© 2017 All Rights Reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
1
2
Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Polaroid makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera. NOTE: Your camera requires a Micro SD Memory card Class 4 or higher (up to 32GB) for normal use. Micro SD Memory cards are not included and need to be purchased separately. This camera is a Plug and Play device.
1. Digital Camera 2. USB Cable 3. Wrist Strap NOTE: Micro SD Memory Card Class 4 or higher and batteries not included.
1. Shutter Button 11. Up / Tele - Zoom In (T) Button 2. Power On/Off Button 12. Down / Wide - Zoom Out (W) Button 3. LCD Switch Button 13. Left / Flash Light Button 4. Wrist Strap Connector 14. Right / Playback Button 5. Small LCD Monitor (front) 15. MODE Switch Button 6. Flash 16. Menu / OK / Delete Button 7. Lens 17. Battery Compartment 8. LED Busy Indicator 18. Micro SD Memory Card Slot 9. Macro/Normal Switch 19. USB Port 10. LCD Screen (back) 20.
Insert 2 x AAA (1.5V) batteries. Alkaline batteries recommended. Batteries not included. Micro SD Memory Card Class 4 or higher (up to 32GB) needed for normal use. Micro SD Memory Card not included.
Use 2x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included. 1) Open the battery/memory card compartment door. 2) Insert the batteries properly into your digital camera, according to the polarity shown inside the battery compartment. 3) Securely close the battery/memory card compartment door. NOTE: Remove the batteries from the camera when not in use for an extended period. Do not mix alkaline and non-alkaline batteries.
Make sure a Micro SD card Class 4 or higher has been properly inserted into your camera. Micro SD Memory card not included. To properly insert the Memory Card: 1) Turn off the camera. 2) Open the battery/memory card compartment door. 3) Insert the Micro SD Card into the slot in the direction shown on the camera (see SD icon by the Micro SD card slot). Refer to images: 1 and 2. 4) Push the Micro SD Card until you hear a slight clicking sound.
IMPORTANT: The Micro SD memory card must be formatted before taking photographs. Formatting the Micro SD Memory Card: 1) Press the MENU button in Photo Capture or Video Capture Mode to open the menu options. 2) Press the LEFT or RIGHT button to select the ‘Format Memory Card’ option. 3) To format the memory card, press the DOWN (W) or UP (T) button to highlight and select the ‘Yes’ and then press the 4) MENU button to confirm. You will be asked to reconfirm.
After powering the camera ON for the first time the camera will take you through the initial camera setup. 1) You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice by pressing the DOWN (W) or UP (T) button. 2) Then press the MENU button to confirm the selection. 3) After selecting a language, you will be asked if you would like to continue with the initial camera setup.
Next you will be asked to set the default INSTA Share destination for photos and videos taken with your camera. The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to social networks with the accompanying software application. 1) First you will be asked to choose the default INSTA Share social network for Photos. Press the DOWN (W) or UP (T) button to highlight the desired default social network and then press the 2) MENU button to confirm the selection.
Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture is automatically saved to your camera’s memory card.
Image Sensor CMOS Sensor Image Resolution 18MP (4896x3672), 16MP (4608x3456), 14MP (4416x3312), 12MP (4000x3000), 10MP (3648x2732), 8MP (3264x2448), 7MHD (3648x2048), 5MP (2592x1944), 3MP (2048x1536), 2MHD (1920x1080), VGA(640x480) Video Resolution HD (1280x720), VGA (640x480), QVGA (320x240) File Format JPEG (Photo); AVI (Video) External Memory Micro SD Memory Card Class 4 or higher (up to 32GB) LCD Display 2.8+1.8" Dual TFT screen Lens f=5.8mm, F2.8 Zoom 4X Digital Zoom Exposure -3.
To be able to download photos and videos to your computer using the Polaroid Instant Memories Software, you will need the following minimum configuration: MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1, Windows 7 or higher Pentium® 4 processor (or above) 1 GB of RAM, with 250 MB of free hard disk space 16-bit Color monitor, 1024 X 768 recommended screen resolution CD-ROM Drive QuickTime® 6 or higher MICROSOFT ® Internet Explorer 7 or higher Windo
Make sure the batteries (not included) have been inserted properly into your digital camera. Make sure the Micro SD card has been inserted properly into your digital camera. Micro SD card Class 4 or higher and up to 32GB - not included. Please see Initial Camera Setup for more information. Press the Power button to turn your camera ON. After powering on, the LED light turns on briefly and the LCD screen turns on with your camera in Photo Capture Mode.
Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera. 2) Video Capture Mode - Use this mode to capture videos with your camera. 3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera. When the camera is first powered ON, the Photo Capture Mode will be active.
Each camera mode has a set of menus specific to that mode. 1) Press the MENU/OK button to open the menus for the current mode. NOTE: In Playback Mode only, long press the MENU/OK button for approximately 3 seconds until the menu screen appears. 2) Press the LEFT or RIGHT button to scroll between the various menus for the current mode. 3) Press the DOWN (W) or UP (T) button to highlight the desired setting.
The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. An INSTA Share destination can be assigned to a photo or video in Capture mode prior to capturing your image or in Playback Mode. INSTA Share: Video or Photo Capture Mode Press the MENU/OK button and then press the LEFT or RIGHT button to select the INSTA Share menu option.
You can easily include yourself in your captured photos and videos by using the LCD screen on the front of the camera. 1) Before taking the photo or video, ensure that the Macro Switch on the side of the camera is up and in the MACRO ON position 2) . The flower icon will appear on the LCD display. Then simply press the LCD Switch button and hold the camera steady facing towards you at arm’s length (30~45cm). 3) Make sure you can see yourself on the LCD screen on the front of the camera.
The flash is enabled for each photo. NOTE: If you use this option in a well-lit environment, your photo Forced On may be appear too bright/light (overexposed). A When you want the camera to determine if Flash is needed, select Auto Flash. Auto Flash The flash will automatically turn on according to the lighting conditions. When the LED light stops blinking, the Flash is ready for use. NOTE: In some cameras, an initial flash appears to test your lighting conditions.
Your camera contains a MACRO feature that allows you to enable or disable the MACRO mode on your camera. When enabled, the MACRO mode allows your camera to focus on an object that is close to the camera. MACRO ON: Close-up Photographs While using the Macro mode, you can capture images at close range (11cm ~ 18 cm).
The Photo Capture mode allows you to capture pictures with your digital camera. When the camera is first powered on, the camera will be in Photo Capture Mode. 1) Power on your camera: Photo Capture Mode is the default mode that appears upon powering on your camera. 2) Select the scene with the LCD Display: Use the LCD display on the back of the camera to direct the camera at the scene you would like to capture.
You can also use the Self Timer feature when you would like to include yourself in the photograph. In order to see yourself and set the scene as you would like, use the LCD screen on the front of the camera. It is recommended to use a tripod in order to avoid shaking of the camera. 1) While in Photo Capture Mode, press the MENU button to open the menus options.
Quick Function Description Button LEFT FLASH: Toggles the following Flash options appearing on the LCD: Forced Off, RIGHT UP / T DOWN / W Forced On, A Auto Flash, Red Eye Reduction NAVIGATES MENU: Navigates within the Menus. PLAYBACK: Opens the Playback Mode. NAVIGATES MENU: Navigates within the Menus. ZOOM: Zooms IN NAVIGATES MENU: Navigates within the Menus. ZOOM: Zooms OUT NAVIGATES MENU: Navigates within the Menus.
The following are the menus that appear in your camera’s Photo Capture Mode: The Once you change a setting, the setting is saved by your camera until you manually change the selection icons below appear by the default settings. setting or restore the camera’s default factory settings.
INSTA Share for Photos The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘INSTA Share for Photos’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Scene’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode.
memory on your camera. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Image Quality’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode. MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item.
Anti-Shake Menu The Anti-Shake feature reduces image distortion that can be caused by movement of the camera while capturing the image. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Anti-Shake’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode. MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item.
White Balance Menu The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment. Properly adjusting the White Balance setting to match your current environment will allow the camera to properly balance the colors in the images that are taken with your camera. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘White Balance’ menu.
Image Sharpness Menu You can set the level of sharpness in the images taken with your camera. The sharpness level dictates if the edges of objects in the image are more or less distinct. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Image Sharpness’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode. MENU/OK button to confirm and select the highlighted menu option.
Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. ISO Menu The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment. When the ISO level is increased, the image sensor in your camera will be more sensitive to light and allow you to capture images in lower-light situations.
several zones for light metering such as complex light conditions, position of subject, brightness, background, direct light and scenes Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject in the center of the monitor. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Metering’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode.
Date/Time Menu When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera’s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
Silent Mode Menu You have the option of activating the camera’s ‘Silent Mode’ to disable all of the sound effects (except for beeps heard during the Self-Timer countdown) that the camera emits when performing camera functions. NOTE: This does not affect the sound during video recording. The camera features that emit sounds include - Power On, Power Off, Shutter ‘Click’ and Self-Timer. The Silent Mode Options include: Silent Mode Off (default): All camera features will emit sound when activated.
4) Press the A 5) MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode.
Format Memory Card Menu You can use the ‘Format Memory Card’ menu to delete all of the content that is currently on your camera’s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camera’s memory card. This option will delete all of the content at one time. If you would like to delete individual images, use the delete menu in the camera’s Playback mode. NOTE: Restoring factory defaults or formatting the camera may result in the loss of data.
previous mode without resetting to the default setting. Select “Yes” and press the MENU/OK button to proceed with the reset. You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings. NOTE: After RESETTING to the default settings, it is recommended to select your system Language, Date/Time and INSTA Share for Photos and Videos.
The Playback Mode allows you to review and edit photos and videos that you’ve already taken with you camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to enter the Playback Mode or press the PLAYBACK button to open the Playback Mode. Press the MODE button to exit the Playback Mode and return to Capture Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
Use the LEFT, RIGHT, MODE (M) (move Up) and MENU (move Down) buttons to navigate around the magnified photo. Easily navigate and select the image you wish to view by using the Thumbnail View. The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails. To access the Thumbnail View: 1) Press the PLAYBACK button to open the Playback Mode. 2) Press the DOWN/W - Zoom Out button.
Quick Function Description Button LEFT RIGHT UP / T PREVIOUS IMAGE: Displays the previous image. NAVIGATES MENU: Navigates within the Menus and Thumbnail view. PLAYBACK: Opens the Playback Mode. NEXT IMAGE: Displays the next image. NAVIGATES MENU: Navigates within the Menus and Thumbnail view. ZOOM: Zooms IN to magnified photo. NAVIGATES MENU: Navigates within the Menus. THUMBNAIL VIEW: Opens the Thumbnail View.
The following are the menus that appear in your camera’s Photo Playback Mode: Access the Menus To access the Photo Playback menus: 1) Press the Playback button to enter Playback Mode. 2) ‘Delete File’ Menu: Quick press the MENU/ DELETE button in Playback Mode to open the ‘Delete File’ menu. This menu allows you to delete the selected file currently viewed in Playback Mode. 3) Photo Playback Mode Menus: Press and hold the MENU/ DELETE button in Playback Mode until the Photo Playback menu appears.
Delete Menu While in the Playback Mode, you can delete pictures from your camera through the ‘Delete’ menu. 1) Select the photo you would like to delete. 2) Long press the 3) Press the LEFT or RIGHT button to scroll and select the ‘Delete’ menu. 4) Press the UP or DOWN button to highlight a specific option. MENU button to open the menus for the current mode. To delete the selected photo: Select “Delete This Photo” and press the MENU button. You will be asked to confirm the deletion of the photo.
INSTA Share for Photos The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. 1) Select the photo you to which you would like to add/change an INSTA Share destination. 2) Long press the 3) Press the LEFT or RIGHT button to scroll and select the ‘INSTA Share for Photos’ menu. 4) Press the UP or DOWN button to highlight a specific option.
5) Press the MENU button to select and save the desired option. 6) The selected picture will now appear rotated in the Playback mode. Crop Image Menu You can crop any picture on your camera with the Crop feature. 1) View the photo you would like to crop. 2) Long press the 3) Press the LEFT or RIGHT direction control button to scroll and select the ‘Crop’ menu. 4) Press the UP or DOWN to highlight the Crop option. 5) Press the 6) The Crop window will open on the selected picture.
To Lock the Selected Image: To lock the selected image use the UP or DOWN button to highlight ‘Lock This Photo’ and then press the icon MENU button. The image now appears in Playback Mode with the lock . To Unlock the Selected Image: To unlock the selected locked image use the UP or DOWN button to highlight ‘Unlock This Photo’ and then press the MENU button. The image now appears in Playback Mode without the lock icon.
4) Press the UP or DOWN direction control button to scroll through the menu options. 5) Press the MENU button when highlighting the ‘Print This Photo’ option to print the selected photo. 6) You will be asked to connect the camera to the PictBridge printer. 7) Connect the USB cable provided in the package from the camera to the PictBridge port of the printer. 8) Once connected, follow the instructions on the printer to proceed with the printing process.
The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE (M) button once to access the Video Capture Mode. 1) Power on your camera: Photo Capture Mode is the default mode that appears upon powering on your camera. Press the MODE (M) button to enter Video Capture Mode. The Video icon appears on the top left.
Quick Function Description Button LEFT NAVIGATES MENU: Navigates within the Menus. RIGHT PLAYBACK: Opens the Playback Mode. NAVIGATES MENU: Navigates within the Menus. ZOOM: Zooms IN NAVIGATES MENU: Navigates within the Menus. ZOOM: Zooms OUT NAVIGATES MENU: Navigates within the Menus. START/STOP: Starts and stops the video capture. UP / T DOWN / W Other SHUTTER VIDEO CAPTURE MENU: Opens the menu options for Video Capture MENU/OK Mode.
The following are the menus that appear in your camera’s Video Capture Mode: The Once you change a setting, the setting is saved by your camera until you manually change the selection icons below appear by the default settings. setting or restore the camera’s default factory settings.
INSTA Share for Videos The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘INSTA Share for Videos’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode.
4) Press the A 5) MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen.
2) Press the LEFT or RIGHT button to scroll and select the ‘Image Quality’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item.
Color Effect Menu You can choose to add a color effect to the images taken with your camera. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Color Effect’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode. MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item.
Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters your camera’s lens. This setting should be adjusted when the environment is lighter or darker than normal. When the environment has more light than is needed, reduce the exposure setting (by using the negative - count) to reduce the amount of light allowed into the lens by your camera.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. Metering Menu The Metering setting will affect how your camera focuses when capturing an image.
Language Menu You can select your camera’s language setting by selecting the desired language from the Language menu. 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Language’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the A 5) MENU/OK button to open the menus for the current mode. MENU/OK button to confirm and select the highlighted menu option. selected option icon appears on the selected item.
5) To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. To Set the Date and Time: 1) Press the MENU/OK button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu.
Frequency Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country’s electric current, you may see waves on the images taken by your camera. 50Hz – UK, Europe and Australia 60Hz – US, Canada and South America 1) Press the 2) Press the LEFT or RIGHT button to scroll and select the ‘Frequency’ menu.
MENU/OK button. - FORMAT: To proceed with the format, select “Yes” and press the MENU/OK button. You will be asked to confirm the formatting of the memory card. • Select ‘No’ and press the • Select ‘Yes’ and press the MENU/OK button to exit without formatting. MENU/OK button to begin the format. The memory card will be completely formatted.
The Playback Mode allows you to review and edit photos and videos that you’ve already taken with you camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE (M) button twice to enter the Playback Mode or press the PLAYBACK button to open the Playback Mode. Press the MODE button to exit the Playback Mode and return to Capture Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
Easily navigate and select the image you wish to view by using the Thumbnail View. The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails. To access the Thumbnail View: 1) Press the PLAYBACK button to open the Playback Mode. 2) Press the DOWN/W - Zoom Out button. All the images (photos and videos) on your camera will appear in the Thumbnail View. - Videos appear with ‘AVI’. - Photos appear with ‘JPG’.
Quick Function Description Button LEFT RIGHT UP / T STOP: Stops the playing video. PREVIOUS IMAGE: Displays the previous image. NAVIGATES MENU: Navigates within the Menus. PLAYBACK: Opens the Playback Mode. NEXT IMAGE: Displays the next image. NAVIGATES MENU: Navigates within the Menus. NAVIGATES MENU: Navigates within the Menus. THUMBNAIL VIEW: Opens the Thumbnail View.
The following are the menus that appear in your camera’s Video Playback Mode: Access the Menus To access the Photo Playback menus: 1) Press the Playback button to enter Playback Mode. 2) ‘Delete File’ Menu: Quick press the MENU/ DELETE button in Playback Mode to open the ‘Delete File’ menu. This menu allows you to delete the selected file currently viewed in Playback Mode. 3) Video Playback Mode Menus: Press and hold the MENU/ DELETE button in Playback Mode until the Video Playback menu appears.
If you would like to proceed with deleting the current image, select ‘Yes’ and press the MENU button to confirm. The video will be deleted and you will exit the menu and return to the Playback mode. If you do not want to delete the current image, select ‘No’ and press the MENU button. The video will not be deleted and you will exit the menu and return to the Playback mode.
7) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. NOTE: An icon appears on the image with the selected INSTA Share destination site when you return to the Playback display. Remember that the INSTA Share feature is deactivated by default. An INSTA Share destination will only be assigned to a photo or video if you manually set it from this menu or from the INSTA Share menu in Capture mode.
To Unlock All Images: To unlock all locked videos and photos use the UP or DOWN button to highlight ‘Unlock All Images’ and then press the MENU button. The images now appear in Playback Mode without the lock icon. 5) Press the MODE button at any time to exit the menu and return to your previous mode. NOTE: Any image that is locked displays a lock symbol on the LCD screen when viewing that image in the Playback Mode. Videos that are not locked do not display the lock symbol.
You must be connected to the Internet to download, install and run the Polaroid Instant Memories software. The Polaroid Instant Memories Software can be downloaded and installed via the following online links: WINDOWS OS: http://tinyurl.com/polaroid-setup-win MAC OS: http://tinyurl.com/polaroid-setup-mac 1) Enter the appropriate URL (shown above) into a web browser on your computer. Alternatively, click on one of the above links to open the URL in a browser.
1) Use the USB cable that came with your camera to connect your camera to your computer. Open the camera’s USB port (also Micro SD card/Battery) compartment cover. Connect the smaller end of the USB cable to your camera and the larger end to your computer’s USB port. 2) Press the Power button. 3) The first time you connect the device to the computer you may have to wait a few seconds until the computer recognizes the device. An SD card needs to be inserted. Do not disconnect the cable during transfer.
2) The “Get Images from device” window opens. 3) You can select to download photos, videos or both. 4) Select your camera (removable disk) from the device window. If your camera is the only USB device connected then it will be selected automatically. 5) Select a location on the computer where to place the new photo and video files. 6) Add the new photo and video files to albums if desired. 7) Select to remove the media files from the selected device (removable disk) after the import.
1) Use the USB cable that came with your camera to connect your camera to your computer. 2) MSDC appears on the LCD. 3) A window appears with a list of options, select “Open folder to view files” and click OK. 4) Open the DCIM folder and the folder inside to view the media files. 5) Select the media and copy the files from this folder into your computer. Optionally, select the files and choose Copy from the Edit menu. Then select a folder and choose Paste from the Edit menu.
NOTE: Please check your device packaging for compatibility with the iPad. Apple iPad Camera Connection: For models that are compatible with the iPad, photos and videos can be imported from your digital camera to your iPad by following either one of the options below: 1) Connecting your digital camera to your iPad using an iPad Camera Connector: Plug the Camera Connector into the dock connector port on your iPad, and then attach your digital camera using a USB cable (included) to the Camera Connector.
This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
For technical support issues please visit our website at www.polaroid.com. For further assistance, you can also call our technical support department toll free at 877-408-0033, or for e-mail support, please contact us at polaroid@sakar.com. Q: I have taken photos and selected the “Get Images” button. I get a message that the images were successfully transferred but the photos do not appear on my computer. What do I do? First ensure that you have in fact taken photos.
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery.
E-Waste - PLR IP Holdings, LLC, its licensees, affiliates, and Sakar International, Inc. fully supports all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside.