User Guide Bluetooth® Headset with Digitally Enhanced Sound for Clear Conversations
TABLE OF CONTENTS Package Contents & Features 3 Charging 4 Pairing 6 Powering 7 Adjusting Fit 8 Using Your Headset 9 Indicator Lights 11 Optional Accessories 12 Troubleshooting 13 Product Specifications 13 Technical Assistance 14 Warranty 14 Regulatory Notices 15 WELCOME Thank you for purchasing a Plantronics headset. Let us provide you with the best possible service and technical support.
PACKAGE CONTENTS & FEATURES TM PLANTRONICS DISCOVERY 655 AND 665 Indicator light Call control button (on/off) Volume/mute buttons Microphone Ear loop Soft gel ear tips small medium large Headset charging pocket DISCOVERY 655 ACCESSORIES AAA battery AC charger AAA battery charger Mini USB charger Mini USB-to-USB charging cable DISCOVERY 665 ACCESSORIES Vehicle charging adapter USB charge cable 3
CHARGING PLANTRONICS DISCOVERY 655 Before using, you must first charge your headset. 1 hour = minimum charge 3 hours = full charge Option A: Using the included AC charger The indicator light flashes red while charging and turns off when fully charged. 1. Plug the AC charger into the base of the charging pocket and connect it to your power source. 2. Insert the headset into the charging pocket. Option B: Using a AAA battery One AAA battery recharges the headset to full capacity up to three times. 1.
CHARGING Option C: Using the Mini USB-to-USB charging cable 1. Snap the mini USB charger to the charging pocket. 2. Use the mini USB-to-USB charging cable to connect the headset to your computer or laptop. 3. Turn your computer or laptop on. C Mini USB charger PLANTRONICS DISCOVERY 665 Before using, you must first charge your headset. 1 hour = minimum charge 3 hours = full charge Option A: Using the vehicle charging adapter. 1. Snap the headset charging pocket onto the vehicle charging adapter as shown.
PAIRING 1. 2. 3. Before using your headset for the first time, you must pair it with your Bluetooth phone or device. Be sure the headset is fully charged. For set up and pairing instructions with Bluetooth devices other than mobile phones, please consult your Bluetooth device user guide. Begin with headset turned off. 1. Press and hold down the call control button for 10 seconds until the headset status indicator begins to flash red then blue. The headset is now in pairing mode for the next 120 seconds.
POWERING 1. Turn on the headset by pressing and holding the call control button until the indicator light glows blue. If you are wearing the headset, you will hear a beep when the power turns on. The indicator light will flash blue every 5 seconds when the power is on. 2. Turn off the headset by pressing the call control button for 6-8 seconds until the indicator light glows red or until you hear the beep. The indicator light remains unlit when the power is off.
ADJUSTING FIT Right Ear R L N Left Ear 1. 2. The Plantronics Discovery 655 and Discovery 665 headsets come with three soft gel ear tips and an optional ear loop. 1. The medium-sized ear tip is preinstalled and aligned for wearing on the right ear (R). 2. For left ear wearing, twist the ear tip counter clockwise. 3. Place the headset into your ear and check to see that it fits comfortably. If the headset is either too tight or too loose, remove the medium- 3. 4.
USING YOUR HEADSET ANSWERING/ ENDING/MAKING CALLS To answer or end a call, briefly press the call control button. To make a call, enter number on your phone, press send, and the call is automatically transferred to the headset; no need to press the call control button. NOTE When answering a call, wait until you hear a ring from the headset itself (not the ring from your phone), before pressing the call control button.
USING YOUR HEADSET ADDITIONAL FEATURES Redialing Last Number Using Voice Dialing To activate last number redial, double press the call control button. You will hear a high tone after each double key press. With the headset on, press and hold the call control button for 2 seconds to activate voice dialing. NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions.
INDICATOR LIGHTS Headset Status Powering on Headset Indicator Light Blue light appears and flashes every 6 seconds Power on Blue light flashes every 5 seconds. Powering off Red light appears and goes off. Power off — Charging battery Red light flashes every 5 seconds. Battery fully charged Red light goes off. Low battery Red light flashes every second. Pairing mode Red then blue light flashes for 120 seconds Missed call Purple light flashes every 5 seconds. Press any button to cancel.
OPTIONAL ACCESSORIES AVAILABLE FOR PURCHASE 73646-01 Vehicle Charging Adapter 73649-01 AAA Battery Charger 69519-01 USB Headset Charger MOTOROLA PALM NOKIA SONY 73650-01 4-pack Charge Adapter Kit 73647-01 Soft Gel Ear Tips and Ear Loop 73651-01 Mini USB Charger To order, please contact your Plantronics supplier or go to www.plantronics.com.
TROUBLESHOOTING PROBLEM My headset does not work with my phone. SOLUTION Headset was not in pairing mode when mobile phone menu selections were made. See page 6 “Pairing”. Incorrect menu selections were made on your mobile phone. See page 6 “Pairing”. I did not enter my passkey. Your phone did not locate the headset. Repeat the pairing process on page 6. Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 6. Callers cannot hear me. Mute is turned on.
TECHNICAL ASSISTANCE Visit our Web site at www.plantronics.com/support for technical support including frequently asked questions, compatibility and accessibility information. The For Technical Assistance contact Plantronics: In Australia: 1-800-793-150; or 1-800-428-526 In New Zealand: 00-800-5444-6600 WARRANTY LIMITED WARRANTY • This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in Australia and New Zealand.
REGULATORY NOTICES FCC REQUIREMENTS PART 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 USA Tel: (800) 544-4660 www.plantronics.com © 2006 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Discovery and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. Patents U.S.
