BackBeat FIT 300 Series User Guide
Contents Inline controls overview Be safe 3 Pair 4 Get paired Pair mode 3 4 4 Basics 5 Power on or off 5 Answer or end a call 6 Adjust the volume 6 Music and more 7 Reconnect 10 Mute the headset 10 Redial 10 Charge and fit 11 Charge 11 Get the best sound 11 Wear the headset 12 Headset Features 13 Quick charge 13 Pair multiple devices 13 Use two devices 13 Voice control 14 Voice prompts 14 DeepSleep Mode 15 Install the app 15 Support 16 2
Inline controls overview :02 :02 voice :04 :02 :04 :02 Charge port Headset indicator light (LED) Center button: Play/pause music Center button: Activate voice dialing, search and other smartphone controls Center button: Answer/end/decline call Center button: Redial Center button: Power on/off Center button: Status check; battery level and connection status + Volume up button: Skip to next track + Volume up button: Increase volume + Volume down button: Play previous track + Volume down button:
Pair Get paired The first time you power on your headset, the pairing process begins. 1 2 Power on the headset by pressing the Center button until you hear "pairing" and the LED light flashes red and blue. Activate Bluetooth® on your phone to search for new devices. • iPhone > Settings > Bluetooth > On* • Android > Settings > Bluetooth > On > Scan* NOTE *Menus may vary by device. 3 Select “PLT BBFIT300 SERIES .” If necessary, enter four zeros (0000) for the passcode or accept the connection.
Basics Power on or off Press the Center button for 2 seconds until you hear 'power on or 'power off'.
Answer or end a call Adjust the volume Tap the Center button. Tap the Volume up (+) or down (–) button.
Music and more Listen to your music, podcasts, navigation and other streaming audio on your headset. NOTE Functionality varies by application. Play or pause audio Tap the Center button. Skip to next track Press the Volume up (+) button for more than 1 second.
Restart track While audio is being paused, tap the center button, you hear the track restart. Play previous track Press the Volume down button until you hear the confirmation tone to restart the current track. Press the button twice (each press until the confirmation tone sounds) to go to the previous track. Access music and call controls Access the inline control with your right hand or left hand-whichever feels most natural.
L R .
Reconnect If your headset loses Bluetooth connection with your phone, it will automatically try to reconnect. If your headset can't reconnect, tap any key once or manually connect through the phone's Bluetooth. If your headset remains out of range for more than 90 minutes, the DeepSleep mode will activate. Mute the headset Redial During a conversation, press and hold the Volume up button or the Volume down button until you hear “mute on” or “mute off." An alert repeats every 15 minutes when mute is on.
Charge and fit Charge The door covering the charging port is located on the left side of the control panel. Open it with your fingernail. For best performance, fully charge your battery before use. It takes up to 2 hours to fully charge the headphones from a completely drained battery state. While charging, the indicator light is red and turns off once charging is complete. Get the best sound For the best sound, a good seal with your ear canal is essential.
Wear the headset 3 Replace the eartip Push the eartip onto the earbud tip marked with the "L" or "R" with the notch on the rubber eartip lining up with the raised plastic notch in the earbud tip. 4 Clean the eartip When eartips get soiled, it is recommended that you wipe the eartip with an alcohol wipe or a cotton swab dipped in Isopropyl alcohol. The alcohol will kill bacteria that may cause an odor and wipe away any dirt and earwax.
Headset Features Quick charge Pair multiple devices Use two devices Charge empty battery 15 minutes for up to a full hour of music listening. Your earbuds can pair and connect 2 devices. To enter pair mode after the first pairing process, start with the earbuds powered on and idle. Press and hold the Volume up and the Volume down buttons together until you hear 'pair mode' and the LED flashes red and blue. It's easy to answer calls from two devices.
Voice control Voice prompts Siri, Google Now™, Cortana When not on a call, press and hold the Voice button for 2 seconds until you hear the tone. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Your headset tells you about status changes.
DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone for 120 minutes, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone, press the Center button button to exit DeepSleep mode. Install the app Get the most from your headset by installing our free mobile app, Plantronics Hub for iOS/ Android.
Support EN 0800 410014 FI 0800 117095 NO 80011336 AR +44 (0)1793 842443* FR 0800 945770 PL +44 (0)1793 842443* CS +44 (0)1793 842443* GA 1800 551 896 PT 800 84 45 17 DA 80 88 46 10 HE +44 (0)1793 842443* RO +44 (0)1793 842443* DE Deutschland 0800 9323 400 Österreich 0800 242 500 Schweiz 0800 932 340 HU +44 (0)1793 842443* RU 8-800-100-64-14 +44 (0)1793 842443* EL +44 (0)1793 842443* IT 800 950934 SV 0200 21 46 81 ES 900 803 666 NL NL 0800 7526876 BE 0800 39202 LUX 800 24870 TR +44 (0)17
