Step 1 HOW DO I SIGN UP TO THE PLAYERMAKER APP ? Step 2 HOW DO I START A SESSION ? Step 3 HOW DO I STRAP MY PLAYERMAKER DEVICE ONTO MY CLEATS? Step 4 HOW DO I CHARGE MY SENSORS ? Step 5 HOW DO I END MY SESSION AND SYNC THE DATA ONTO THE APP
HOW DO I SIGN UP TO THE PLAYERMAKER APP? STEP 1 - Download the Playermaker app 1. Go to your App Store or Google Play Store. 2. Download the Playermaker app onto your mobile phone. Step 2 - Sign up 1. Open the Playermaker app. 2. Press 'Sign-Up'. 3. Select 'Let's go'. Step 3 - Set up your profile 1. Set up your player profile by adding your personal and playing information. 2. You can optionally assign yourself to a specific team by pressing on the Playermaker FC logo. 3.
Step 4 - Verify your account 1. Next, a verification code will be sent to the email address that you used to sign up. 2. Go to your email and retrieve your verification code. 3. After, enter your verification code onto the app and press 'confirm'. Step 5 - Activate your Playermaker subscription You'll now be taken to 'Account Activation' where you will need to enter your new Activation code. Enter your Activation code onto the app. Your Playermaker subscription will now be activated.
*Your sensors and phone must be within Bluetooth reach for 'Rec' to appear.* HOW TO START A SESSION Things you will need with you to start your session: 1. 2. 3. Playermaker case playermaker sensors playermaker straps Your sensor lights should now turn blue. The blinking blue will indicate that your session is automatically being recorded- you can also view this from the activities screen in your app. 2nd stage 1st stage 3rd stage Remove both sensors from the playermaker case.
HOW DO I CHARGE MY SENSORS? 1. 2. 3. Place both sensors inside the Playermaker case. Plug the charging cable into the bottom of the case and into a power source. Check that your sensors' lights are flashing a solid color (red / orange / green). ● ● A solid color (light) indicates that your sensors are charging successfully. A blinking color (light) indicates that your sensors are not charging successfully. Charging facts, tips, and recommendations: 1. Charge your sensors after each performed activity. 2.
HOW DO I END A SESSION AND SYNC MY DATA ONTO THE PLAYERMAKER APP?
HOW DO I END A SESSION AND SYNC MY DATA ONTO THE PLAYERMAKER APP? How to end your session: 1. Remove your sensors from your straps. 2. Place your sensors back inside the Playermaker case (this action triggers your session to end). 3. Your sensor lights should now blink white. 4. A white blinking light indicates that your session's data is stored in the sensor and is ready to be synced onto the app. 5. NOTE: Only one session can be stored on your sensors at a time.
How to sync your data onto the app: 1. Turn your phone's Bluetooth ON. 2. Make sure you have a stable internet connection. 3. Make sure your sensors are paired to the app. 4. Keep your phone and sensors in close proximity to one another. 5. Open the Playermaker app. 6. A new activity will pop up on your app screen. 7. Select the relevant activity type: Match or Training. 8. After, fill out your activity details. 9.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.