User's Manual

JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide

User Manual Specs:

• 3.5” wide by 5.5” tall

• One color on white paper (black ink)

FRONT COVER

JB-BA-100i

JayBird Bluetooth® Adapter for iPod

Easy-step Instructions

[JayBird Logo]

For use with the JB-100 JayBird Bluetooth® Stereo Headset

[image or line drawing of headset]

[Made-For-iPod logo]

COPY (starting on the inside cover)

Introduction:

The JayBird Bluetooth® Adapter for MP3 enables any compatible iPod® (see list

below) to transmit stereo audio to your JB-100 JayBird Bluetooth® Stereo

Headset (up to a 30 foot range).

The JayBird Bluetooth® Adapter for iPod is compatible with the following iPod®

models:

• iPod Nano

• iPod with video (5G)

• iPod mini

• iPod (4G, photo)

The JayBird Bluetooth® Adapter for iPod is powered by the iPod once connected

to the iPod dock connector, so no batteries are required.

PAGE 1
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide User Manual Specs: • • 3.5” wide by 5.
PAGE 2
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide Pairing the adapter with your JayBird Bluetooth® Stereo Headset 1. Plug the adapter into the iPod® Dock Connector. The LED should be facing UP (same side as the front of the iPod®) 2. Turn the iPod® on and start playing music. The LED on the adapter will be steady blue color while it is in search mode. 3. Make sure that your headset is turned off. 4.
PAGE 3
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide TECHNICAL SPECIFICATIONS Protocol Bluetooth 1.2, A2DP Frequency Band 2.4 GHz Tx Power Bluetooth Class 2 Range 10 meters/33 feet Audio Format 16-bit Stereo Music Playing Time Draws power from iPod Battery No battery - draws power from iPod Charging No charging required - draws power from iPod Weight:(Grams) 6.
PAGE 4
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.