. Verwenden Sie die Schablone zur Markierung der Befestigungsstelle. FIGURE 11 [a] FIGURE 11a & 11b (LSi7 ONLY) Use #10 screw for wall stud, use #10 (M4.5) wall anchors + screw for no wall stud. Use un tornillo n° 10 si hay parales internos en la pared, use anclas de pared n° 10 y un tornillo si no hay.
LIMITED FIVE YEAR WARRANTY LIMITED FIVE YEAR WARRANTY Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. La garantie de Polk Audio, Inc., n’est valide que pour l’acheteur au détail original.