User's Manual

ManualsBrandsPlugwise ManualsElectronicsPlugwise Circle Plus

Contents of the package

Check the content of your package for the following parts. If a

part is missing, please contact us as soon as possible.

1x Circle+

Plugwise scker at the back

with thick black line at the boom

Circle1x Sck

This manualInstallaon list with

soware license code

license code

Thank you for purchasing this Plugwise kit; the most

advanced system for monitoring and control of your

energy consumpon available today. The system is

managed by Plugwise Source, a soware applicaon that

communicates with the Circles (the smart plugs) via a

ZigBee wireless network.

The installaon process consists of three steps: plugging in the

Circles, installing Source and conguring the system. A detailed

manual for Source will be shown if you click the applicaon’s

queson mark buon.

Installing and conguring your kit can take approximately 45 to 90

minutes.

Windows XP/Vista/7

30 MB free disk space

1 GB memory

1 GHz processor

64 MB graphics card

Internet connecon

System requirements

In order to install Source you need a computer with at least the

following specicaons:

Summary of content (8 pages)

PAGE 1
Thank you for purchasing this Plugwise kit; the most advanced system for monitoring and control of your energy consumption available today. The system is managed by Plugwise Source, a software application that communicates with the Circles (the smart plugs) via a ZigBee wireless network. The installation process consists of three steps: plugging in the Circles, installing Source and configuring the system. A detailed manual for Source will be shown if you click the application’s question mark button.
PAGE 2
1.1.Plaatsing vanCircles de Circles Placing the Circle+ 1 2 ÌÌ Pak de Circle+ (te herkennen aan de grijze achterkant), de meegeleverde installatielijst en een pen. ÌÌ Kies een apparaat in de nabijheid van de computer (niet de computer zelf), dat u op de Circle+ wilt aansluiten en loop naar het apparaat. ÌÌ Op de achterkant van de Circle+ zijn twee stickers met een code bevestigd. Scheur één sticker af en plak deze op de installatielijst. Laat de Circle+ andere sticker zitten.
PAGE 3
detail toegelicht in de Source software-handleiding. U kunt deze bekijken door op het vraagtekenknopje rechts onderin het scherm te klikken. 2. Installing Plugwise Source ÌÌ Aan het eind van het configuratieproces krijgt u een e-mail toegezonden. Plugwise Source is the software application that enables you to view Na het aanklikken van de activatielink in deze e-mail is Source klaar voor energy usage data on your computer. It’s also used to create schedules gebruik.
PAGE 4
. Use tips With Plugwise Source you can measure the energy consumption of each of your appliances and switch the appliances on and off. By sending switching schedules to the Circles you can automatically switch appliances on and off and save on your electricity bill. Your computer can be turned off as energy measurement data and schedules are saved on the Circle’s internal memory. 1 3 1. Reports displays graphs of your energy use, costs and related CO2 emission.
PAGE 5
. Transfer of consumption data By accepting the Plugwise license terms (available at www.plugwise.com) you are allowing the automatic transmission of the measurement data of your appliances to Plugwise. The data will be sent anonymously (unless you indicate otherwise) and are not linked to your location or ID in any way. These technical consumption data are used by Plugwise to improve and extend the functionality of its products with the ultimate goal of a better environment and a sustainable world. 6.
PAGE 6
8. FCC Declarations Compliance statement (part 15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning (part 15.
PAGE 7
9. Technical data Circle Parameters Min. Nominal Max. Unit 120 140 VAC Remarks Power supply Supply voltage 85 Frequency Power dissipation 50 / 60 Hz 0.19 0.9 W 115 VAC, 50 Hz, 77˚F, unloaded 15 A cos phi 1, max. inrush current: 80 A during 10 ms. Output Output current Energy measurements Accuracy (current usage) 5% ± 0.5 W 120V AC, 60 Hz, 73.4˚F, range: 1.035-1800W Accuracy (cumulative) 1% ± 0.
PAGE 8
Getting started with Plugwise Installation manual 200.100.