TECH-TALK™ TRANSMISSION SHUTTLE COMMANDER INSTRUCTIONS: 1. Install Batteries (not included) into the Shuttle Commander Pack and the transmitter (see Battery installation Instructions). 9 insert the transmitter jack plug into the headset port on your CD player. 3. Turn on your CD player and insert the Real Heroes audio CD, and press play. 4, Turn on your Shuttle Commander's Pack. 5 The audio mission will play through your Shuttle Commander's Pack 6 within a range of approximately 30 feet. .
TO REPLACE TRANSMITTER BATTERIES: 1. Remove screw and battery compartment cover. 2 Insert 4 “AAA” batteries with the polarity as show. 3. Replace screw and battery compartment cover. TO REPLACE SHUTTLE COMMANDER PACK BATTERIES: 1. Remove screw and battery compartment cover. 2. Insert 3 “AAA” batteries with the polarity as show. 3. Replace screw and battery compartment cover. BATTERY REGULATIONS: Do not mix old and new ‘batteries.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following fwo conditions; (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation, WARNING: Changes or modifications to this unit nol expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.