Installation Guide
Premium Textured Speed Hump
• 2” High, 20” sections
• Use in heavy traffic areas
• Made of durable vulcanized rubber
- performs well in extreme temperatures
• Textured surface helps with traction
• 6 rectangular yellow stripes per section
- high visibility, non-wearing color
SPEED BUMPS,SPEED HUMPS
& CAR STOPS
Plasticade.com
TF018 Rev. 17
• Resistant to weather, oil, salt, moisture, UV light, and temperature
• Will not warp, chip, or crack
• Never needs painting, durable striping
• 44,000 lbs./axle weight bearing capacity
• Flexible, conforms to surface contours
• Install on asphalt or concrete (hardware sold separately)
• Removable for road surface maintenance or snow plowing
PARKING STOPS
SPEED HUMPS
Standard Speed Hump
• 2.4” High, 24” sections, made from recycled rubber
• For traffic speeds 15 mph or less
• Gentler than speed bumps
- good for heavy truck traffic areas
• Reflective stripes in yellow
• Dual bottom channels for drainage
- protects wire, hose, or pipe to 3/4” dia.
• Made in the USA
SPEED BUMPS
Premium Textured Speed Bump
• 2” High, 6’ sections
• Use in heavy traffic areas on low speed roadways
• Reduces speeds 1-5 mph
• Textured, vulcanized rubber performs
well in extreme temperatures
• Cat eye reflectors included for
increased visibility at night
• 5 synthetic rubber yellow stripes,
(EPDM) won’t degrade
• Dual bottom channels for drainage
- protects wire, hose, or pipe
• End caps and hardware sold separately
Low Profile Speed Bump
• 2” High, 6’ sections, made from recycled rubber
• Reflective yellow tape is embedded in the rubber, increases visibility
• Good for alleys, reduces speeds 1-5 mph
• Cut with a utility knife if necessary
• Optional cat eye reflectors
• Dual bottom channels for drainage, protects wire, hose, or pipe
• End caps and hardware sold separately
• Made in the USA
Comes with 8
Cat Eye Reflectors
Standard Speed Bump
• 2.5” High, 6’ or 4’ sections, made from recycled rubber
• Reflective yellow tape is embedded in the rubber, increases visibility
• Good for parking lots & slow roadways, reduces speeds 2-5 mph
• Cut with a utility knife if necessary
• Optional cat eye reflectors
• Dual bottom channels for drainage, protects wire, hose, or pipe
• End caps and hardware sold separately
• Made in the USA
End Caps
are optional
Standard 2.5”HLow Profile 2”H
• Use in parking lots and garages
- protects garage walls, delineates spaces
• Available in 6 foot or 4 foot lengths
• Maintenance Free
• High visibility at night
- reflective stripes in yellow or white
• Made in the USA using recycled rubber