Copyboard with Memory Function M-10S/M-10W User’s Manual Thank you for your purchase of the PLUS Copyboard. Please read this User’s Manual carefully before use to take full advantage of the functions of this product. After you have finished reading the manual, please keep it for future reference.
This User’s Manual covers both models M-10S and M-10W. The copyboard is available in a standard size (model M-10S) and a wide size (model M-10W). A printer and stand may be available as options depending on the product you purchase. Descriptions and diagrams refer to model M-10S. * Model names will be given where model-specific functions or operations are concerned. Trademarks • Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation.
TABLE OF CONTENTS Features ......................................................................................................................................... E-4 Safety Precautions Warnings and Precautions ......................................................................................................................... E-5 Care and Cleaning .....................................................................................................................................
FEATURES Functional and Stylish The M-10 appears in a new, stylish design. The operation controls such as control panel, memory card slot, printer, and other parts have all been positioned at the right side to make ease of use consistent with the clear-cut design. The height of the copyboard can be adjusted 3 levels above and below the standard position. In comparison with our series of products up until now (i.e.
IMPORTANT SAFETY INFORMATION WARNING The unit’s rear panel should never be opened by anyone other than a qualified serviceperson. There are many high voltage parts inside the unit, and touching them is dangerous. For replacement of the light source’s fluorescent bulb, internal inspections, adjustments, repairs or internal cleaning, please contact your store of purchase.
CARE AND CLEANING Installation • For stand type units, be sure to lock the casters. • When mounting on a wall, be sure to check first that the wall surface is strong enough to support the total weight of the main unit, mount fittings and printer over a long period of time (including during earthquakes). If the wall is not strong enough, reinforce it before mounting the unit. • Getting water on or inside the unit etc., could lead to fire or electric shock.
PACKAGE CONTENTS The package contents are as described below. Please check before use. Copyboard, main unit ......... 1 See “Assembly and Setup Manual” for information about the assembly parts of the copyboard. Printer* ......... 1 Please see the instruction manual of the printer for information about the printer accessories. Stand* ........... 1 *The printer and stand may be sold separately.
NAMES OF THE PARTS Copyboard Front Copyboard Sheet Special markers are used on the sheet to draw diagrams and to write. Card slot A CompactFlash card is inserted here. Control panel Dust tray Printer tray The printer* is placed here. Stand* This stand supports the copyboard. Effective reading size The copyboard cannot read the indicated border portion of the sheet surface when copying. Please write within the effective reading area. approx. 35mm approx. 30mm approx.
Copyboard Rear Printer connector Connect this with the USB connector of the printer. (The printer connector is dedicated for use with a printer; use it only with a printer.) Some models have the AC OUTPUT connector depending on the country of destination. The connector is located on the bottom surface of the copyboard. The diagram view is seen from the bottom. AC input connector This connector supplies power to the copyboard. Make a connection between this and an AC wall power outlet.
Copyboard Control Panel 4 + / – buttons (Number of copies) Pressing the + button or the – button sets the number of copies to be printed (to a maximum of 20 sheets). The number of copies appears in the display window. 5 5 Display window 4 13 6 Cancel OK COPY 6 COPY button (Print) MEMORY REPEAT Moves a one-screen portion of sheet and reads it, then prints the number of copies displayed in the display window.
OPERATION STEPS The copyboard uses a CCD image sensor to read the diagrams and writing made with the special (four color) markers and prints this at reduced size with a printer that is connected to the copyboard. A press of the COPY button or MEMORY button scrolls the surface and reads it, accumulating the image data in internal memory. A press of the COPY button outputs the image data to the printer, whereas a press of the MEMORY button outputs the data to a memory card.
PRINTING This function prints the sheet screen of the copyboard on the printer connected to the copyboard. BASIC PRINTING OPERATION Preparation: 1. Set A4 or letter size paper in the printer. See Page E-19. 2. Switch on the printer power. See Page E-19. Press the POWER button and switch on the power. POWER Cancel OK COPY Note When the POWER button is pressed and the power is turned on, the LED on the display shows a countdown of approximately 25 seconds, then the LED stops flashing, remaining lit.
Press the + button or the - button and select the number of copies. Selecting the printing density Select this when the density of the print is light. Press the Density button and select darker or standard. Density Density indicator Lit ..... Darker Unlit .. Standard • When the power is switched on, one copy is selected. • A maximum of 20 copies can be set and the number of copies is displayed in the display window.
Cancellation of the print operation in progress During the read operation (when the COPY button was pressed) A press of the FEED/STOP button will stop the sheet during the reading operation and print the image data that has been read up to then. Please wait until the paper has been ejected from the printer.
USING COMPACTFLASH CARDS Use of a CompactFlash card (hereafter abbreviated as a memory card) permits the sheet surface to be stored as image data. The stored data can be read by a personal computer and used to make a meeting record, or can be pasted in a document. • Items Required for Using the Memory Function CompactFlash card: TYPE 1 or TYPE 2 (Optional items), or commercially available items. (Please use products bearing the CF logo.
Press the COLOR button and select Color or Black & White. COLOR COLOR lamp Lit ......... Memory storage will be in color. Unlit ...... Memory storage will be in black & white. • At first, when the power is switched on, black & white is selected. Press the MEMORY button to store Sequential flashing during memory storage MEMORY Display window • The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and memory storage starts after the scrolling completes.
EXAMPLES OF PLAYBACK OF COMPACTFLASH CARDS WITH A PERSONAL COMPUTER This example shows how the data held in the memory card is copied to the hard disk of a personal computer, and deleted from the card. Methods include the use of Explorer and various other methods. Please see the instruction manual of your personal computer or the software being used for information about using your personal computer. The folder name of the memory card is PVW. The image file name inside the folder is MBxxxxxx.
DELETING ALL OF THE MEMORY CARD DATA WITH THE COPYBOARD When the memory card has become full, copy the required image data on the hard disk of a personal computer or on another medium and then insert the card into the card slot of the copyboard and perform the deleting operation. All of the image data stored in the PVW folder will be deleted. To delete using a personal computer, please see Page E-17. Press the POWER button and switch on the power.
PRINTER OPERATION GUIDE A printer is used to print out the drawn sheet surface. Depending on the printer, the operation may differ and the names of the parts may be different. Please see your printer instruction manual for details. PRINTER SET UP Please check that the copyboard and the printer have been connected. See Page E-23. Set the paper. Please use A4 or letter size printer paper. See your printer instruction manual for details. 1) Arrange the paper edges so that they are even.
MEANING OF ERROR MESSAGES If any of the following flashing indications appear in the display window of the control panel, please check the matters described below. The flashing will continue for 5 seconds.
TROUBLESHOOTING Please check the following matters before making a request for servicing. CopyBoard Related Condition Please Check Pressing the POWER button does not switch on the power. • Check that the power cable is securely plugged into the power outlet. Writing on the sheet is not erased with the eraser. • Was a marker other than a special marker used? (Moisten a cloth with water or neutral detergent, wring well, and wipe carefully.
SPECIFICATIONS MODEL NAME BOARD M-10S M-10W Panel Size 920 (H) x 1300 (W) mm 920 (H) x 1800 (W) mm Copy Area 850 (H) x 1240 (W) mm 850 (H) x 1740 (W) mm Number of Pages 2 Paging Motorized (Forward) & Manual (Forward & Reverse) Grid Line 50 x 50 mm Image Sensor CCD Optical Sensor PRINTER Type of printer Inkjet (HP PCL Level 3 Compatible) *1 (Optional) Paper Plain Paper, A4-size/ Letter-size Colors 4-color (Black, Red, Blue, Green) or Black Interface MEMORY CONTROL PANEL USB 1.
APPENDIX CONNECTIONS BETWEEN THE COPYBOARD AND PRINTER The installation method at the printer side will differ depending on your printer. (1) Connect the printer connector of the copyboard with the USB connector of the printer using the supplied USB cable. (2) Plug the power cable that was supplied with the printer into a wall outlet. (3) Connect the AC INPUT connector of the copyboard with a wall power outlet using the power cable supplied with the copyboard.
CHANGING THE HEIGHT OF THE UNIT This is the height adjustment when setting up the copyboard on the optional stand. The stand height can be adjusted to 3 levels in 100 mm units. CAUTION! Please have 2 or more persons hold the unit. If the unit is dropped or falls over, this could cause unexpected injury. Please lock the casters by pushing the lower portion of the lock button. (1) Disconnect the power cable and all other connection lines. (2) Take out the printer and remove the printer tray.
QUICK CALIBRATION PROCEDURE The following describes the procedures to adjust (calibrate) for the optimum reading sensitivity of the copyboard. Perform the quick calibration procedures described below if ruled lines appear after the fluorescent bulb is replaced or when the copyboard is mounted on a wall, etc. Note Depending on your copyboard (M-10), it may be necessary to update the program.