Data Sheet

biosignalsplux
User Manual
!
!
!
92!of!159!
!
4.2.2 Multi Sync Splitter
Figure 81: Multi sync splitter.
The multi sync splitter accessory meets your multi-device acquisition needs. By using
digital synchronization cable(s), this accessory allows you to connect biosignalsplux
devices with digital ports together to collect up to 24 channels at the same time (by
connecting up to 3 HUBs together).
How to connect your accessory to your biosignalsplux
The multi sync splitter needs to be connected to the digital port of one of the devices
that are being used for the multi-device acquisition (see 2.3.4 Digital Port). When done,
link the other device(s) with the multi sync splitter by connecting digital synchronization
cable(s) (see 4.2.1 Digital Synchronization Cable) to the digital port(s) of the other
biosignalsplux devices and to the one of the three available inputs of the multi sync
splitter.
How to configure synchronized acquisitions in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select one of the devices you want
to use for the multi-device acquisition. In the device’s panel, click on the circle next to
SYNC to turn on (blue circle) or off (empty circle) the synchronization function to
synchronize the acquisition of your devices (see Figure 82). This function must be active
to ensure synchronized multi-device acquisitions without signal drifts. Repeat this step
for all devices that are used for signal acquisition.