BackBeat SENSE User Guide
Contents Overview 3 Headset overview What's in the box 3 4 Pair 5 Get Paired 5 Pair second device Pair to Mac 5 5 Charge and fit 6 Charge 6 Adjust the fit 6 The basics 7 Play/pause music 7 Volume 7 Track selection 7 Activate voice assistant 7 Open mic 7 Make/Take/End Calls 7 Mute 7 Flexible power 7 More Features 8 Use sensors 8 Enable HD voice Customize 8 Support 8 9 2
Overview Headset overview [ ]= Volume up/down Track forward Play/pause music Track backward Mute/unmute; Open mic Charge port Headset LEDs [] Call button Power switch Bluetooth pair button 3
What's in the box Headphones Carrying case Charging cable 3.
Pair Get Paired The first time you power on your headphones, the pairing process begins. 1 2 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue. Activate Bluetooth® on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. 3 Select “PLT_BBTSENSE.” If necessary, enter four zeros (0000) for the passcode or accept the connection.
Charge and fit Charge It takes up to 2.5 hours to fully charge your headphones. The LEDs turn off once charging is complete. = = = = = TIP To check the headphones battery status, tap the Call button [ ] while wearing your headphones. Headphones must be in idle state. Your headphones have up to 18 hours of listening time. Adjust the fit Adjust the headphones for a comfortable fit. Lengthen or shorten the band until it fits comfortably.
The basics Play/pause music Tap the Play/pause button. Volume Toggle the Volume wheel forward (+) or backward (–) to control the volume. Track selection Activate voice assistant Open mic Make/Take/End Calls Tap the Forward button or Back button to control the track selection. If your smartphone has a voice-enabled assistant, press and hold the Call [ ] button for 2 seconds and wait for the phone prompt. Tap the red button to hear your natural surroundings (your music/audio will pause).
More Features Use sensors Smart sensors respond when you put on or take off your headphones. Putting on your headphones will: • Resume music • Answer a call Taking off your headphones will: • Pause music (while music is playing) • Transfer active call to phone • Set timer for DeepSleep TIP To disable the sensors, hold both the Mute and Call [ ] buttons for more than 6 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue.
Support EN Tel: 0800 410014 FI Tel: 0800 117095 NO Tel: 80011336 AR Tel: +44 (0)1793 842443* FR Tel: 0800 945770 PL Tel: +44 (0)1793 842443* CS Tel: +44 (0)1793 842443* GA Tel: 1800 551 896 PT Tel: 0800 84 45 17 DA Tel: 80 88 46 10 HE Tel: +44 (0)1793 842443* RO Tel: +44 (0)1793 842443* DE Deutschland 0800 9323 400 Österreich 0800 242 500 Schweiz 0800 932 340 HU Tel: +44 (0)1793 842443* RU Tel: 8-800-100-64-14 Tel: +44 (0)1793 842443* EL Tel: +44 (0)1793 842443* IT Tel: 800 950934 SV Tel:
