User's Manual

Whilst every precaution has been taken to ensure your safety, every
electrical device should be handled with care at all times. Please follow
these guidelines;
Observe ALL warnings, precautions and instructions
Do not expose to extreme temperatures or direct sunlight for any
length of time. If the Controller becomes too hot to touch, unplug it
(including all cables) immediately and stop use.
Do not get the Controller or any cables wet. If you wish to clean the
device, please do so using a dry cloth. Do not expose to liquids,
chemicals or fluids as these may damage your device.
Use only the cables provided with your device to plug the Controller
into a power source. Using other cables may damage the controller.
Do not open, modify or attempt to tamper with the Controller or
internal battery. Doing so voids the limited warranty and could harm
you or your Controller.
Take care when handling the power supply to avoid electric shock.
If you have an epileptic condition or have had any seizure in the past,
please consult your doctor before playing. We recommend that
parents observe their children while they play video games. If you or
your child experience any of the following symptoms: dizziness,
altered vision, eye or muscle twitching, involuntary movements, loss of
awareness, disorientation, or convulsions, DISCONTINUE USE
IMMEDIATELY and consult your doctor.
Play Safe;
Radio Frequency And Specific Absorption Rate (SAR)
This device complies with the Canada and European Union RF exposure
limit set forth for an uncontrolled environment and is safe for intended
operation as described in this manual. It is intended to be used normally
at a distance of at least 20 cm from the user.
This device meets the U.S. Federal Communications Commission's
(FCC) requirements for exposure to radio waves and is designed and
manufactured not to exceed the FCC's emission limits for exposure to
radiofrequency (RF) energy. The exposure standard for wireless devices
employs a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certified power level
in all tested frequency bands
We are committed to providing our customers with information about the
chemical substances in our products as required to comply with legal
requirements such as RoHS.
The Bluetooth word, mark and logos are all owned by Bluetooth SIG.
Information in this document, including URL and other Internet web site
references, is subject to change without notice.
©2015 Flare Llc. All rights reserved
www.flareplay.com
Warnings
Children should be supervised whilst playing games and parents are
encouraged to monitor children in online activities to ensure safe and
responsible internet usage.
All users should take regular breaks
Don’t sit or stand too close to the screen
Play in a well-lit room
Stop playing if you feel drowsy, fatigued or in any way unwell
To satisfy FCC eequi
tion. Ope
men
The antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
Legal Notices
For warranty information please visit
www.flareplay.com/hardware/warranty
flarePlay and third-party software licenses and end user Notices can be
found at www.flareplay.com/hardware/licensing Use of flarePlay
products constitutes acceptance of, as well as agreement to, those
license terms.
For more information about all flarePlay products, What’s in the Box and
Device Spec. please visit www.flareplay.com/hardware
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
flarePlay console or Controller and their warranty.
Model:
FCC ID:
FC11001
2AATXFC11001
Federal Communications Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Regulatory Information

Summary of content (1 pages)