SecureScan Series X200 Installation
Trademarks © 2020 Plustek Inc. All rights are reserved. No portion of this document may be reproduced without permission. All trademarks and brand names mentioned in this publication are property of their respective owners.
Table of Contents INTRODUCTION.........................................................................................................1 How to Use This Guide..............................................................................................1 A Note about Icons.............................................................................................................. 2 Safety Precautions....................................................................................................
Introduction Thank you for choosing us as your scanner supplier. Your new scanner will improve the professionalism of your day-to-day computing tasks by allowing you to input images and electronic text into your computer system. Like all of our products, your new scanner is thoroughly tested and backed by our reputation for unsurpassed dependability and customer satisfaction. We hope you will continue to turn to us for additional quality products as your computing needs and interests grow.
A Note about Icons This guide uses the following icons to point out information that deserves special attention. Warning Attention A procedure that must be followed carefully to prevent injury, or accidents. Instructions that are important to remember and may prevent mistakes. Optional tips for your reference. Information Safety Precautions Before using this device, please read the following important information to eliminate or reduce any possibility of causing damage and personal injury. 1.
System Requirements1 PC with Intel Pentium®IV 2.4GHz processor or higher 1GB RAM (2GB RAM Recommended) Available USB 2.0 port CD-ROM Drive or DVD-ROM Drive 1GB Free Hard Disk Space (2GB Recommended) Operating System: Windows 7 / 8 / 8.1 / 10 Box Contents2 X200 1. Scanner 2. Scanner Cover 3. USB Cable 4. AC Adapter 5. Quick Guide 6. Setup/Application CD-ROM Higher requirements might be needed when scanning or editing a large quantity of image data.
Scanner Overview X200 1. Status indicator: Indicates the scanner’s ready status. 2. LED indicator: Indicates the scanner’s power status. Light Status On The scanner is turned on, ready to scan images. Off The scanner is off, either because the power is not turned on, or because the power cord is not properly plugged into an AC power outlet.
3. Power Switch: Use this to turn the scanner ON or OFF. 4. Power Receptor: Connects the scanner to a standard AC power outlet by the AC adapter included. 5. USB Port: Connects the scanner to a USB port on your computer by the included USB cable. 6. USB Hub: Connects a desired USB peripheral. 7. USB Hub: Connects a desired USB peripheral.
Installing the Scanner Before installing your scanner, please verify that you have all of the proper components. A list of the package contents is provided in the Box Contents section of this guide. Hardware Requirements This scanner connects to your computer through the Universal Serial Bus (USB), which supports hot swap. To determine whether your computer is USB-capable, you must check the rear of your PC to locate a USB jack that looks the same as the one pictured below.
Setting up the Scanner Please follow the step-by-step procedures described below to install the scanner. X200 1. Plug the AC adapter into the scanner’s power receptor. 2. Plug the other end of the power cable into a standard AC power outlet. 3. Plug the square end of the included USB cable to the USB port at the rear of the scanner. 4. Plug the rectangular end of the USB cable to an available USB port on your computer. 5.
Appendix A: Specifications4 Plustek SecureScan X200 Image Sensor CMOS Light Source White LED / IR LED / UV LED Optical Resolution 5 Megapixels Output Resolution 300, 500, 600 DPI Focus Fixed Scan Modes Color: 24-bit Input; 24-bit Output IR: 24-bit Input; 8-bit Output UV: 24-bit Input; 24-bit Output Contactless RFID (Frequency 13.56MHz) - ICAO recommendations in ICAO Doc 9303 supplement, LDS 1.7 - ISO 14443 Type-A and Type-B - PA, AA, BAC, EAC (V1.11) Scanning Speed Approx.
Appendix B: Customer Service and Warranty Visit our website www.plustek.com for more customer service information. For further assistance call our customer support phone number listed on the website. One of our representatives will be happy to assist you from Monday through Friday during office working hours as shown below: Europe 9:00 a.m. – 5:30 p.m. (CET) Other Countries or Areas 9:00 a.m. – 6:00 p.m.
Statement of Limited Warranty This Statement of Limited Warranty applies only to the options you originally purchase for your use, and not for resale, from an authorized reseller. The manufacturer warranty includes all parts and labor, and is not valid without the receipt of original purchase. To obtain warranty service, you may contact the authorized dealer or distributor, or visit our website to check out the available service information, or send a request via E-mail for further help.
3. Economic consequential damages (including lost profits or savings) or incidental damages, even if we are informed of their possibility. Some jurisdictions do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction.
