User manual CS600 PRODUCT NAME Page 1 of 3 MANUAL NAME User manual CS600 1. Introduction 2. Cycling Computer Components 3. Getting Started Measuring Wheel Size Basic Settings Menu Structure 4. Prepare for Training Installation of the sensors Plan your training Exercise Types Create New Exercises With Your Cycling Computer Create New Exercises with Polar ProTrainer 5 5.
User manual CS600 Page 2 of 3 Automatic Lap Recording Heart Rate View Sport Zones Bike Settings Wheel Size Autostart: On / Off Arrival time Speed: On / Off Cadence*: On / Off Power*: On / Off User Settings Heart Rate: HRmax, HRsit Maximal Oxygen Intake: VO2max General Settings Sound Volume TZ Alarm (Target Zone Alarm) Keylock Units Language Sleep Watch Settings Reminder Event Alarm Time Time zone Date Personalize the Cycling Computer Display Shortcut Button (Quick Menu) 8.
User manual CS600 Page 3 of 3 Before the Test Performing the Test After the Test OwnOptimizer Trend Delete OwnOptimizer Value Reset the Trend File Analyzing Results with Polar ProTrainer 5 software 10. Using a New Accessory Teaching Teach New Transmitter Teach New Speed Sensor Teach New Cadence Sensor* Teach New Power Output Sensor* 11.
1. Introduction PRODUCT NAME Page 1 of 1 MANUAL NAME 1. INTRODUCTION Congratulations! You have purchased a complete training system to tailor-fit your training needs. This user manual includes complete instructions, helping you get the most out of your cycling computer. file://D:\User_manual\CS600\ch01.html 13.11.
2. Cycling Computer Components PRODUCT NAME Page 1 of 1 MANUAL NAME 2. CYCLING COMPUTER COMPONENTS 1. Polar CS600 Cycling Computer: Cycling and exercise data are recorded and displayed during exercise. 2. Polar WearLink® W.I.N.D. Coded Transmitter: The transmitter sends the heart rate signal to the cycling computer. The transmitter consists of a connector and a strap. 3. Polar Bike Mount™: Secure the bike mount to your bike and attach the cycling computer to it. 4. Polar Speed Sensor™ W.I.N.D.
3. Getting Started Page 1 of 4 PRODUCT NAME MANUAL NAME 3. GETTING STARTED Before activating your cycling computer, measure the wheel size of your bicycle. MEASURING WHEEL SIZE Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining the wheel size of your bike: Method 1 Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in millimeters in the right column of the chart.
3. Getting Started Page 2 of 4 BASIC SETTINGS Before using your cycling computer for the first time, customize the basic settings. Enter as accurate data as possible to ensure correct feedback based on your performance. To adjust the data, use UP, DOWN and accept with OK. The values scroll faster if you press and hold UP or DOWN. 1. To activate your cycling computer, press OK twice. Once activated, it cannot be switched off! 2. Welcome to Polar Cycling World! is displayed. Press OK. 3.
3. Getting Started Page 3 of 4 10. Units: Select metric (kg/cm/km) or imperial (lb/ft/mi) units. 11. Weight: Enter your weight. To change units, press and hold the LIGHT. 12. Height: Enter your height. In LB/FT format, first enter feet then inches. 13. Birthday: Enter your date of birth; dd=day, mm=month, yy=year 14. Sex: Select Male or Female. 15. Settings OK? is displayed. Select Yes or No. Select Yes to accept and save settings. The cycling computer will display time of day.
3. Getting Started Page 4 of 4 file://D:\User_manual\CS600\ch03.html 13.11.
4. Prepare for Training PRODUCT NAME Page 1 of 4 MANUAL NAME 4. PREPARE FOR TRAINING INSTALLATION OF THE SENSORS Polar Bike Mount and CS600 Cycling Computer For instructions on how to install the Polar Bike Mount and the Polar CS600 Cycling Computer, consult Speed Sensor user manual. Polar Speed, Cadence and Power Output Sensors For instructions on how to install the sensors, consult the separate Speed, Cadence or Power Output Sensor user manuals.
4. Prepare for Training z Page 2 of 4 OwnZone: OwnZone-based exercise with moderate intensity. The cycling computer is able to automatically determine your individual aerobic (cardiovascular) heart rate zone during warm-up. This is called OwnZone. Suggested duration 45 minutes. For further information, see Determine Your OwnZone. For additional background information, see OwnZone Training.
4. Prepare for Training Page 3 of 4 Create a New Exercise with Zones Create your own exercise with the cycling computer. Select Settings > Exercises > Add new 1. Set the number of zones for the exercise (0-3) and press OK. Also see Creating a New Exercise Without Zones. 2. Choose zone type: A. Heart rate B. Cadence* C. Power* Press OK. A. For heart rate, select Sport zone, or Manual to set heart rate zone manually. Press OK. z Sport zone: Select one of the sport zones (e.g.
4. Prepare for Training Page 4 of 4 Once you have defined the first zone, Zone 1 OK is displayed. For more than one exercise zone, repeat steps 2 and 3 until all zones are defined. When the exercise is ready, New exercise added is displayed. The new exercise (NewExe) is stored in the Exercises menu, where you can select it for your next workout. Rename the exercise by selecting Rename from the list.
5. Training PRODUCT NAME Page 1 of 10 MANUAL NAME 5. TRAINING WEAR THE TRANSMITTER Wear the transmitter to measure heart rate. 1. Moisten the electrode areas of the strap under running water and make sure that they are well moistened. 2. Attach the connector to the strap. Position the connector's letter L to the word LEFT on the strap and snap the fastener. Adjust the strap length to fit snugly and comfortably.
5. Training Page 2 of 10 Wear the transmitter and attach the cycling computer to the bike mount. 1. Start heart rate measurement by pressing the OK button. The cycling computer goes into pause mode. 2. Select the bike you are going to exercise with. Bike 1 is set as a default. Select Settings > Bike > Bike 1 > OK. Select Other if you only want to record heart rate. Only the bikes that are switched ON are shown on this selection list. For further information see Bike Settings.
5. Training Page 3 of 10 z Seek sensor: The cycling computer seeks the sensor signal. z A.Lap (Automatic Lap): Switch the automatic lap function On/Off. z Arr. time: Set the arrival time function On/Off and set the distance of your ride. z Display: Modify the display. For further information, see Personalize the Cycling Computer Display. Here are some shortcuts you can use, when in Exercise pause menu: z Press and hold UP to quickly change training session type.
5. Training Page 4 of 10 Trip distance Speed in km/h Heart Rate Burned calories/ hour Trip distance Current heart rate Stopwatch Average heart rate Average speed Stopwatch Altitude Time of day Incline Altitude in meters Graph Heart rate graph Altitude in graph Stopwatch (Total duration of the exercise so far) Zonelock Countdown timer Zone pointer Current heart rate Customize the cycling computer display to show information you want to see. See Personalize the Cycling Computer Display.
5. Training Page 5 of 10 The graph view enables comparison in graphs of two values during exercise. For example, choose a graphical overview of your heart rate and speed. The graph view can be customized. For the upper and middle rows, you can choose to view Power, Speed, Altitude or Heart rate in graphs. SYMBOLS ON THE DISPLAY Text on the display Symbol Explanation Time of day Time of day Cycling symbol All the necessary sensors are found when the symbol stops blinking.
5. Training Page 6 of 10 Cycl. Economy Cycling economy as kcal/km or Cal/mi. Numerical comparison of cycling efficiency and economy between different exercises or circumstances, or even between different riders. Ascent Ascended meters/ feet Inclinometer Uphill/downhill steepness in percentages and grades.
5. Training Page 7 of 10 Lap distance Average speed Lock a Zone When training without preset target zones (FREE exercise), you can lock your heart rate into a sport zone. For more information see Polar Sport Zones. This way, if you haven’t had time to define preset target zones prior to exercise, you can set a target zone on the go during a session. Press and hold LAP (OK) to Lock /Unlock zone.
5. Training Page 8 of 10 Press and hold LIGHT > Settings The Settings menu is displayed when pressing and holding LIGHT. In the settings menu you can change certain settings without pausing the exercise recording. The contents of this menu vary according to the exercise type. For further information, see 7. Settings. z Prev. phase: View summary information of the previous phase or repetition (displayed when you have created an exercise with phases with the Polar ProTrainer 5 software).
5. Training z Page 9 of 10 Free mode: Change your exercise profile to free exercise type. This does not delete the exercise you have performed, but will continue the exercise without settings. If you switch to Free mode, you can restart the original exercise by pausing the exercise again, and choosing Restart P1. DETERMINE YOUR OWNZONE For background information on Polar OwnZone®, see OwnZone Training. Select Settings > Exercise > OwnZone.
5. Training Page 10 of 10 3. Once you hear two consecutive beeps this means your OwnZone has been determined. 4. OwnZone Updated and the heart rate zone are then displayed. The zone is displayed in beats per minute (bpm) or as a percentage of maximum heart rate (HR%) or as a percentage of your heart rate reserve (HRR%), depending on your settings. 5. If OwnZone determination was not successful, your previously determined OwnZone will be used and OwnZone Limits is displayed.
6. After Training PRODUCT NAME Page 1 of 12 MANUAL NAME 6. AFTER TRAINING Care for your transmitter after exercise. Detach the connector from the strap after use. Keep the transmitter dry and clean. For complete care and maintenance instructions, see Care and Maintenance. ANALYZE EXERCISE RESULTS To view basic data on your performance, see File on your cycling computer. For more comprehensive analysis, transfer the data to Polar ProTrainer 5 software.
6. After Training Page 2 of 12 Select File > Exercise log You can view detailed information on your exercise sessions in the Exercise log. The following info will appear: z Exercise name. z A graphic bar representing an exercise session. The height of the bar indicates exercise duration. z Date of the exercise. Information appearing on the display (a - e displays below) depends on the settings and exercise type and settings (e.g.
6. After Training Page 3 of 12 e. Laps information a. Basicinformation Select File > Exercise log. Scroll UP and DOWN to select the exercise and press OK. Scroll UP and DOWN to view the following information: Name of exercise Time when exercise began Distance traveled Total time of exercise Heart rate in beats per minute (bpm), alternating with a percentage of your maximum heart rate (HR%) or as a percentage of your heart rate reserve (HRR%).
6. After Training Page 4 of 12 Energy expenditure indicates overall exertion during exercise. Press BACK to return to the basic information view. Additional Basic Information To add your own exercise information or delete the exercise from File, press and hold LIGHT in basic information view. Select File > OK > Exercise log > OK > Basic > OK, press and hold LIGHT> Add info >OK. z Rank: Grade your exercise. z Feeling: Evaluate your subjective feeling during the exercise. z Temperat.
6. After Training Page 5 of 12 Maximum cadence Minimum cadence Power Maximum power Minimum power Left / right balance Left / right balance in % Pedalling index in % Calories per kilometer Incline Maximum incline in % Minimum incline in degrees Decline Maximum decline in % Minimum decline in degrees Altitude Maximum altitude Minimum altitude Average altitude Ascent/ Descent file://D:\User_manual\CS600\ch06.html 13.11.
6. After Training Page 6 of 12 Ascended meters/feet Descended meters/feet Temperature Maximum oC degrees Minimum oC degrees Average oC degrees Odometer Bike 1, 2 or 3 Kilometers c. Sport Zones Select File > Exercise log > Basic > OK In the basic information view, press DOWN to see Sport zones information. Press OK and scroll UP or DOWN to view time spent in each sport zone. Here, the variation of your sessions is presented in graphical format. Press BACK to return to the Sport zones information view.
6. After Training Page 7 of 12 Select File > Exercise log > Phases The Phases menu is displayed only if the exercise is created with the Polar ProTrainer 5 software and includes phases. In the Sport zones information view, press DOWN to view Phases information. Each phase can be viewed separately. Scroll data of an individual phase by pressing OK. Compare phases by pressing UP or DOWN.
6. After Training Page 8 of 12 Split distance Distance of current phase Cadence* Maximum cadence Average cadence of the current phase Press BACK to return to Phases. * Optional sensor required. e. Laps Select File > Exercise log > Basic > Laps In the Phases information view, see Laps information by pressing DOWN. Laps are shown only if more than one lap is stored in the memory.
6. After Training Page 9 of 12 Heart rate in beats per minute (bpm) alternating with percentage of maximum heart rate (HR%) or as a percentage of your heart rate reserve (HRR%). Maximum heart rate Average heart rate End heart rate of lap Speed min/km Average speed End speed of lap Press and hold LIGHT to switch speed. Distance Lap distance Cadence* Maximum Average cadence of the lap Power* Average power of the lap End power of lap Pedaling index Average % Cycling efficiency file://D:\User_manual\CS60
6. After Training Page 10 of 12 Cycling efficiency is your energy expenditure converted into the power that propels the bike forward. Cycling efficiency is measured, as soon as heart rate rises above 100 bpm/min and the exercise has lasted for more than one minute. If the heart rate drops below 100 bpm/min during the exercise, the counting of the cycling efficiency value will be stopped until your heart rate rises above 100 bpm/min again.
6. After Training Page 11 of 12 Select the week with OK to see the week’s total calories, distance, and exercise time. Press DOWN to see week’s sport zones. To see time spent in each sport zone, press OK and scroll the sport zones UP or DOWN. Totals Select File > Totals Totals includes cumulative information recorded during training sessions since the last reset. Use the Total values file as a seasonal or monthly counter of training data.
6. After Training z Total exerc. count z Total ascent z Total odometer (Cumulative distance; cannot be reset) z Reset totals Page 12 of 12 To reset total values Select File > Totals > Reset totals Select the value you wish to reset in the menu and confirm with OK. Select Yesto confirm resetting. The deleted information cannot be retrieved. Select No to return to the Reset menu.
7. Settings PRODUCT NAME Page 1 of 12 MANUAL NAME 7. SETTINGS Change settings easily by using the Polar ProTrainer 5 software. For further information, consult software help. EXERCISE TYPES Select Settings > Exercise For more information on Exercises, see Exercise Types FEATURE SETTINGS Select Settings > Features. Altitude The cycling computer measures and displays altitude. Change the settings of the altimeter in the Altitude menu. You can calibrate the altimeter manually or automatically.
7. Settings Page 2 of 12 on, this elevation will be always used as the base elevation in the beginning or the exercise, when automatic altitude calibration is in use. Also, if the Automatic Calibration is turned on and you calibrate the cycling computer manually, this new value will be used as a new starting elevation for the Automatic Calibration option. If the elevation or air pressure changes significantly, you are prompted to confirm the change.
7.
7. Settings Page 4 of 12 Press and hold LIGHT to switch between sport zone views: HR% (percentage of maximum heart rate) or BPM (beats per minute) or HRR% (percentage of heart rate reserve). You can change settings easily by using the Polar ProTrainer 5 software. For further information, consult software help. You can lock/unlock sport zone by pressing and holding the LAP button during your ride. BIKE SETTINGS Select Settings > Bike You can set three bike preferences for the cycling computer.
7. Settings Page 5 of 12 z Select by pressing OK z Select On/Off to set the feature on or off. z Select Set dist. to set the distance you are going to ride. Speed: On / Off Select Settings > Bike > Bike 1 > Speed > On/Off As default the speed is On for bike 1. Select On and Teach new sensor is displayed. For further information on teaching the new sensor see Teach New Speed Sensor. Select Off and the computer will select the Speed sensor that already has been taught.
7. Settings Page 6 of 12 Select Settings > Bike > Bike1, Bike 2 or Bike 3 > Power > Settings and > Set chain weight xxxx g > OK > Set chain length xxx mm > OK > Set span length xxx mm > OK For further information on Power settings, consult the Power Output user manual. Use Polar ProTrainer 5 software for Power settings. *Optional sensor required. USER SETTINGS Enter accurate user information in the cycling computer to receive the correct feedback on your performance.
7. Settings z Page 7 of 12 Top: You participate in heavy physical exercise at least 5 times a week, or you exercise to improve performance for competitive purposes. z High: You participate at least 3 times a week in heavy physical exercise, e.g. you cycle 2-4 hours (40-120 km / 2575 miles) per week or spend that time in comparable physical activity. z Moderate: You participate regularly in recreational sports, e.g.
7. Settings Page 8 of 12 Select Settings > General > Sound Volume Select Settings > General > Sound > Volume > On / Off Volume settings control button sounds and activity sounds during exercise. This does not affect the watch or target zone alarms (TZ Alarm). TZ Alarm (Target Zone Alarm) You can set the TZ Alarm On/ Off: Select Settings > General > Sound > TZ Alarm > On /Off If the target zone alarm is deactivated, the heart rate reading will flash when you are outside the target zone.
7. Settings Page 9 of 12 Select Settings > General > Sleep > Activate sleep mode? > Yes Activating the sleep mode will help save the battery when the cycling computer is not in use for a long period of time. The watch alarm will still function in sleep mode. To reawaken the cycling computer Press any button > Turn display on? > Yes / No Yes: the cycling computer is activated. No: the cycling computer returns to sleep mode.
7. Settings Page 10 of 12 Select Settings > Watch > Reminders Select a reminder to view, edit, rename or delete. Event To set an event countdown in the cycling computer Select Settings > Watch > Event Event day: dd=day, mm=month. Rename: To rename the event, select letters with UP or DOWN, and accept with OK. To modify the event countdown Select Settings > Watch > Event You can view the event countdown, set a new date, rename or delete it.
7. Settings Page 11 of 12 Set the desired time difference between time 1 and time 2 in hours with UP/ DOWN buttons. Time zone Switch between time zones Select Settings > Watch > Time zone > Time 1 / Time 2 Select a time zone In time mode, change the time zone by pressing and holding DOWN. Number 2 on the lower right corner of the display indicates that Time 2 is in use.
7. Settings Page 12 of 12 SHORTCUT BUTTON (QUICK MENU) Some settings can be changed with a shortcut button in time mode. Press and hold LIGHT > Quick menu z Keylock z Reminders z Alarm z Time zone z Sleep For further information, see 7. Settings. file://D:\User_manual\CS600\ch07.html 13.11.
8. Training Program PRODUCT NAME Page 1 of 4 MANUAL NAME 8. TRAINING PROGRAM VIEW PROGRAM Create and download a personalized training program to your cycling computer by using Polar ProTrainer 5 software. This chapter includes the basic instructions on how to navigate and manage the program once you have downloaded it to your cycling computer.
8. Training Program z Page 2 of 4 Program off: Remove the program from your cycling computer. To view your daily program Select Program > Week view > Day view Select Today > Exercise view The day view offers an overview of your daily exercises. The white bar represents planned exercise time and the black bar represents performed exercise time. Daily target exercise time is shown below the bars. Press and hold LIGHT to view additional information on the day: z Targets: Summary of targets for the day.
8. Training Program Page 3 of 4 Select Program > Week view > Day view > Exercise view > OK > OK For further information on exercise recording, see Start Training. Your cycling computer will guide you through the session. Exercise with Phases Below is an example of an interval exercise, which is divided into four phases: Warm up / P1: Cycle 15 minutes at a heart rate between 60-70% of your maximum heart rate. Interval / P2: Cycle 5 km at a heart rate between 80-90% of your maximum heart rate.
8. Training Program Page 4 of 4 The cycling computer enters Free exercise mode, and you can continue exercising without settings. The exercise is recorded and filed. For further information on planning the sessions and transferring them to your cycling computer with the Polar ProTrainer 5 software, consult software help. Functions During Exercise Change the same settings in a programmed exercise as with any other exercise type.
9. Tests PRODUCT NAME Page 1 of 8 MANUAL NAME 9. TESTS POLAR FITNESS TEST™ Select Test > Fitness The Polar Fitness Test™ is an easy, safe, and quick way to measure your aerobic (cardiovascular) fitness at rest. The result, Polar OwnIndex, is comparable to maximal oxygen uptake (VO2max), which is commonly used to evaluate aerobic fitness. Your long-term level of physical activity, heart rate, heart rate variability at rest, gender, age, height, and body weight all influence OwnIndex.
9. Tests Page 2 of 8 z Avoid heavy physical exertion, alcohol, and pharmacological stimulants on the test day and the previous day. z You should be relaxed and calm. Lie down and relax for 1-3 minutes before starting the test. Before the Test Wear the Transmitter For further information, see Wear the Transmitter.
9. Tests Page 3 of 8 class from the OwnIndex result. Your OwnIndex value is saved only to the Fitness Test Trend menu only. For further information, see Fitness Test Trend. Update to HR max? (if HRmax-p(if HRmax-p is on) is displayed. z Select Yes to save the value to your user settings. z Select No if you know your laboratory-measured HRmax. Stop the test at any time by pressing STOP. Fitness Test canceled is displayed for a few seconds.
9. Tests Page 4 of 8 40-44 < 22 22-25 26-29 30-33 34-37 38-41 > 41 45-49 < 21 21-23 24-27 28-31 32-35 36-38 > 38 50-54 < 19 19-22 23-25 26-29 30-32 33-36 > 36 55-59 < 18 18-20 21-23 24-27 28-30 31-33 > 33 60-65 < 16 16-18 19-21 22-24 25-27 28-30 > 30 The classification is based on a literature review of 62 studies where VO2max was measured directly in healthy adult subjects in the USA, Canada and 7 European countries. Reference: Shvartz E, Reibold RC.
9. Tests Page 5 of 8 inadequate recovery period, you may experience a decrease in performance as a result of high training volumes, instead of improvement. Polar OwnOptimizer is an easy and reliable way to determine whether your training program is optimally developing your performance. Polar OwnOptimizer is developed for use by healthy adults. Polar OwnOptimizer is a modification of a traditional orthostatic overtraining test.
9. Tests z Page 6 of 8 Avoid eating, drinking and smoking 2-3 hours prior to the test. Performing the Test Select Test > Optimizer > Start > Optimizer Lie Down Arrows indicate the test is ongoing. Do not move during this first part of the test, which lasts 3 minutes. After 3 minutes, the cycling computer will beep and Optimizer Stand up is displayed. Stand up and remain standing still for 3 minutes. After 3 minutes, the cycling computer will beep again and the test is finished.
9. Tests Page 7 of 8 Steady State (4) Your heart rate has continuously been at a normal level for a long time now. Effective training requires both heavy training and good recovery, and this should cause variation in your heart rate results. Your OwnOptimizer result indicates that you have not had very intensive training or good recovery for a while. Perform the test again after a rest or light training day. If the recovery is effective, your result should show Good recovery.
9. Tests Page 8 of 8 comfortable with. Monitor your recovery by performing the OwnOptimizer Test 2–3 times a week. Once you feel you have recovered your balance, and your result shows Normal State or Good recovery, preferably more than once, you can then consider resuming training. Once you start training again, begin a new testing period with new baseline measurements.
10. Using a New Accessory Page 1 of 3 PRODUCT NAME MANUAL NAME 10. USING A NEW ACCESSORY TEACHING Your CS600 cycling computer has been synchronized, or “taught” to work together with the Polar WearLink W.I.N.D. transmitter and to measure heart rate, speed and distance. In other words, your cycling computer receives signals from your transmitter and speed sensor only, and enables disturbance-free exercise in a group.
10. Using a New Accessory Page 2 of 3 If you haven’t taught speed sensor to recognize a certain bike before, speed information will not be shown. Select > Off and the display returns to the previous menu display. To return to time mode, press and hold the BACK button. Once the speed sensor is taught to recognize the cycling computer, it will do so even if the sensor has been turned off. When the speed sensor is turned back on Teach new sensor? is displayed.
10. Using a New Accessory Page 3 of 3 Yes is selected, the cycling computer goes into teaching mode. *Optional sensors required file://D:\User_manual\CS600\ch10.html 13.11.
11. Backround Information Page 1 of 6 PRODUCT NAME MANUAL NAME 11. BACKROUND INFORMATION POLAR SPORT ZONES Polar sport zones offer a new level of effectiveness in heart rate-based training. Training is divided into five sport zones based on percentages of your maximum heart rate. With sport zones, you can easily select and monitor training intensities and follow Polar’s sport zones-based training programs.
11. Backround Information Page 2 of 6 HRmax = Maximum heart rate (220-age).Example: 30 years old, 220–30=190 bpm. Cycling in sport zone 1 (Very light) is done at very low intensity. The main training principle is that performance level improves after training during the recovery period, not only during training. You can accelerate your recovery process with very light intensity training. Sport zone 2 (Light) is for endurance training, an essential part of any training program.
11. Backround Information Page 3 of 6 target zone for that particular type of exercise and day. For more information on how to determine your OwnZone see Determine Your OwnZone. MAXIMUM HEART RATE Maximum heart rate (HRmax) is the highest number of heartbeats per minute (bpm) during maximum physical exertion. It is individual and depends on age, hereditary factors, and fitness level. It may also vary for different types of sports. HRmax is used to express exercise intensity.
11. Backround Information Page 4 of 6 HEART RATE VALUE IN A SITTING POSITION HRsit is your average heart rate when completely still (i.e. while sitting). To easily determine HRsit, wear your transmitter, sit down, and do not engage in any physical activity. For a more precise measurement, repeat the procedure several times and calculate your average. HEART RATE RESERVE Heart rate reserve (HRR) is the difference between maximum heart rate (HRmax), and resting heart rate (HRrest)*.
11. Backround Information Page 5 of 6 HRV indicates the fluctuations of heart rate around an average heart rate. An average heart rate of 60 beats per minute (bpm) does not mean that the interval between successive heartbeats would be exactly 1.0 sec, instead they may fluctuate/vary from 0.5 sec up to 2.0 sec. HRV is affected by aerobic fitness. HRV of a well-conditioned heart is generally large at rest. Other factors that affect HRV are age, genetics, body position, time of day, and health status.
11. Backround Information Page 6 of 6 file://D:\User_manual\CS600\ch11.html 13.11.
12. Customer Service Information PRODUCT NAME Page 1 of 10 MANUAL NAME 12. CUSTOMER SERVICE INFORMATION CARE AND MAINTENANCE Like any electronic device, the Polar cycling computer should be treated with care. The suggestions below will help you fulfill guarantee obligations and enjoy this product for many years to come. Caring of Your Product Detach the transmitter connector from the strap after use. Clean the connector with a mild soap and water solution. Dry it with a towel.
12. Customer Service Information Page 2 of 10 Have the battery replaced by an authorized Polar Service Center. Avoid opening the sealed battery cover, but if you choose to change the battery yourself, follow the instructions carefully on the next page. To change the batteries of the cycling computer and transmitter yourself, carefully follow the instructions in Changing Cycling Computer Battery. Instructions apply for all batteries.
12. Customer Service Information Page 3 of 10 sensor after replacing the battery. Power Output Sensor Battery See the separate Power Output W.I.N.D. Sensor user manual for instructions on how to change the battery.
12. Customer Service Information Page 4 of 10 z Do you have a history of breathing problems? z Are you recovering from a serious illness or medical treatment? z Do you use a pacemaker or other implanted electronic device? z Do you smoke? z Are you pregnant? Note that in addition to exercise intensity, medications for heart conditions, blood pressure, psychological conditions, asthma, breathing, etc., as well as some energy drinks, alcohol, and nicotine may also affect heart rate.
12. Customer Service Information Page 5 of 10 Cycling computer limit values Maximum files: 99 Maximum time: 99 h 59 min 59 s Maximum laps: 99 Total distance: 999 999 km / 621370 mi Total duration: 9999h 59min 59s Total calories: 999 999 kcal Total exercise count: 9999 Total ascent: 304795 m / 999980 ft Transmitter Battery life ofWearLink W.I.N.D.transmitter: Average 2 years (3h/day, 7days/week) Battery type: CR2025 Battery sealing ring: O-ring 20.0 x 1.
12. Customer Service Information Water resistant x Water resistant 50m x x Water resistant 100m x x Page 6 of 10 Splashes, raindrops etc. Minimum for bathing and swimming*. x For frequent use in water but not SCUBA diving. *These characteristics also apply to Polar WearLink W.I.N.D. transmitters marked Water resistant 30m. FREQUENTLY ASKED QUESTIONS What should I do if... ...
12. Customer Service Information Page 7 of 10 z Make sure the textile electrodes in the sports apparel fit snugly. z Make sure that the electrodes of the transmitter / sports apparel are moistened. z Make sure the transmitter / sports apparel is clean. z Make sure that there is no other heart rate transmitter within 40 m/131 ft. z Strong electromagnetic signals can cause erratic readings. For further information, see Precautions.
12. Customer Service Information Page 8 of 10 For further information, consult Speed Sensor W.I.N.D. user manual. …Check Power! is displayed?* Check that the power sensor function is activated in the cycling computer. If so, the cyclist symbol should be displayed on the computer. Make sure your power sensor is positioned correctly.The battery of your power sensor may be empty. For further information, see Power Output user manual. ...
12. Customer Service Information z Page 9 of 10 The guarantee does not cover any damage/s, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the product. During the guarantee period, the product will be either repaired or replaced at an authorized Service Center free of charge.
12. Customer Service Information Page 10 of 10 FI114202, US 6537227, FI110915, FI 113614. Other patents pending. file://D:\User_manual\CS600\ch12.html 13.11.
Italiano 19531175.00 GEN A Questo prodotto è conforme alla Direttiva 1999/5/EC. La Dichiarazione di conformità rilevante è visionabile sul sito Web: www.support. polar.fi/declaration_of_conformity.html. Español Este producto cumple con la Directiva 1999/5/EC. La Declaración de conformidad correspondiente está disponible en www. support.polar.fi/declaration_of_conformity.html. Português English This product is compliant with the Directive 1999/5/EC.
USA FCC regulatory information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.