PM5 User Manual PM5 (Bluetooth Barcode reader) User Manual PM5 is Bluetooth barcode reader which has 2D Scanner and single ring trigger. User should pair PM5 with device what has a Bluetooth. Then they can check a data, adjust settings and so on. 1. Major Parts. 1) PM5 terminal ① Scan Key ② Battery locker ③ LED light 1 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual 2) Single Trigger ① Scan key ② Pin for locking PM5 ③ Finger Ring Strap PM5 can connect with single trigger. Single trigger has a finger strap so user can put PM5 on their finger. 2 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual 2. How to Charge User can charge PM5 with USB-C Adaptor Charging ONLY USB C connector 3 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual 3. PM5 Battery Specification Standard Battery 510mAh / 3.8V Extended Battery 700mAh / 3.8V urn On/Off P M550 Getting Started 3. 4. Turn on / Off 1) Turn On ① Put the battery in PM5 ② Push Scan key. Then you can check red LED light from bottom side and beep sound. 2) Turn Off Remove the battery in PM5. 5. Pairing User can use app “RingControl” in their phone for pairing and setting of PM5. RingControl 4 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual For pairing with PM5 and other device, User should read barcode in App. Reading the barcode in the app via PM5 5 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual From the next time, the list your device in it shows up. Pop-up shows when pairing is a success. User can choose the device from it for pairing. 6 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual 6. Scan & Setting Learning the basics After pairing, user can use scan function. User can adjust the setting such as beep volume or FW update from setting button 7 © 2006 – 2020 POINTMOBILE Co., Ltd.
PM5 User Manual FCC & IC APPROVAL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.