Installation Guide

POJJO

I n c ◦ 18208 Preston Rd. #D9-136 ◦ Dallas TX 75252 ◦ (p ) 214.937.3511 ◦ (f) 214.227.2017 ◦(e) sales@pojjo.com ◦

www.pojjo.com

VVS - Ideal Cabinet Modifications

The Opening

1) Round the inside and outside edge of the cabinet

opening

2) Bevel the bottom style to allow more room to the

opening

3) Create an opening with a 5+" height (the greater

the h ei ght, th e ea si er it i s to access and return tools )

The Panel

1) Make sure the inside surface of the panel is flat

• If panel has an inlay depression,

cut 3/4" wood to fill gap and stain

2) Place knobs in a diagonal fashion, with Velcro

mal e s ecti on between:

• 24" wide opening required to wrap

4 cords

PAGE 1
VVS - Ideal Cabinet Modifications The Opening The Panel 1) Round the inside and outside edge of the cabinet 1) Make sure the inside surface of the panel is flat opening • If panel has an inlay depression, cut 3/4" wood to fill gap and stain 2) Bevel the bottom style to allow more room to the opening 2) Place knobs in a diagonal fashion, with Velcro male section between: • 24" wide opening required to wrap 4 cords 3) Create an opening with a 5+" height (the gr eater the height, the easier it is to
PAGE 2
• 21" wide opening required to wrap 3 cords If panel height is less than 5" consider the following configuration: • 18" wide opening required to wrap 2 cords POJJO® Inc ◦ 18208 Preston Rd. #D9-136 ◦ Dallas TX 75252 ◦ (p) 214.937.3511 ◦ (f) 214.227.2017 ◦(e) sales@pojjo.com ◦ www.pojjo.