User Manual HARVEY M5 rhythmic equipment M5
Please read the precautions carefully before use, or follow the instructions of the customer service personnel. M5 can help you to achieve your goals and promote good health through whole-body vibration. Please understand our company will not assume any responsibility if you do not follow the instructions of the manual. It is forbidden to use it in any way other than that required in this manual.
Operating instructions Contraindication: Pregnant women and women 1 month before pregnancy or 1 month after delivery, people with broken or unhealed wounds, and people who take rest under medical advice and children under 6 years old.
•Suggestions for vibration exercise: Start at level 1 and work your way up to the level where you are most comfortable for vibration exercise. Precautions for the use of whole body vertical vibrator: 1. Read the product instruction carefully before using this product. 2. The children and the elderly should be accompanied and assisted by adults when using this product to avoid being used alone. 3. This product is limited to indoor use and should be avoided damp or dusty environment.
Specification of the product: Item Description Name of the product HARVEY M5 rhythmic equipment Model M5 Voltage AC120V，60Hz Power 1HP Dimension W 750 * L 785 * H 182mm Frequency 3~10Hz Amplitude 5mm Weight 80 kg Load 180 kg Type of mode 1 manual mode, 8 intelligent modes Time of mode Manual mode 15-60 minutes, intelligent mode 15-20 minutes Exercise level 1~8 G value 0.09 0.16 0.25 0.36 0.49 0.64 0.82 1.01 Attention: 1.
Product installation guidance: Fig. ① consists of 4 components: "control panel, handrail, support pipe, and base", the connecting parts have certain distance between each other; The "Line Connection Diagram" is displayed at the connecting parts, and the name of the connecting line connection is marked.
Open the outer package of the product and place the four components of the product (control panel, handrail, support pipe and base), installation kit and power cord on the position where the instrument is installed. Step 1: Make sure the base is placed smoothly on the level ground. Adjust the bolts of the base support to keep the product for safe use. (Note: the product must be adjusted to the level before use. If the product is moved, it should be adjusted again.
（2）Mode display （2-1）Heart rate display (display when holding the sensor) （3）Code activation prompt (it’s not displayed after activation) （4）Display of vibration level （5）Vibration G value （6）Calorie display （7）Time display Button area: （8）Mode selection button, PROGRAM (Manual mode/intelligent mode, press STOP to pause before switching mode)) （9）Up-vibration level increased, DOWN-vibration level decreased (only available in manual mode!) （10）Start button: START （11）Time selection button: TIME (only availab
3. Generally, the data accuracy of heart rate sensor is higher when the hands are held firmly for 3-5 seconds and the data fluctuation is stable. Warranty policy: 1、The warranty period of the product in normal use is 12 months. 2、When applying for warranty, purchase voucher and instruction manual of the product should be provided. 3、The warranty period of the product shall be subject to the date of purchase voucher or the date of activation.
