ENGLISH Getting Started Please inspect your loudspeakers carefully. Notify your Polk Audio dealer if you notice any damage or missing items. Keep the carton and packing material; this will do the best job of protecting your loudspeakers if they must be transported. Safe Limits of Operation Damage to loudspeakers can occur when an amplifier, regardless of its wattage, is made to play at higher listening levels than it can produce at low distortion levels.
FRANCAIS Guide de demarrage Inspectez vos haut-parleurs avec soin. Si vous constatez des dommages ou s'il manque des pieces, contactez votre revendeur Polk Audio. Conservez la boite et I'emballage-ils assureront la meilleure protection de vos haut-parleurs en cas de transit eventuel. Limites d'operation Un haut-parleur peut etre endommage lorsqu'un amplificateur, quelle que soit sa puissance, est pousse au dela de ses limites (typiquement a la position 12h ou 13h du controle de volumel.
PORTUGUES Primeiros passos Inspecione cuidadosamente cada alto-falante. Notifique a revendedor da Polk Audio caso note algum dana au caso estiver faltando algum componente. Guarde a caixa e a material de embalagem, pais sao mais adequados para proteger as alto-falantes caso precisem ser transportados.
Figure 1 BASIC COAXIAL CONNECTION Figura 1 CONEXION COAXIAL BAslCA Figure 1 CONNEXION D'UN HAUTPARLEUR COAXIAL Abbildung 1 EINFACHE KOAXIALVERBINDUNG Figura 1 CONEXAO COAXIAL BAslCA Figura 1 CONNESSIONE COASSIALE 01 BASE Coaxial speaker Amplifier Figure 2 BASS BLOCKER db351 WIRING CONNECTION Figura 2 BLOQUEADOR DE BAJOS CONEXION DE CABLEADO DEL db351 Figure 2 "BASS BLOCKER" (bloqueur de graves) CONNEXION: db351 Abbildung2 BASS-BLOCKIEREINHEIT db351-VERKABELUNGSANSCHLUSS Amplifier ! Figura 2 BLOQUEADOR
Figure 4 INSTALLING db351 . ROUND MODEL Figura 4 INSTALACION DEL MODELO REDONDO db351 Figure 4 INSTALLATION: db351 MODELE ROND Abbildung 4 INSTALLATION VON db691 OVALES MODELL Figura 4 INSTALACAO DO db351 MODELO REDONDO Figura 4 INSTALlAZlONE DEL db351 MODElLO CIRCOLARE o Figure 5 INSTALLING db401, db501, db521 , db651. db651s, db5251, db6501 ROUND MODELS Figura 5 INSTALACION DE LOS MODELOS REDONDOS db401 , db501, db521. db651, db651 s, db5251 Ydb6501 Figure 5 INSlALLAliON: db401, db501, db521. db651.
Figure 7 INSTALLING db691 OVAL MODEL WITH GRILLE Figura 7 INSTALACION DEL MODELO OVALADO db691 CON REJILLA Figure 7 ·INSTALLATION: db691 MODELE OVALE avec grille Abbildung 7 INSTALLATION VON db691 OVALES MODELL mit Grill Figura 7 INSTALACAO DO db691 MODELO OVAL com grade Figura 7 INSTALWIONE DEL db691 MODELLO OVALE con griglia Remove bottom mount spacer ring before installing grille. Quite el anillo espaciador de la montura de abajo antes de instalar la rejilla.
Figure 9 INSTALLING db651s, db651& db6501 WITH GASKET AND GRILLE Figura 9 INSTALACIDN DE LOS MODELOS db651s, db651 Ydb6501 CON JUNTA YREJILLA Figure 9 INSTALLATION: db651s, db651 , db6501 avec JOINT D'ETANCHEITE et GRILLE Abbildung 9 INSTALLATION VON db651s, db651 & db6501 MIT DICHTUNG und Grill Figura 9 INSTALACAO DO db651s, db651e db6501 COM GAXETA e grade Figura 9 INSTALLAZIONE DEL db651s, db651 e db6501 CON GUARNIZIONE e griglia Figure 10 INSTALLING db6501/db651 WITH GRILLE Some applications may requir
Figure 11 CROSSOVER MOUNTING Allow for ventilation clearance. Figura 11 MONTAJE DE CROSSOVER Deje espacio para la ventilaci6n Figure 11 MONTAGE DU SEPARATEUR Assurez un degagement suffisant pour la ventilation. Abbildung 11 CROSSOVER-INSTALLATION lassen Sie Freiraum wr lOftung. Figura 11 MONTAGEM DO CROSSOVER Deixar espa90 para ventila9ao. Figura 11 FISSAGGIO DEL CROSSOVER Lasciare spaz io sufficiente per la circolazione dell'aria. ,c:. .:. .:. .:. .:. .:. .:. v [] ......
ENGLISH D86501 & D85251 Figure 14 Flush Mount TWEETER MOUNTING 1. Check for proper clearance: The flush mount kit is 7/8" (22.2mml deep. 2. Mark the center of the spot and cut a 2" (50.8mml diameter hole using a hole saw, drill bit or razor knife. 3. Assemble the cup, clamp and machine screw loosely as shown. 4. Route wires through the round opening in the bottom of the cup. 5. Press the assembly into the 2" (50.8mm) diameter hole until the clamp edge is below the mounting surface, then tighten the screw.
DEUTSCH Abbildung 14 Biindige Montage HOCHTONER-MONTAGE 1. PrOfen Sie, ob genug Freiraum da ist: Der Kit zurbOndigen Montage ist 22,2 mm tief. 2. Markieren Sie den Mittelpunkt und schneiden Sie mit einer Lochsage, einem Bohrer oder einem Teppichmesser ein Loch mit 50,8 mm Durchmesser. 3.
ENGLISH 086501 & 085251 Figure 15 Surface Mount TWEETER MOUNTING 1. Using the base of the surface mount cup as a template. mark the screw hole and drill them using a 1/8" (3mml drill bit. Drill a second hole (for the speaker wire) using a 3/16" (5mm) drill bit. 2. Screw surface mount cup to the panel. 3. Push the tweeter wires through the open area at the bottom of the cup and through the 3/16" (5mm) hole in the panel. 4.
DEUTSCH Abbildung 15 Oberflachenmontage HOCHTONER-MONTAGE 1. Verwenden Sie die Unterseite des Oberflachenmontagebechers als Schablone und markieren Sie damit das Schraubenloch, das Sie mit einem 3-mm-Bohrer bohren. Bohren Sie ein zweites Loch (fOr das Lautsprecherkabel) mit einem 5-mm-Bohrer. 2. Schrauben Sie den Oberflachenmontagebecher an die Platte. 4. Verbinden Sie die Drahte von den HochtOneranschliissen am Crossover mit den HochtOnerdrahten unter Verwendung der FastonAnschlOsse.
ENGLISH db Series Full Range/Component Systems Specifications 14 db351 db401 db461 db461p db501 db521 Type 31/2" coaxial 4" coaxial 4" x 6" coaxial 4" x 6" plate 5" coaxial 51/4" coaxial Driver complement 31/2" (8.89cml mid/woofer 4" (1O.2cml mid/woofer 4" x 6" (lOcmx15cml mid/woofer 4" (10.2cm) mid/woofer 5" (12.
db Series Full Range/Component Systems Specifications db571 5" x 7" coaxial db651 61/2" coaxial db651s 61/2" slim mount coaxial db691 6' x 9' three way db5251 51/4' component system db6501 61/2" component system dbl0D1 5'x]" (12.7cm x 17.8cm) mid/woofer 61/2' (16.0cml mid/woofer 61/2" (16.0cm) mid/woofer 6" x 9' (15cm x 22.9cm) mid/woofer 51/4' (13.0cml mid/woofer 61/2' (16.
ESPANOL Especificaciones de los modelos de la serie de gama completa de frecuencias 16 db351 db401 db461 db461p Tipo 3 1/2" coaxial 4" coaxial 4" x 6" coaxial 4" x 6" placa db501 5" coaxial 51/4" coaxial Dotaci6n de excitadores 31/2" (8.89cm) woofery frecuencias medias 4" (1O.2cm) woofery frecuencias medias 4" x 6" (lOcm x 15cm) woofery frecuencias medias 4" (10.2cm) woofery frecuencias medias 5" (12.7cml woofery frecuencias medias 51/4" (13.
Especificaciones de sistemas de componentes de los modelos de la serie db db571 5" x 7' db651 6 1/2" coaxial db651s 6 1/2" coaxial de montaje delgado db691 6" x 9" tres canales db5251 51/4" sistema de componentes db6501 6 1/2" sistema de componentes db1001 1" tweeter 5" x 7" (12.7cm x 17.8cm) woofery frecuencias medias 61/2" (16.0cm) woofery frecuencias medias 61/2" (16.0cml woofer y frecuencias medias 6" x 9" (15cm x 22.9cml woofer y frecuencias medias 51/4" (13.
FRANCAIS Serie db agamme integraIe-Fiche technique 18 db351 db401 db461 db461p Type 31/2" coaxial 4" coaxial 4" x 6" coaxial 4" x 6" plateau db501 5" coaxial db521 51/4" coaxial Transducteurs 31/2" 18.89cm) med/woofer 4" 1102cm) med/woofer 4" x 6" 110cmx 15cm) med/woofer 4" (10.2cm) med/woofer 5' 112.7cml med/woofer 51/4" (13.
Systemes-composants de la Serie db-Fiche technique db571 5"x7" coaxial db651 61/2' coaxial db651 s 61/2" coaxial a profil ultra-mince db691 6"x9" 3 voies db5251 51/4" systemecomposants db6501 61/2" systemecomposants 5" x 7" 61/2' (16.0cm) med/woofer 61/2" (160cm) med/woofer 6' x 9" (15cm x 22.9cm) med/woofer 51/4" (13.0cm) med/woofer 61/2" (16.0cm) med/woofer n/a med/woofer 3/4" (19mml tweeter a dome soupIe 3/4" (19mm) tweeter a dome souple 3/4" (19mml tweeter a dome souple 1" (25.
DEUTSCH db-Serie: Vollbereichs-Spezifikationen db351 db401 db461 db461p db501 db521 Typ 31/2" koaxial 4" koaxial 4" x6" koaxial 4" x 6" platte 5" koaxial 51/4" koaxial Treiberbaugruppe 31/2" (8.89cm) mitteltieftiiner 4" (10.2cm) mitteltieftiiner 4" x 6" (1 Ocm x 15cm) mitteltieftiiner 4" (10.2cml mitteltieftiiner 5" (12.7cm) mitteltieftiiner 51/4" (13.
db-Serie: Komponentensystem-Spezifikationen db571 5" x 7" koaxial db651 6 1/2" koaxial db651s 61/2" platzsparende koaxialmontage db691 6" x 9' dreiweg db5251 51/4" komponentensystem db6501 61/2" komponentensystem 5' x 7" (12.7cm x 17.8cm) mitteltieftiiner 61/2" (16.0cml mitteltieftiiner 61/2' (16.0cm) mitteltieftiiner 6" x 9" (15cm x 22.9cml mitteltieftiiner 51/4' (13.0cm) mitteltieftiiner 61/2" (16.
PORTUGUES Especifica'toes da serie db db351 db401 db461 db461p db501 db521 Tipo 31/2" coaxial 4" coaxial 4" x 6" coaxial 4" x6" placa 5" coaxial 51/4" coaxial Driver complement 31/2" (8.89cm) woofer media 4" (10.2cm) woofer media 4" x 6" (10cm x 15cml woofer media 4" (10.2cm) woofer media 5" (12.7cm) woofer media 51/4" (13.
Especifica~oes dos sistemas componentes da serie db db571 5" x 7" coaxial db651 6 1/2" coaxial db651s 6 1/2" coaxial de perfi I delgado db691 6" x 9" tridirecional db5251 51/4" sistema componente db6501 61/2" sistema componente db1001 l' tweeter 5" x 7" (12.7cm x 17.8cml woofer medio 61/2" (16.0cm) woofer medio 61/2" (16.0cm) woofer medio 6" x9" (15cm x 22.9cm) woofer medio 51/4" (13.0cm) woofer medio 61/2" (16.
ITALIANO Dati tecnici dei modelli Serie db Tipo -_ ................. db351 db401 db461 db461p db5D1 db521 31/2" coassiale 4" coassiale 4" x 6" coassiale 4" x 6" piastra 5" coassiale 51/4" coassiale ....................... ............................. ............ _--_. -_ ............. _- ... Driver complement 31/2" (8.89cm) mid/woofer 4" (lO.2cm) mid/woofer 4" x 6" (lOcm x 15cm) mid/woofer 4" (lO.2cm) mid/woofer 5" (12.7cm) mid/woofer 51/4" (13.
Dati tecnici dei sistemi componenti Serie db db571 5" x 7" coassiale db651 6 1/2" coassiale db651s 6 1/2" coassiale a filo db691 6" x 9" a tre vie db5251 51/4" sistema componente db6501 61/2" sistema componente db1001 1" tweeter 5" x 7" (12.7cm x 17.8cm) mid/woofer 61/2" (16.0cml mid/woofer 61/2" (16.0cm) mid/woofer 6" x9" (15cm x 22.9cm) mid/woofer 51/4" 113.0cm) mid/woofer 61/2" (16.
db: Inc red i b I e Sou n d, A f for dab I e Prj c e
1 YEAR WARRANTY Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio db Product (the Product) will be free from defects in materials and workmanship for a period of (1) one year from the date of original retail purchase from a Polk Audio Authorized Dealer. However, this warranty will automatically terminate prior to the expiration of the (1) one year period if the original retail purchaser sells or otherwise transfers the Product to any other party.
polkaudio® This is your Product Model and Serial Number. Enter this number in the "Serial Number" space when registering your product online. Keep this card handy for Model and Serial Number reference when calling Polk Customer Service. SERIAL#;~ Register Your New Polk Audio Product Online NOW for aChance to win $500 of Polk Product www.polkaudio.com/registration/ ig,gr . . .8W product: ;'j" ~ ~ ~ ~ ~ Creates a permanent record of your purchase, in case you misplace your original receipt.