CS4 KARE Audio Products 2.4 GHz Low-latency Wireless Audio with DSP BY KARE AUDIO User Guide 1.
Table of Contents FCC Notice ___________________________________________________________________ 2 1 Year Limited Warranty ________________________________________________________ 2 Parts ________________________________________________________________________ 3 Welcome_____________________________________________________________________ 4 Safety Notices ________________________________________________________________ 4 Health Considerations __________________________________________________________ 5 Liste
FCC Notice Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Parts Quantity Part # Description 1 610-36 Optical Cable 1 811 RCA to 3.5mm 1 RFA1-HP-C 3.5mm to 3.5mm 1 RFA1-PS USB Power Adapter 1 RFA1-PC USB A to Micro USB B 1 RFA1 Transmitter 1 CS4S Set of Speakers 1 CS4S-PC-L Power Supply for Speakers 1 VC12 Hook and Loop Image 3 K KARE Audio 1.
Welcome Congratulations on your new ChairSpeaker®, designed to help you and your loved ones watch TV together in a new way. We appreciate your product selection and would like to use this guide to welcome you to our family. We hope that you will take the time to read this manual to familiarize yourself with the product. This user guide will assist you and answer any questions you may have with setting up and using your new ChairSpeaker.
• The power cable should be routed clear of foot traffic and supported clear of kinking and abrasion. • Only use ChairSpeaker accessories and attachments with your ChairSpeaker system. • Users should not attempt to service this product. Servicing for damages in any way should only be done by an authorized service agent. • Do not use damaged products.
Listening Device Warning Do not listen to high volume levels for long periods to prevent possible hearing loss. Listening Devices are intended to amplify sounds in situations that would be difficult for normal hearing individuals to hear. A listening device is NOT a hearing aid and is not intended to treat hearing loss. It is not intended to diagnose, treat, cure any disease, or alter the structure or function of the body.
Identifying and Using Features ❶ Microphone Input ❺Optical Output ❷ Optical Input ❻ 5 Volt In ❸ Coaxial Input ❼ Mode Button ❹ Analog Input 7 K KARE Audio 1.
Powering the Transmitter Use the included micro-USB cable (RFA1-PC) to power to the transmitter. Audio is not input on this port. In some cases, the USB port on the back of your TV or audio device can provide power. If you have "buzzing or hissing" on an audio channel, use the included wall adapter (RFA1-PS). Connecting Signal Choosing the input signal is critical to getting the most enjoyable experience. First, identify what outputs are available on your TV.
36). Remove plastic covers from the end of the optical cable before inserting them into the TV and transmitter. This type of connection snaps in place when securely inserted. ❸ Coaxial Input Use cable (RFA-COAX) sold separately. This single RCA coaxial cable is often colorcoded orange or black. You might find some that are not colored correctly, so it's always best to double-check the labeling of the connection. The output on your TV may be labeled as SPDIF or digital out.
only an optical passthrough. This output does not have sound processing or decoding on this audio stream. DSP (Digital Signal Processing) The digital signal processing in SonicCast RFA1 is designed to improve your audio experience and simplify setup. The DSP decodes audio, including 5.1 sound, and can provide the sound enhancements described below. DSP Modes Direct Sound The Direct Sound mode will decode audio and, if required, downmix to 2 channels.
Narrow Voiceify AI Narrow Voiceify AI focuses its intelligibility algorithms on sounds in the 1kHz to 6kHz range. Narrow Voiceify AI also enables Voice Priority Surround Sound and Calm Commercial Technology. Wide Voiceify AI Wide Voiceify AI applies AI algorithms to voices in the 0.5kHz to 8kHz range. Wide Voiceify AI also enables Voice Priority SS and Calm Commercial Technology. Full Voiceify AI Full Voiceify AI applies AI algorithms to voices in the entire audio range.
Selecting DSP Modes The mode button ❼ allows you to set DSP and adjust the delay. The Mode LED indicates these settings on the top of the transmitter ❽. A short press of the mode button cycles through the DSP modes.
Network & Audio Status The Status LED ❾ indicates the status of both the audio input and if a receiver is connected. Audio Input Status Not Connected Connected Connected Device Connected No status until Audio Connected No Receiver Connected Receiver Paired Status LED Breath Red Fade Yellow Solid Green Pairing RFA1 broadcasts a pairing beacon when you can add additional receivers. To pair another receiver, please see the specific receiver guide.
you have an issue pairing to the correct RFA1, turn one-off. Pair, then you can repower the second RFA1. To pair transmitter with speaker simply press the pairing button for 5 seconds. The speaker status light will turn solid blue or purple when paired. 2 devices can be paired with one transmitter. Transmitter Placement and Mounting Careful consideration should be used when choosing placement for the RFA1.
Wrap the speakers around the chair's headrest with the volume knob on the left for the user at about ear height. 15 K KARE Audio 1.
Next plug the speaker into the wall. You will need to charge your speakers for 4 hours to get a full charge. You can charge while in uses. Turn on the speaker using the volume knob located on the front of the left speaker as a user is sitting in the chair.
Customer Support If you encounter some unresolvable issue or have any questions, suggestions, or concerns, please contact KARE's customer service department for further assistance. Website: kareaudio.com Email support@kareaudio.com Customer Support: 1-888-277-7941 17 K KARE Audio 1.