Model: 1104 Tag User’s Manual (RFID) Tracking System DRAFT 2 PLUS Location Systems Cummings Research Park 4955 Corporate Drive, Suite 101 Huntsville, AL 35805 USA www.PLUS-LS.com Tel: +1.256.217.4072 Fax: +1.256.922.
PLUS Tag User’s Manual DRAFT May 2012 Nondisclosure Provisions This manual contains PLUS Location Systems (PLUS) Proprietary Information. Purchasers of this device are reminded of their obligation to protect PLUS confidential and proprietary information in accordance with the Terms and Conditions (T&C) of sale. Rights Rights to use this documentation are set forth in the Terms and Conditions accompanying the PLUS hardware. Regulatory Notice U.S. Operation.
DRAFT PLUS Tag User’s Manual 3 -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
PLUS Tag User’s Manual DRAFT Table of Contents 1. INTRODUCTION ................................................................................................................... 65 2. OVERVIEW ........................................................................................................................... 65 3. SPECIFICATIONS................................................................................................................. 86 4. BEAM ORIENTATION RECOMMENDATIONS ..........
PLUS Tag User’s Manual 5 DRAFT Active Change Record Version Comments Release Date Rev X Draft release 3/22/07 Proprietary Information: Do not disclose unless authorized under a Nondisclosure Agreement and/or the Terms and Conditions signed at time of purchase
PLUS Tag User’s Manual DRAFT 1. Introduction The 1104 Personnel Name Tag is a small, active RFID tag that works as part of a PLUS Real Time Location System. The tag consists of a circuit board with integrated antenna, coin cell battery, and plastic enclosure. The tag is designed to support attachment of a CR80 format ID badge. The tag is worn on a lanyard or clip to enable location information for personnel. 2.
DRAFT PLUS Tag User’s Manual 7 The pulse characteristics are determined only by the drive circuit and are not a function of the 1 MHz PRF. This direct signal generation approach does not use an intermediate frequency and up-conversion approach. The tag signaling only consists of an OOK modulated 1 MHz pulse train and does not use channel coding, frequency hopping, or other channelization techniques. All signal shaping is implemented in the hardware circuit described above.
PLUS Tag User’s Manual 3. Specifications The 1104 Tag specifications are listed below. Function: Battery Life: Range: Dimensions: Weight: Temperature: FCC ID: RF Emissions: Transmits RF packets 3 Years at 6 Hz Packet Rate 130' typical line of sight 2.28" W x 0.13" D x 3.53" T 90 oz (25.5g) Operating: -4deg F to 131deg F Storage: -22deg F to 140deg F ZEH0412 FCC 15.250 compliant 4.
DRAFT PLUS Tag User’s Manual 9 Warranty Statement and Return Policy WARRANTY PERIOD: Subject to the limitations herein, the warranty period for hardware product to which this warranty applies shall be for one (1) year from the date PLUS Location Systems USA LLC (“PLS”) delivers the product to the shipping carrier.
PLUS Tag User’s Manual DRAFT ninety (90) day period for in-warranty or out-of warranty repair covers only the actual repair(s) made to the item and is exclusive of potential non-related faults that may occur during the ninety (90) day period. WARRANTY RESTRICTIONS: Modification or alteration to purchased item by Buyer, other than that specifically authorized in writing by PLS, shall VOID AND NULLIFY, in its entirety, all warranty rights as set forth in Warranty paragraph above.
PLUS Tag User’s Manual DRAFT 11 Any charges should be verified by the Buyer at time of RMA issuance prior to returning the item. Out-ofwarranty repairs will be made at a nominal cost based, in part, on the selling price of the product. For information regarding item currently in-house or possible fees associated with repair, contact Technical Support at +1.256.217.4072 and please select option 3.