Instruction Manual

ManualsBrandsPlatinum Tools ManualsElectronicsReplacement Blade Set for 15041C

P/N 15041 BR1 MULTI–STRIPPER INSTRUCTIONS

IS15041

Stripping Coax:

1. Make sure the correct cable size (RG59/6 or RG7/11) is

displayed on the front or side of the cassette. The

cassette is reversible and easy to change. Pull it out,

rotate and re-insert with the correct cable size showing.

Note: To remove cassette, use both sides of the cassette

and pull out and away from the front end. (See red arrows in

Fig 1)

2. For best

performance,

rotate stripper

in same

direction as

the arrow

molded on

side of tool

(see red

arrow)

Do NOT use on live circuits!

Cutting blades are extremely sharp. Handle with care.

www.platinumtools.com ©Platinum Tools, Inc.

7 8

Built-in Cutters

for Cutting:

Fig 4: For cutting multiple or

single conductor wires (See

red arrow)

Fig 5: For cutting round

cables (See red arrow)

Stripping Twisted

Pair (UTP & STP)

3. Use the second

stripping hole. Stripping

depth is adjustable to

accommodate a range

of cables. (See red

arrows in Fig 3)

NOTE: For best

results, score your

cable jacket!

6. Grip the ends of a pair

using the serrated teeth

inside the front end of the

tool (see red arrow in Fig

7. De-twist UTP/STP

cable

8. Use channels on top of

tool for straightening wires

the de-twisted wires

Separating & Straightening Twisted Pairs