User Manual

Point Six, Inc. – 161 Prosperous Place - Lexington, KY – 40509 - http://www.pointsix.com - 859-266-3606 – Fax: [phone]
FCC ID: M5ZTMPC
Installation and Operation Instructions for the IR Point Sensor
Point Six, Inc.
3003-01 IR Point Sensor
Installation and Operation Instructions
Description
The 3003-01 IR Point Sensor is a battery operated infrared beam People Counter with a 418 MHz radio transmitter.
The sensor consists of two parts; the IR transmitter and the IR receiver. The IR receiver has an integrated 6-digit
LCD counter and a radio transmitter for truly wireless installation and operation. The IR transmitter produces 16
pulses of high intensity IR each second across a distance of up to 25 feet. The nature of these IR pulses is such that
the IR receiver can distinguish them from any other source of IR. This characteristic allows the IR sensor to operate
in almost any environment without interference from ambient lighting.
The IR Point Sensor is designed to require very little energy; the internal 3.6 Volt Lithium batteries will operate the IR
counters for up to 2.5 years in normal operation.
The service switch on the IR People provides several user functions. A momentary press of the service button on the
IR People will turn the display on to allow reading the counts. Pressing and holding the service button on the IR
People will reset the counts to zero. Pressing and holding the service button for 8 seconds will reset the battery fuel
gauge.
The IR Transmitter and IR Receiver are powered on by an On/Off switch. There is an additional switch that allows the
user to the put IR Point Sensor in either front-firing or side-firing mode of operation.