TM Safety Guide & Assembly Instructions Guide de sécurité et Instructions de montage Directrices de Seguridad e Instrucciones de Construcción PS 73401 Safety Zone Safety Zone Safety Zone PS 73403 PS 73402 We Will Gladly Help! • ¡Le Ayudaremos Con Mucho Gusto! • C’est avec joie que nous vous aiderons! 1-888-PLAYSTAR ( 752- 9782 ) (450) 699-3083 Monday through Friday, 8:00 A.M. to 5:00 P.M. C.S.T. De Lunes a Viernes de 8:00 A.M. a 5:00 P.M. C.S.T. Du lundi au vendredi, de 8 h à 16 h EST www.
SAFETY • This product is intended for single-family residential use only, by children ages two to ten and a maximum weight of 105 pounds. Any recommendation over 10 years of age or 105 pounds exceeds the upper limits specified in the American Society for Testing and Materials (ASTM) Home Playground Safety Standard. In order for PlayStar to comply with the ASTM Standard, we cannot recommend anyone above these limits. • Follow the instructions provided, do not alter its design in any way.
INSTALLATION: 1. Follow the instructions provided, do not alter its design in any way. 2. Place the equipment on level ground, not less than 6' (1.8m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines or electrical wires. If the area where you will be installing your playset is not level, you must make it level. 3. Playsets must be anchored to the ground. Follow the anchoring instructions provided with your building kit.
PS 73401 (2) (1) LT 7000 Playset Anchor FC 3217 (8) (2) 4 FC 3217
PS 73402 (1) (1) (1) LT 7000 (1) (1) (1) Playset Anchor FC 3217 (8) FC 3217 5
PS 73403 (1) (1) LT 7000 Playset Anchor FC 3217 (4) 6 FC 3217
All Design Options HW 1231 HW 1223 (16) #8 x 1Z/v" TRX ³ ₈" x 1" hex bolt HW 1201 (4) C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw #8 x B/," #8 x ⁵ ₈" truss head screw #8 x 1¹ ₄" deck screw HW 1219 (8) (4) C/," x 3" HW 1201 SCREW LAG HDG 3/8 X 3 ³ ₈" x 3" lag screw HW 1528 HW 1411 (8) HW 1301 (8) C/," x 2" HW 1528 BOLT HEX HDG 3/8-16 X 2 #2 T-20 Z/," #3 T-25 Z/v" C/," (28) C/," ³ ₈" washer ³ ₈" lock nut C/," 7
Assembly Process Icon Glossary Place tower or component in desired location. Drill through board at correct location with countersink tool and bit size shown. Drill down the depth shown into board at correct locations using bit size shown. Note: You may use any bracket as a drill template. Mark board with measurement shown for location on this step. Secure screw (flush to top) with bit size shown. Secure hardware with socket/wrench size shown.
Safety Warning Glossary CAUTION: These boards should be pre-drilled and countersunk to avoid cracking. Note: Adjust countersink tool to width of first board to countersink to proper depth. Pre-drill into second board using first board as a template before attaching. CAUTION: Minimum spacing is required from the closest point of all other rides or stationary objects. CAUTION: Use wrench to tighten Quick-Link Connectors. Failure to tighten Quick-Links securely could result in injury.
Helpful Hints Make sure boards remain square. Note: Assembly process should take place on flat surface. This helps with assembly process. Do not..._______. Be sure boards are flush. 0 Z/, Be sure boards/brackets are tight against each other. Be sure boards/components are spaced the distance listed. Be sure to equally space. Be sure boards rest on the ground. Safety Plaque HW 1223 (4) #8 x B/," #8 x ⁵ ₈" truss head screw Place in prominent location on Cliffhanger structure.
Bronze Only (Silver- Skip to Page 12, Gold- Skip to Page 16) ³ ₈" x 1" hex bolt HW 1219 Playset Anchor (4) FCx 3217 ³ ₈" 3" lag screw C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 HW 1301 (4) (4) C/," FC 3217 ³ ₈" washer Alternate anchors on every other wall.
Silver Only (Gold- Skip to Page 16) 1 HW 1301 HW 1411 (4) C/," ³ ₈" lock nut (4) HW 1528 (8) C/," C/," x 2" HW 1528 BOLT HEX HDG 3/8-16 X 2 ³ ₈" washer Bolt heads located on the inside. 2 HW 1231 (4) T-20 #8 x 1Z/v" TRX #8 x 1¹ ₄" deck screw Repeat steps 1 & 2 for second assembly.
3 HW 1231 (8) T-20 #8 x 1Z/v" TRX #8 x 1¹ ₄" deck screw 3Z/x" Repeat process for both frames. 21Z/x" 96" Dig into ground for leg beams.
4 HW 1201 HW 1301 (4) (4) C/," C/," x 3" HW 1201 SCREW LAG HDG 3/8 X 3 ³ ₈" x 3" lag screw ³ ₈" washer Repeat process for both frames.
³ ₈" x 1" hex bolt 5 HW 1219 Playset Anchor (8) ³ ₈" 3" lag screw FCx 3217 C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 HW 1301 (8) (8) C/," FC 3217 ³ ₈" washer Alternate anchors on every other wall.
Gold Only 1 HW 1231 (8) T-20 #8 x 1Z/v" TRX #8 x 1¹ ₄" deck screw 3Z/x" 21Z/x" Be sure boards face opposite directions so the monkey ring chains are staggered.
2 HW 1201 HW 1301 (4) (4) C/," C/," x 3" HW 1201 SCREW LAG HDG 3/8 X 3 ³ ₈" x 3" lag screw ³ ₈" washer 17
³ ₈" x 1" hex bolt 3 HW 1219 Playset Anchor (8) C/," x 1Z/x" HW 1219 SCREW LAG HDG 3/8 X 1 1/2 ³ ₈" x 3" lag screw FC 3217 HW 1301 (8) (8) C/," FC 3217 ³ ₈" washer Alternate anchors on every other wall.
This page left blank intentionally.
Thank you for choosing PlayStar. Because it is our intention to make this a positive family experience, we have taken great care in preparing this product. Do not return to the store. Should you have any questions, or if we can assist you in any way, please call our friendly Customer Service Department for immediate action. Gracias por escoger PlayStar. Es nuestra intención hacer de esto una experiencia familiar positiva, por eso hemos puesto mucho cuidado al preparar este producto.
