Specification

130 Graham St. SW, Grand Rapids, MI 49503 • 616-454-3100 • [e-mail] • www.trufastwalls.com
ALTENLOH, BRINCK & CO. - GROUP
Bulletin No. TFW-2012
PLASTI-GRIP
®
PMF ANCHOR
CONTINUOUS INSULATION ATTACHMENT TO MASONRY. REDUCES THERMAL BRIDGING.
Pre-drill hole with 5/16" masonry bit, then tap PMF with hammer until ush. The 2-3/8" diameter head permanently attaches
insulation with a ush nish. The solid plastic design reduces thermal-bridging by eliminating inecient screws / pins.
PRODUCT FEATURES
•
Attaches all types of rigid insulation to concrete or
masonry substrates.
•
2-3/8" diameter washer head
•
Simple to install - Drill and hammer.
•
No pins, screws, or adhesives required.
•
Solid plastic design reduces thermal-bridging by
eliminating inecient screws / pins.
•
Textured head design for basecoat adhesion when
used with EIFS system.
PMF LENGTH INSULATION THICKNESS
2" 1/2" - 3/4"
2-3/4" 1" - 1-1/2"
3-1/2" 1-1/2" - 2"
4-1/2" 2-1/2" - 3"
5-3/8" 3-1/2" - 4"
6-1/4" 4-1/2" - 5"