UP User Guide
Welcome to the PLEVO family www.plevo.
Table of Contents Product 01- Product external parts Removable battery 02- Parts and features 03- Installation 04- Extraction method Removable wheels 05- Installation 06- Dismantling Mobile application and electronic lock 07- Components 08- Electronic lock (Morse code) 09- Electronic lock (Face ID/Touch ID) 10- Digital Scale 11- GPS Airplane mode 12- Activation and disabling method Communication 13-15- Lights and alerts indicators Garment bag System 16- Components 17-19- Operation UP
PRODUCT 1
Outer parts of the suitcase Main handle Button Secondary handle Dashboard Battery access cover Front light indicator Front lock flaps Aluminum frame Frontal logo Rear logo Electronic lock Hinged Side handle Body Support plugs Front cover Wheel holder Removable wheel The images in this manual are illustrative and can vary with actual model.
REMOVABLE BATTERY
Parts and characteristics Characteristics: Our energy bank with lithium-ion battery (8,000 mah) is fully removable from PLEVO baggage. -Dimensions: 85.5 x 84 x 21 mm -Capacity: 8000 Mah/29.6 WH -Input (Micro): 5v/3a 9v/2a -Input (C-type): 5v/3a 9v/2a -type-C output 5v/3a 9v/2a 12v/1.5 A-QC 3.0 output: 5v/3a 9v/2a 12v/1.5 A -USB output: 5v/3a -Total output: 18w MAX Power button Micro USB USB 3.
Installation Picture 1 Open the rubber cover to the right to access the internal compartment of the board . A Picture 2 To install the energy bank, it is necessary to access the "A" cover on the back of Position the battery horizontally and press forward until the mechanism locks and the element is anchored. the board and open it by rotating it downwards. This cover protects internal components from shocks, dust, and water so it is recommended that it is always closed while the battery is not in use.
Extraction method BATTERY BACKUP ! 1 Open the sticky cover to the right to access the battery. Our system has a nickel-ion back-up battery of less than 600mAh and its weight is 39g (2.16 Wh). This battery feeds THE WHOLE suitcase when the removable battery is not installed on it. 2 Press forward slightly until the ejection mechanism is released. 3 Remove the battery horizontally forward, without making any upward or lateral pressure.
REMOVABLE WHEELS
1 Installation B Hold the latch button down and place the wheel bolt into orifice B. A A 2 Make pressure on the wheel until it fully snaps into the orifice. A A To be able to set each of the wheels it is necessary to get access to the four "A" locks placed in the lower part of the suitcase. Follow steps 1-3 to remove the latch and install the wheels. 3 Release the safety button so that the final adjustment is done.
1 Disassembly Hold the button back to release the latch. A A 2 Pull the wheel backwards while holding down the button. A A To remove each one of the wheels, it is necessary to access the four "A" locks located in the lower part of the bag. Follow steps 1-3 to remove the safe and extract the wheels. 3 C The wheel is released once the "C" Bolt is completely out from the orifice.
MOBILE APPLICATION AND ELECTRONIC LOCK
COMPONENTS - Electronic lock Morse code button TSA logo Indicator light Secondary handle TSA Lock Using Travel Sentry Approved lock allows your luggage to be unlocked and inspected by security authorities without damage.
Electronic lock (Morse code) All PLEVO bags have an alternate Morse code closure system that replaces the old padlocks. Only onetime code configuration is required, and it will be ready for use at any time without depending on the battery or mobile phone. B A B Configure the code from our 1 mobile application. You must select 4 digits. Allowed numbers: 1 to 5. For example: 1234. open the bag, it is necessary 2 toTo press the digit button.
Electronic lock (Face ID/Touch ID) It is possible to open or close the bag by means of biometrics by using our mobile application. Depending on the smartphone model used you can choose to use facial recognition or fingerprint. In order to perform this action, it is necessary to follow the steps 1-3 B A B It is necessary to activate the 1 opening method within the application depending on the device used.
Digital scale 1 While holding luggage with handle A, you will be able to view the weight of the baggage using A our mobile device application. Important: Before weighing the bag, it is necessary to start a calibration from the Application. This lasts a few seconds -click on "START TO CALIBRATE"-. The system will then be ready, and the exact weight of the load will be displayed. 2 You will be able to monitor the weight of your baggage on your mobile device through our application.
GPS Available on the ANDROID APP ON The PLEVO UP model features a GPS tracking system that will allow you to locate the bag anywhere by using our mobile device application. In order to use this feature, you need to install the APP on your device, register and link the system with your luggage PLEVO. PLEVO INFINITE ! < New York, United States Select the GPS function icon in the lower bar of our app and slide it to activate the system.
AIRPLANE MODE
How to activate/deactivate airplane mode AIRPLANE MODE Our PLEVO bags are developed using a system of sensors that allow to detect what is happening and adjust the condition of the baggage according to the norms established by the FAA, IATA, DOT & EASA. At the moment the suitcase is placed in horizontal mode the sensors that work with the GPS detect the location and go into airplane mode to completely disable, automatically, all the suitcase functions.
COMMUNICATION
Indicator lights and alerts (electronic lock) Electronic lock Our electronic locks have a light (A) that show the different states of the bag. Can be presented at: CYAN RED FUNCTIONS Morse Code button A Flashing red light each time the Morse code button is pressed. Three flashes when Morse code is incorrectly entered or when an error occurs in the Face ID/Touch ID A slow flash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code.
Indicator lights and alerts (dashboard) The suitcase has a luminous indicator board (B) that communicates the different states of the bag. Can be shown as: CYAN RED Three flashes when Morse code is incorrectly entered or when opening by Face ID/Touch ID fails Red light flashes each time the Morse code button is pressed. B A slow flash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code.
Indicator lights and alerts (frontal panel) The bag has a front light (C) that communicates the closing condition of the bag and the pairing with devices. Can be shown as: CYAN A slow flash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code. ROJO Intermittent flashes in Red and cyan when the bag is finding a device to connect.
GARMENT BAG SYSTEM
Components ! The system, the universal hangers and the suit-rack are included only in our model B Holders A Actuator system Hangers B spouts C Hangers Hooks D UP User Guide 16
Operation COMPACT A DEPLOYED To Deploy the system and access the hangers, press the command buttons inward releasing the latch (Figure 1). Then it will be necessary to slide back the command to finish deploying the system (Figure 2).
Operation -Hangers- ! UNIVERSAL HANGERS Our system has a set of plastic hangers adaptable to different supports. In this way it can be used in both a PLEVO and a standard furniture when the garment is moved. E 1- 2 1 2 To remove a hanger it is necessary to press the E button (Figure 1) and then slide it downwards to make the workpiece unadjusted. 3-4 3 4 Rotate part F (Figure 3) to release the hook that allows the hanger to be held in different types of supports (Figure 4).
Operation In the lower part of the inside of the UP model there are two metal strips of hooks necessary for the anchorage of the trunks.
www.plevo.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
