User's Manual

JB-BA-100m JayBird Bluetooth® Adapter for MP3 User Guide
User Manual Specs:
• 3.5” wide by 5.5” tall
• One color on white paper (black ink)
FRONT COVER
JB-BA-100m
JayBird Bluetooth® Adapter for MP3
Easy-step Instructions
[JayBird Logo]
For use with the JB-100 JayBird Bluetooth® Stereo Headset
[image or line drawing of headset]
COPY (starting on the inside cover)
Introduction:
The JayBird Bluetooth® Adapter for MP3 enables virtually any MP3 player (or
other audio device that has a 3.5mm headphone jack) to transmit stereo audio to
your JB-100 JayBird Bluetooth® Stereo Headset (up to a 30 foot range).
Charging and Battery Status
The first step is to fully charge your Bluetooth® Adapter.
1. Remove the plastic insert from the Charger Dock that came with your
JayBird Bluetooth® Stereo Headset. [See Figure 1]
2. Plug in the Bluetooth® Adapter. The gold metal contacts on the adapter
should be facing DOWN. [See Figure 2]
3. Make sure that your Charger Dock is plugged in to the AC Wall Adapter
and an AC outlet or plugged into any open USB port. The LED on the
adapter should be on.
4. Once the RED LED turns off, your adapter is fully charged (about 2 hours)
5. After about 5-6 hours of use, the LED will blink alternating blue and red
colors. This is an indication that it is time to re-charge your adapter. Just
follow steps 2-4 above.